Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B84143A0025R105 is a 520V UL/ENEC-10 approved EMI mains filter with 6 terminals. It offers a rated current of 25A, high pot of 2720V, and max leakage current of 15mA. Ideal for panel mounting in applications requiring three-phase EMI filtering at 50/60Hz frequency.
Median Price
$138.910
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Farnell
1+ parts
$120.490
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$130.050
$119.070
Master Electronics
$135.560
$115.870
DigiKey
$142.260
$116.731
Newark
$159.730
$147.890
Element14
$202.240
Arrow
Verical
Chip1Stop
Nova Conductors
$113.600
Rapid Electronics
$131.188
IBS Electronics
$148.343
Vyrian
VNN
Greenchips
SIE Connect GmbH - GreenChips
Corohmni
$1.355
Aztec Data Supply Inc.
$3.094
AZTECH Wire
$17.164
Ampacity Inc.
$97.210
Netroflash
Continental Prestige Electronics
$111.328
Argo Parts USA
Authorized Procurement Solutions
Eastek
Having UL and ENEC-10 approvals ensures that the product meets international safety standards and is reliable for use.
Suitable for applications requiring a high rated voltage, providing versatility in usage.
The 6 terminals offer flexibility in connection options, making it easier to integrate into existing systems.
Being a three-phase EMI filter ensures effective electromagnetic interference suppression in three-phase systems.
Compact width allows for easy mounting and integration in crowded spaces.
Suitable for a wide range of applications with common frequencies of 50Hz or 60Hz.
A moderate length that balances between compactness and functionality.
High potential rating ensures product durability and safety during operation.
Low leakage current helps in maintaining safety standards and reducing energy wastage.
Panel mounting allows for secure and convenient installation on equipment or systems.
The specified dimensions provide information about the physical size of the product for compatibility and installation purposes.
With a rated current of 25 A, it can handle moderate to high electrical loads efficiently.
The height of 83mm offers a good balance between compactness and functionality, fitting well into various setups.
EMI Mains Filters B84143A0025R105 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
No. of Terminals:
Operating Frequency (Hz):
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Packaging - Product Identification Label 22/Mar/2019
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Formosa Microsemi
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
NBC-20-472-D
Cosel
Cosel NBC-20-472-D is a 250V UL/CSA/VDE/ENEC-10 approved EMI mains filter with 20A rated current. It operates b/w -40°C to 85°C, offers high pot of 2500V, and has max leakage current of 1mA. Ideal for single-phase applications, it's DIN rail mountable with dimensions of L92.0xB53.0xH41.0mm.
7448012501
Wuerth Elektronik & Kg
Wurth Elektronik 7448012501 is a single-phase EMI filter with 250V rated voltage and 2.5A current. With approvals from ENEC-10 and VDE, it operates b/w -40°C to 125°C making it ideal for applications requiring noise suppression in mains power circuits.
20SRBS1-W
TE Connectivity
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 40 Cel; Minimum Operating Temperature: -10 Cel;
PLA10AN4330R3R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e2; Rated Voltage: 300 V; Length: 18 mm; Minimum Operating Temperature: -25 Cel;
B82722A2102N001
TDK
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
2794123
Phoenix Contact
Phoenix Contact 2794123 is a UL, IEC, VDE approved EMI Mains Filter with 250V rated voltage and 1A rated current. Its single-phase filter type operates b/w -25°C to 100°C, suitable for DIN rail mounting applications. Dimensions: L79.4xB25.0xH90.3 mm (L3.126xB0.984xH3.555 inch).
SS11V-R10093-CH
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Operating Frequency (Hz): 50Hz; Length: 22 mm; No. of Terminals: 4; Height: 21.5 mm;
20VB1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Maximum Leakage Current: .4 mA; Mounting Type: PANEL MOUNT; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
RSEL-2003WL
The TDK RSEL-2003WL is a single-phase EMI filter with 250V rated voltage and 3A rated current. It offers high insulation resistance of 100 Mohm, approvals from CSA, ENEC-14, and UL. Ideal for panel mounting applications in environments ranging from -25°C to 85°C.
CMS2-1-R
Eaton Corporation
Eaton Corporation's CMS2-1-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.35A. Ideal for surface mount applications due to its compact size of L8.89xB8.89xH6.0 mm and tape and reel packing method.
SSRH7HS-M04467
KEMET Corporation
SSRH7HS-M04467 by KEMET is a UL-approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures from -25°C to 120°C, rated for 250V and 0.4A. This single-phase filter, measuring 14.5mm x 18mm x 12mm, is designed for through-hole mounting applications.
TE Connectivity's 20VB1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 7 dB at min frequency and 48 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SSHB21HS-12110
KEMET Corporation's SSHB21HS-12110 EMI Mains Filter has a rated voltage of 250V, rated current of 1.2A, and high pot of 500V. It operates b/w -25°C to 130°C and is UL approved for applications requiring single-phase EMI filtering in various electronic devices.
7448031501
Wurth Elektronik 7448031501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 15A current. It operates b/w -40 to 125 °C, suitable for ENEC-10; VDE approved applications requiring EMI mains filtering at 50Hz frequency.
SSRH7HS-M17023
Mains Filters;
FIL-1S-1-10A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
SCF-05-350
KEMET Corporation's SCF-05-350 is a SINGLE PHASE EMI FILTER with 4 terminals, rated for 250V and 5A. Operating b/w -25°C to 65°C, it is designed for EMI mains filtering applications. With dimensions of L15.0xB12.0xH15.0 mm, this filter is suitable for through hole mounting at a frequency of 50Hz.
SC-03-06G
KEMET Corporation's SC-03-06G is a UL-approved EMI mains filter with 250V rated voltage and 3A current. It offers a min insulation resistance of 100 Mohm, operates b/w -25°C to 105°C, and has dimensions of L17.5xB14.0xH17.5 mm. Ideal for single-phase applications requiring effective electromagnetic interference filtering in compact spaces.
DKIH-3358-50D7-NK
Schurter Ag
DKIH-3358-50D7-NK by Schurter Ag is a 600V rated THREE PHASE EMI FILTER with approvals from IEC and UL. It operates b/w -40°C to 100°C, has a high pot of 3740V, and a rated current of 50A. Ideal for applications requiring EMI mains filtering in industrial settings.
SCF25XV-130-1R5A012JV
SINGLE PHASE EMI FILTER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B84112B0000B120
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84112B0000B020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Width (mm): 45; Maximum Leakage Current: .5 mA;
B84134-F12-A1
THREE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50/60Hz; Length: 125 mm; Manufacturer Series: B84134-F; Height: 60 mm;
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
B84111F0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10; Height: 26 mm; Length: 43.5 mm;
B84112G0000G125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Length: 91 mm; High Pot: 2700 V;
TDK-Lambda
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Approvals (V): CSA;EN:EC;UL;IEC; High Pot: 2700 V; Maximum Operating Temperature: 100 Cel; Length: 91 mm;
B84110A0000A010
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
B84111A0000B120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Additional Features: TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS; Width (mm): 63.5;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
B84112B0000B110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 63.5 mm; Approvals (V): UL; CSA; ENEC-10; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CUL; ENEC-10; Height: 29 mm; Maximum Leakage Current: .5 mA; Length: 63 mm;
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L63.0XB52.0XH29.0 (mm)/L2.48XB2.047XH1.142 (inch); Length: 63 mm; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10;
B84143A0008R105
THREE PHASE EMI FILTER; Rated Current: 8 A; Mounting Type: PANEL MOUNT; Additional Features: TERMINAL BLOCK CONNECTIONS; No. of Terminals: 6; Operating Frequency (Hz): 50/60Hz;
B84111A0000A030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V;
B84131-M1-G135
THREE PHASE EMI FILTER; Rated Current: 35 A; Width (mm): 104; Mounting Type: PANEL MOUNT; Approvals (V): UL; CSA; VDE; High Pot: 2700 V;
B84143A0050R105
THREE PHASE EMI FILTER; Rated Current: 50 A; High Pot: 2720 V; Approvals (V): UL; ENEC-10; No. of Terminals: 6; Height: 90 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved