Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
Median Price
$11.254
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$10.517
100+ parts
$7.357
1k+ parts
$7.180
10k+ parts
-
Mouser Electronics
$11.990
$7.100
$7.090
Vyrian
VNN
Nova Conductors
Aztec Data Supply Inc.
$3.166
Corohmni
$7.540
Ampacity Inc.
$8.840
Semicontronic
$8.619
$8.575
Continental Prestige Electronics
$11.060
Argo Parts USA
Aranea Global
Perfect Parts
Having UL, CSA, and ENEC-10 approvals ensures that this EMI mains filter meets internationally recognized safety standards, making it a reliable choice for various applications.
With a high rated voltage of 250 V, this EMI mains filter can effectively handle power fluctuations and ensure stable operation in demanding environments.
The single-phase EMI filter design helps to reduce electromagnetic interference, ensuring clean power delivery and improved performance of connected devices.
The TIN terminal finish provides excellent conductivity and corrosion resistance, making this EMI mains filter a durable and long-lasting solution for industrial applications.
The compact width of 30.0 mm allows for easy installation in tight spaces, making this EMI mains filter ideal for compact electronic devices.
With an operating frequency of 50/60Hz, this EMI mains filter is compatible with a wide range of electrical systems, offering versatility and flexibility in usage.
The length of 56 mm provides ample space for effective filtering of electromagnetic interference, ensuring optimal performance and reliability of connected equipment.
The high pot value of 2700 V indicates the excellent insulation and voltage tolerance of this EMI mains filter, enhancing safety and protection against power surges.
The low maximum leakage current of 0.5 mA ensures minimal power wastage and efficient operation, making this EMI mains filter a cost-effective and energy-efficient solution.
The through-hole mounting type offers secure and stable installation, preventing any movement or vibration of the EMI mains filter during operation for reliable performance.
The compact dimensions of this EMI mains filter allow for easy integration into various electronic systems, making it a versatile and space-saving solution for EMI suppression.
With a rated current of 1 A, this EMI mains filter can effectively handle power loads without overheating, ensuring continuous and reliable performance in challenging environments.
The height of 23 mm provides sufficient clearance for optimal airflow and heat dissipation, enhancing the efficiency and longevity of this EMI mains filter in demanding applications.
EMI Mains Filters B84110A0000A010 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
JESD-609 Code:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
PCN Design/Specification - B84110A Series 2 line EMC Filters 26/Sep/2014
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Diotec Semiconductor Ag
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Gulf Semiconductor
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
FN2010-6-06
Schaffner Holding Ag
FN2010-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.9A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.66mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
SS30V-R180190
KEMET Corporation
KEMET Corporation's SS30V-R180190 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max operating temperature of 120°C. With a rated current of 1.8A, it is designed for through-hole mounting applications where EMI filtering is required to ensure optimal performance and reliability in electronic systems.
FN406-6-02
The Schaffner Holding Ag FN406-6-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 6A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at temperatures from -25 to 100 °C and has a high pot of 2000V. Ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
FN256-64-52
The Schaffner Holding Ag FN256-64-52 is a UL, CSA, ENEC-14 approved 480V three-phase EMI mains filter with a rated current of 64A. It operates at temperatures from -25°C to 100°C and has a high pot of 2650V. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
RSEL-2003WL
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 60Hz; Width (mm): 45;
50FC10
TE Connectivity's 50FC10 EMI Mains Filter is a UL approved single-phase filter with a rated voltage of 250V and current of 50A. With a wide operating temperature range (-10 to 40°C) and high pot rating (2250V), it is ideal for panel mount applications requiring effective EMI filtering at frequencies of 50-60Hz.
SSHB10H-R04760
KEMET Corporation's SSHB10H-R04760 is a UL-approved EMI mains filter with 250V rated voltage and 0.4A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions of 17mm x 22mm x 15.5mm.
CMS1-10-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.65 A; Width (mm): 7.2; Length: 9.4 mm; Minimum Operating Temperature: -40 Cel; Packing Method: TAPE AND REEL;
B82722A2102N001
TDK
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
SN8D-300JB
KEMET Corporation's SN8D-300JB is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating temperature ranges from -25°C to 105°C, making it suitable for various applications requiring EMI mains filtering. With dimensions of 15.5mm x 18.5mm x 18mm, it is designed for through-hole mounting in electronic devices.
SCF25-08-1300
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 8 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 70 Cel; Height: 32 mm;
30VSK6
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; High Pot: 2250 V; Dimensions: L125XB101.6XH69.85 (mm)/L4.92XB4XH2.75 (inch); Manufacturer Series: SK;
SHBC20-1R7A0152V
KEMET SHBC20-1R7A0152V is a SINGLE PHASE FILTER with 12A rated current, operating from -40 to 125°C. With a diameter of 41.2mm and height of 41.2mm, it's ideal for EMI suppression in various electronic applications requiring through-hole mounting.
SCR25XV-150-1R6A010JV
KEMET's SCR25XV-150-1R6A010JV is a 15A, 1000V SINGLE PHASE EMI FILTER with 100 Mohm Insulation Resistance. Operating from -40 to 120 °C, it's ideal for EMI mains filtering applications. Dimensions: 26mm W x 35.5mm L x 33.5mm H, TRAY packing, THROUGH HOLE MOUNT type.
B82731-M2501-A30
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
600APS12L
TE Connectivity's 600APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a high pot of 2200V and max leakage current of 270mA. Ideal for panel mounting applications, this filter operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
RC212-0.4-15M
The Schaffner Holding Ag RC212-0.4-15M EMI Mains Filter has 2 functions, rated at 250V with 4 terminals. With inductance of 15000uH and max temp of 125°C, it's ideal for data line filtering applications. Measuring 7.4mm in width and mountable through hole, it operates at a rated current of 0.4A.
SCF25XV-240-2R0A006JH
SINGLE PHASE EMI FILTER;
SSHB10HS-R17046
KEMET Corporation's SSHB10HS-R17046 is a UL approved EMI mains filter with 250V rated voltage and 1.7A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for applications requiring single-phase EMI filtering in compact spaces.
CMS3-14-R
SINGLE PHASE EMI FILTER; Rated Current: .75 A; Length: 11.43 mm; Height: 6 mm; Additional Features: INDUCTANCE 1310 MICRO HENRY; Manufacturer Series: CMS;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B84112B0000B120
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84112B0000B020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Width (mm): 45; Maximum Leakage Current: .5 mA;
B84134-F12-A1
THREE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50/60Hz; Length: 125 mm; Manufacturer Series: B84134-F; Height: 60 mm;
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
B84111F0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10; Height: 26 mm; Length: 43.5 mm;
B84112G0000G125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Length: 91 mm; High Pot: 2700 V;
TDK-Lambda
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Approvals (V): CSA;EN:EC;UL;IEC; High Pot: 2700 V; Maximum Operating Temperature: 100 Cel; Length: 91 mm;
B84111A0000B120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Additional Features: TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS; Width (mm): 63.5;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
B84112B0000B110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 63.5 mm; Approvals (V): UL; CSA; ENEC-10; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CUL; ENEC-10; Height: 29 mm; Maximum Leakage Current: .5 mA; Length: 63 mm;
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L63.0XB52.0XH29.0 (mm)/L2.48XB2.047XH1.142 (inch); Length: 63 mm; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10;
B84143A0008R105
THREE PHASE EMI FILTER; Rated Current: 8 A; Mounting Type: PANEL MOUNT; Additional Features: TERMINAL BLOCK CONNECTIONS; No. of Terminals: 6; Operating Frequency (Hz): 50/60Hz;
B84143A0025R105
THREE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; Length: 231 mm; No. of Terminals: 6; High Pot: 2720 V;
B84111A0000A030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V;
B84131-M1-G135
THREE PHASE EMI FILTER; Rated Current: 35 A; Width (mm): 104; Mounting Type: PANEL MOUNT; Approvals (V): UL; CSA; VDE; High Pot: 2700 V;
B84110A0000A060
SINGLE PHASE EMI FILTER; Rated Current: 6 A; JESD-609 Code: e3; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz; High Pot: 2700 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved