Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET Corporation's SSRH7H-M20016 is a UL approved EMI mains filter with 250V rated voltage and 2A rated current. Featuring single-phase filter type, it operates b/w -25°C to 120°C temperature range. Ideal for applications requiring high insulation resistance of 100 Mohm, such as industrial electronics and power supplies.
Median Price
$1.410
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.390
100+ parts
$1.136
1k+ parts
$1.025
10k+ parts
$0.952
Mouser Electronics
$1.030
$0.893
$0.846
Farnell
$1.430
$0.720
$0.651
$0.610
Newark
$1.790
$1.540
$1.380
-
Element14
$2.260
$1.360
$1.300
$1.120
Verical
$0.892
$0.814
Nova Conductors
$0.831
Vyrian
Advanced Electronics
$0.530
$0.482
$0.435
Netroflash
Argo Parts USA
Ampacity Inc.
$1.220
Continental Prestige Electronics
$0.752
$0.653
Corohmni
$1.515
AZTECH Wire
$8.890
Authorized Procurement Solutions
High insulation resistance ensures safety and reliability in preventing electrical leakage or short circuits.
UL approval signifies that the product has been tested for safety and meets industry standards.
Suitable for use with devices and equipment that operate at standard voltage levels.
Specifically designed to filter out electromagnetic interference in single-phase systems, ensuring clean power delivery.
Can withstand high temperatures, making it suitable for applications where heat dissipation is a concern.
Can operate in cold environments without compromising performance or safety.
Compact size allows for easy installation and integration into various electronic systems.
Optimal dimensions for fitting into tight spaces or PCB layouts.
Secure packaging method ensures safe transportation and storage of the product.
Through-hole mounting provides stability and secure attachment to circuit boards or enclosures.
Suitable for devices with low to moderate power requirements, ensuring efficient current filtering.
Low profile design enables flexible installation options in various equipment or systems.
EMI Mains Filters SSRH7H-M20016 attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Approvals (V):
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1554216002
Molex
WIRE AND CABLE;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
6MV1
TE Connectivity
TE Connectivity's 6MV1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 19 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
744834407
Wuerth Elektronik & Kg
Wurth Elektronik 744834407 is a single-phase EMI filter with 4 terminals, rated for 250V and 3.5A current. Operating temperature ranges from -40°C to 125°C, suitable for applications requiring noise suppression in mains power systems at frequencies up to 50Hz. Dimensions are L32.5xB28.0xH22.0mm, ideal for through-hole mounting setups.
B84112G0000B030
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
20VR6
The TE Connectivity 20VR6 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V and rated current of 20A, it is ideal for applications requiring EMI mains filtering in electronic systems.
7448030417
Wurth Elektronik 7448030417 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering.
SCF-01-5000
KEMET Corporation
KEMET SCF-01-5000 is a single-phase EMI filter with 4 terminals, rated for 250V and 1A. Operating b/w -25°C to 60°C, it's designed for mains filtering applications at 50Hz frequency. With dimensions of L15.0xB12.0xH15.0 mm, it's ideal for through-hole mounting in various electronic devices.
30VSK6
TE Connectivity's 30VSK6 EMI Mains Filter is UL, CUL, VDE approved with a rated voltage of 250V. It features a single-phase filter type, 30A rated current, and operates at temperatures from -10 to 40°C. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
B84112B0000B120
TDK
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
FIL-1S-1-20A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Length: 99.5 mm; Width (mm): 45; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE;
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; High Pot: 2250 V; Dimensions: L125XB101.6XH69.85 (mm)/L4.92XB4XH2.75 (inch); Manufacturer Series: SK;
15VT1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 15 A; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL; Minimum Frequency: .01 MHz; Manufacturer Series: T;
FN2415L-6-29
Schaffner Holding Ag
FN2415L-6-29 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6A rated current. It operates at temperatures from -25°C to 100°C, with approvals from IEC, EN, UL, and CSA. Ideal for EMI mains filtering applications due to its high pot of 1100V and max leakage current of 2.59mA.
60AYP6C
THREE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 60 A; Manufacturer Series: A; Insertion Loss At Minimum Frequency: 5 dB; Height: 122.4 mm;
B82731-M2501-A30
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
5500.2003
Schurter Ag
The Schurter Ag 5500.2003 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It has 5 terminals, operates at -25 to 85°C temperatures, and offers high pot of 2700V. Ideal for single-phase EMI filtering applications with a rated current of 4A and dimensions of L25.0xB25.0xH25.0 mm.
B84134-F12-A1
The TDK B84134-F12-A1 is a 3-phase EMI mains filter with approvals from UL, CSA, and VDE. It has a rated voltage of 250V, rated current of 12A, and high pot of 2700V. With dimensions of L125xB65xH60 mm, it is ideal for panel mount applications requiring effective filtering at 50/60Hz frequencies.
PLA10AN3521R2R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Height: 17.5 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel;
3-103-706
Schurter Ag's 3-103-706 EMI Mains Filter is a single-phase filter with 250V rating, CSA/EN/IEC/UL approvals. It operates at -40 to 100°C, has 3A rated current, and 0.5mA max leakage current. Ideal for panel mounting applications in various industries due to its compact size (25mm W x 85mm L x 89.5mm H) and frequency range of 50/60Hz.
3EDP
TE Connectivity's 3EDP EMI Mains Filter is UL, CSA, VDE approved with 250V rating. It features single-phase filter type, 3A rated current, and max leakage current of 0.25mA. Ideal for PCB mounting applications in electronics to reduce electromagnetic interference at operating temperatures from -10°C to 40°C.
2794123
Phoenix Contact 2794123 is a UL, IEC, VDE approved EMI Mains Filter with 250V rated voltage and 1A rated current. Its single-phase filter type operates b/w -25°C to 100°C, suitable for DIN rail mounting applications. Dimensions: L79.4xB25.0xH90.3 mm (L3.126xB0.984xH3.555 inch).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSRH7HS-M03925
SSRH7HS-M03925 by KEMET Corp is a SINGLE PHASE EMI FILTER with UL approval. It has a rated voltage of 250V and insulation resistance of 100 Mohm. This filter operates in temperatures ranging from -25 to 120 °C and is suitable for through hole mounting applications.
SSRH7H-M11081
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Length: 18 mm; Minimum Insulation Resistance: 100 Mohm; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
SSRH7HS-M04467
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Packing Method: TRAY; Height: 12 mm; Approvals (V): UL; Mounting Type: THROUGH HOLE MOUNT;
SSRH7H-M10108
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Packing Method: TRAY; Minimum Operating Temperature: -25 Cel;
SSRH7HS-M07154
Mains Filters;
SSRH7HS-M17023
SSRH7HS-M15036
KEMET Corporation's SSRH7HS-M15036 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1.5A. This single-phase filter operates b/w -25°C to 120°C, making it ideal for UL-approved applications requiring effective electromagnetic interference suppression.
SSRH7H-M06237
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Rated Voltage: 250 V; Packing Method: TRAY; Height: 12 mm; Maximum Operating Temperature: 120 Cel;
SSRH7H-M07196
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT;
SSRH24NVS-40059
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Approvals (V): UL; Length: 25.5 mm; Rated Voltage: 250 V; Maximum Operating Temperature: 120 Cel;
SSRH24NH-30145
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 18 mm; Width (mm): 25.5; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT;
SSRH7H-M04596
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; Maximum Operating Temperature: 120 Cel; Rated Voltage: 250 V;
SSRH7HS-M05324
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 120 Cel; Height: 12 mm; Approvals (V): UL; Minimum Insulation Resistance: 100 Mohm;
SSRH24NH-50041
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 18 mm; Approvals (V): UL; Minimum Operating Temperature: -25 Cel; Packing Method: TRAY;
SSRH7H-M05408
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Minimum Operating Temperature: -25 Cel; Length: 18 mm; Mounting Type: THROUGH HOLE MOUNT; Height: 12 mm;
SSRH7H-M08169
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Packing Method: TRAY; Rated Voltage: 250 V; Width (mm): 14.5; Minimum Insulation Resistance: 100 Mohm;
SSRH7H-M17029
SINGLE PHASE EMI FILTER; Rated Current: 1.7 A; Packing Method: TRAY; Width (mm): 14.5; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V;
SSRH7HS-M10084
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL;
SSRH7HS-M11064
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Height: 12 mm; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Approvals (V): UL;
SSRH7H-M031157
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Height: 12 mm; Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved