Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B84112G0000G125 is a 250V single-phase EMI filter with CSA, EN, UL, and IEC approvals. It operates at -25 to 100°C temperature range and has a rated current of 25A. Ideal for panel mounting applications requiring effective EMI mains filtering.
Median Price
$57.705
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
< 1k
Farnell
1+ parts
$42.630
100+ parts
$40.840
1k+ parts
$40.830
10k+ parts
-
Mouser Electronics
$56.660
$43.270
DigiKey
$58.750
$43.280
Newark
$71.950
$62.280
Element14
$83.340
$69.720
RS (Exports)
$34.619
Nova Conductors
$47.491
Vyrian
VNN
Aztec Data Supply Inc.
$0.526
AZTECH Wire
$19.586
Ampacity Inc.
$29.430
Semicontronic
$28.694
$28.547
Corohmni
$45.647
Netroflash
$46.541
Continental Prestige Electronics
Neutron USA
$114.990
Argo Parts USA
Perfect Parts
Wide range of approvals ensures compatibility and adherence to international standards.
Suitable for various applications within the specified voltage range.
Efficiently filters out electromagnetic interference in single phase systems.
Can handle high temperatures without compromising performance.
Capable of operating in lower temperatures for versatility.
Compact design for easy installation and space efficiency.
Suitable for common frequency ranges in electrical systems.
Optimal size for a balance between performance and space requirements.
High voltage tolerance for added safety and reliability.
Low leakage current to prevent energy wastage and ensure efficiency.
Easy to install on panels for convenient integration into systems.
Standard dimensions for compatibility with various setups and enclosures.
Able to handle a significant current load for diverse applications.
Optimal height for a balance between performance and space requirements.
EMI Mains Filters B84112G0000G125 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Rectron
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0805C104K5RACTU
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
6EHQ1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .15 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Maximum Frequency: 42 dB; Maximum Leakage Current: .002 mA;
CMS1-11-R
Eaton Corporation
Eaton Corporation's CMS1-11-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.35A. Ideal for surface mount applications due to its compact L9.4xB7.2xH2.6mm size and tape and reel packing method.
30VSK6
TE Connectivity's 30VSK6 EMI Mains Filter is UL, CUL, VDE approved with a rated voltage of 250V. It features a single-phase filter type, 30A rated current, and operates at temperatures from -10 to 40°C. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
RN102-2-02-1M1
Schaffner Holding Ag
RN102-2-02-1M1 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 2A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L14.0xB14.0xH9.0 mm, it is ideal for through-hole mounting in various electronic systems.
SC-07-E030JH-P
KEMET Corporation's SC-07-E030JH-P is a UL approved EMI mains filter with 250V rated voltage and 7A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C temperatures. Ideal for applications requiring high insulation resistance and through-hole mounting in compact spaces.
SN8S-30P2
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 19 mm; Width (mm): 17; Height: 10.5 mm; Mounting Type: THROUGH HOLE MOUNT;
SS21V-R300013
KEMET Corporation's SS21V-R300013 EMI Mains Filter is UL approved with 250V rating, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and features a compact size of L20.6xB16.8xH24.5 mm for through-hole mounting in various electronic devices.
CMS2-5-R
The Eaton Corporation's CMS2-5-R is a UL-approved single-phase EMI mains filter with 4 terminals. It has a rated current of 2.3A and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L8.89xB8.89xH6.0 mm and comes in tape and reel packaging.
SHBC24W-2R1A0311V
SINGLE PHASE EMI FILTER;
3-103-709
Schurter Ag
Schurter Ag's 3-103-709 EMI Mains Filter is a single-phase filter with 240V rated voltage and 3A current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications due to its compact size of 25mm x 85mm x 89.5mm.
RSEL-2003W
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 20 mm; Mounting Type: PANEL MOUNT;
3-103-712
Schurter Ag's 3-103-712 is a SINGLE PHASE EMI FILTER with 240V rated voltage, CSA, EN, IEC, UL approvals. It operates at -40 to 100°C and has a max leakage current of 0.5mA. Ideal for PANEL MOUNT applications with 12A rated current.
6VS1
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
S8V-NFS203
Omron
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
PS0S0DH6A
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
5VR1
TE Connectivity's 5VR1 EMI Mains Filter offers UL, CSA, VDE approvals. With insertion loss ranging from 5 dB to 65 dB, it operates at 50/60Hz frequency and rated voltage of 250V. Ideal for single-phase applications with a rated current of 5A, this panel mount filter ensures efficient noise reduction in electronic systems.
PLA10AN1522R0R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1522R0R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 120 °C Max Operating Temp. It is used for EMI mains filtering applications requiring 2 A Rated Current in through-hole mounting setups.
810913020
Wuerth Elektronik & Kg
Wurth Elektronik's 810913020 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A current. It operates b/w -25°C to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
RSHN-2006D
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: DIN RAIL MOUNT; Minimum Operating Temperature: -25 Cel; Dimensions: L98.0XB52.0XH35.0 (mm)/L3.858XB2.047XH1.378 (inch); Height: 35 mm;
2-6609037-5
TE Connectivity's 2-6609037-5 EMI Mains Filter offers UL, CSA, VDE approvals. It provides 15 dB insertion loss at 0.01 MHz and 75 dB at 5 MHz. With a rated voltage of 120V, it is ideal for single-phase EMI filtering applications in panels with a max operating temperature of 40°C and high pot of 2250V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B84112B0000B120
TDK
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84112B0000B020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Width (mm): 45; Maximum Leakage Current: .5 mA;
B84134-F12-A1
THREE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50/60Hz; Length: 125 mm; Manufacturer Series: B84134-F; Height: 60 mm;
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
B84111F0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10; Height: 26 mm; Length: 43.5 mm;
B84112G0000G125
TDK-Lambda
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Approvals (V): CSA;EN:EC;UL;IEC; High Pot: 2700 V; Maximum Operating Temperature: 100 Cel; Length: 91 mm;
B84110A0000A010
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
B84111A0000B120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Additional Features: TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS; Width (mm): 63.5;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
B84112B0000B110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 63.5 mm; Approvals (V): UL; CSA; ENEC-10; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CUL; ENEC-10; Height: 29 mm; Maximum Leakage Current: .5 mA; Length: 63 mm;
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L63.0XB52.0XH29.0 (mm)/L2.48XB2.047XH1.142 (inch); Length: 63 mm; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10;
B84143A0008R105
THREE PHASE EMI FILTER; Rated Current: 8 A; Mounting Type: PANEL MOUNT; Additional Features: TERMINAL BLOCK CONNECTIONS; No. of Terminals: 6; Operating Frequency (Hz): 50/60Hz;
B84143A0025R105
THREE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; Length: 231 mm; No. of Terminals: 6; High Pot: 2720 V;
B84111A0000A030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V;
B84131-M1-G135
THREE PHASE EMI FILTER; Rated Current: 35 A; Width (mm): 104; Mounting Type: PANEL MOUNT; Approvals (V): UL; CSA; VDE; High Pot: 2700 V;
B84112G0000B112
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Minimum Operating Temperature: -25 Cel; High Pot: 2700 V; Width (mm): 52; Approvals (V): CSA;EN:EC;UL;IEC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved