Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
Median Price
$99.185
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$88.170
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$90.820
$63.643
$63.056
Bürklin Elektronik
$107.550
$94.650
Newark
$120.880
Verical
$126.588
Chip1Stop
$79.100
Nova Conductors
$83.310
TME
$100.470
Vyrian
VNN
Corohmni
$2.377
Advanced Electronics
$2.472
$2.348
Aztec Data Supply Inc.
$2.890
Ampacity Inc.
$65.170
Semicontronic
$63.541
$63.215
Continental Prestige Electronics
$71.880
Netroflash
$79.144
$77.478
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Having UL, CSA, and ENEC-10 approvals ensures that the product meets international safety standards and regulations, making it a reliable choice for use in various applications.
The 250V rated voltage makes this EMI mains filter suitable for use in a wide range of electrical systems, providing effective filtering and protection.
The single-phase EMI filter design helps in reducing electromagnetic interference and noise, improving the overall performance and reliability of connected equipment.
With a width of 84mm, this EMI mains filter can easily be integrated into different electronic devices and systems, offering space-saving benefits.
Supporting an operating frequency of 50/60Hz, this EMI filter is compatible with standard power systems, ensuring efficient filtering and protection.
The 99mm length of this EMI mains filter provides a compact form factor, making it easy to install and integrate into various electronic setups.
With a high pot value of 2700V, this EMI filter offers robust insulation and voltage withstand capabilities, enhancing safety and reliability in electrical circuits.
The maximum leakage current of 0.5mA ensures efficient filtering and suppression of unwanted electrical noise, maintaining the integrity of connected equipment.
Featuring a panel mount design, this EMI mains filter can be securely attached to a surface, offering ease of installation and maintenance in various applications.
The compact dimensions of 99x84x38.1mm make this EMI filter suitable for space-constrained installations, ensuring versatility and flexibility in different setups.
With a rated current of 20A, this EMI mains filter can handle high power loads effectively, providing reliable filtering and protection in demanding electrical environments.
The 38.1mm height of this EMI filter contributes to its low-profile design, enabling easy integration and placement in electronic systems without adding unnecessary bulk.
EMI Mains Filters B84112B0000B120 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Weitronic Enterprise
Goodwork Semiconductor
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
6EDP
TE Connectivity
TE Connectivity's 6EDP EMI Mains Filter offers UL, CSA, VDE approvals. With insertion loss ranging from 10 dB to 40 dB, it operates at 50/60Hz frequency and rated voltage of 250V. Ideal for PCB mounting, this single-phase filter has a compact size of L36.6xB31.5xH24.15mm and is suitable for applications requiring up to 6A current handling capacity.
RSEN-2010D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 35 mm; Maximum Leakage Current: 1 mA; Approvals (V): UL; CSA; EN; Maximum Operating Temperature: 85 Cel;
FN2020A-20-06
Schaffner Holding Ag
The Schaffner Holding Ag FN2020A-20-06 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 23A rated current. It has approvals from UL, CSA, and ENEC-14. This chassis mount filter operates at temperatures ranging from -25°C to 100°C, making it ideal for applications requiring effective electromagnetic interference suppression.
SSHB21HS-08200
KEMET Corporation
KEMET Corporation's SSHB21HS-08200 is a UL-approved EMI mains filter with 100 Mohm min insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 130°C and has a max high pot of 500V. Ideal for through-hole mounting applications requiring 0.8A current handling capacity.
30VSK6
TE Connectivity's 30VSK6 EMI Mains Filter is UL, CUL, VDE approved with a rated voltage of 250V. It features a single-phase filter type, 30A rated current, and operates at temperatures from -10 to 40°C. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
FN2010B-16-06
Schaffner Holding Ag's FN2010B-16-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and can handle a high pot of 2500V. This single-phase filter is panel mountable and ideal for applications requiring effective electromagnetic interference suppression.
CMS1-5-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; Height: 2.6 mm;
SSB11V-R17043
KEMET Corporation's SSB11V-R17043 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 1.7A current. Operating b/w -25°C to 130°C, it is ideal for EMI mains filtering applications. With dimensions of L22.0xB14.5xH21.5 mm, this filter offers through-hole mounting in trays for efficient installation.
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
SS11VL-R07190
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Terminal Finish: NOT SPECIFIED; Rated Voltage: 250 V; Length: 22 mm; Additional Features: INDUCTANCE 19 MILLIHENRY;
SSHB21H-R25056
KEMET SSHB21H-R25056 is a UL approved EMI mains filter with 250V rating and 2.5A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and withstands up to 500V high pot test. Ideal for single-phase EMI filtering applications due to its compact size (23mm x 26mm x 15.5mm) and through-hole mounting design.
RSHN-2016D
TDK
The TDK RSHN-2016D EMI Mains Filter is a single-phase filter with UL, CSA, and EN approvals. It has a rated voltage of 250V and rated current of 16A. With dimensions of L127.0xB52.0xH35.0 (mm), it is ideal for DIN rail mounting applications in environments with operating temperatures ranging from -25°C to 85°C.
SS26V-070510
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 51 MILLI HENRY; Terminal Finish: NOT SPECIFIED;
SS11V-06180-CH
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 75 Cel; Dimensions: L22.0XB14.5XH21.5 (mm)/L0.866XB0.571XH0.846 (inch);
CMS3-2-R
Eaton Corporation
Eaton Corporation's CMS3-2-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.1A. Ideal for surface mount applications due to its compact size of L11.43xB11.43xH6.0mm, it features Tin/Silver/Copper terminal finish in tape and reel packaging.
PLA10AN2230R4D2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Additional Features: INDUCTANCE 22 MILLI HENRY; SECTIONAL WINDING TYPE; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Maximum Operating Temperature: 120 Cel; Height: 17.5 mm;
744839010400
Wuerth Elektronik & Kg
Wurth Elektronik 744839010400 is a 750V rated THREE PHASE EMI FILTER with 40A current. It operates b/w -40°C to 125°C, suitable for IEC approvals in applications requiring EMI mains filtering. Measuring 70mm in diameter and 39mm in height, it mounts through hole for use at 50Hz frequency.
FMW-65-0002
Schurter Ag
Schurter Ag's FMW-65-0002 is a THREE PHASE EMI FILTER with a rated voltage of 440V. It has a max operating temperature of 100°C and a high pot of 3000V. This panel mount filter is suitable for applications requiring EMI mains filtering.
CMS1-6-R
CMS1-6-R by Eaton Corp is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 3.1A. This single-phase filter is surface-mounted and compactly sized at L9.4xB7.2xH2.6mm, suitable for various electronic applications.
RSEL-2002WL
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 50 mm; Maximum Operating Temperature: 85 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84112B0000B020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Width (mm): 45; Maximum Leakage Current: .5 mA;
B84134-F12-A1
THREE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50/60Hz; Length: 125 mm; Manufacturer Series: B84134-F; Height: 60 mm;
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
B84111F0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10; Height: 26 mm; Length: 43.5 mm;
B84112G0000G125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Length: 91 mm; High Pot: 2700 V;
TDK-Lambda
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Approvals (V): CSA;EN:EC;UL;IEC; High Pot: 2700 V; Maximum Operating Temperature: 100 Cel; Length: 91 mm;
B84110A0000A010
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
B84111A0000B120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Additional Features: TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS; Width (mm): 63.5;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
B84112B0000B110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 63.5 mm; Approvals (V): UL; CSA; ENEC-10; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CUL; ENEC-10; Height: 29 mm; Maximum Leakage Current: .5 mA; Length: 63 mm;
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L63.0XB52.0XH29.0 (mm)/L2.48XB2.047XH1.142 (inch); Length: 63 mm; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10;
B84143A0008R105
THREE PHASE EMI FILTER; Rated Current: 8 A; Mounting Type: PANEL MOUNT; Additional Features: TERMINAL BLOCK CONNECTIONS; No. of Terminals: 6; Operating Frequency (Hz): 50/60Hz;
B84143A0025R105
THREE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; Length: 231 mm; No. of Terminals: 6; High Pot: 2720 V;
B84111A0000A030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V;
B84131-M1-G135
THREE PHASE EMI FILTER; Rated Current: 35 A; Width (mm): 104; Mounting Type: PANEL MOUNT; Approvals (V): UL; CSA; VDE; High Pot: 2700 V;
B84112B0000A110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Operating Frequency (Hz): 50/60Hz; High Pot: 2700 V; Width (mm): 50.8; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved