Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET Corporation's SSRH24NH-50041 is a UL approved EMI mains filter with 250V rated voltage and 5A current. It offers min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of 25.5mm x 18mm. Ideal for single-phase EMI filtering applications.
Median Price
$1.935
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$1.720
Vyrian
Nova Conductors
Corohmni
$0.639
AZTECH Wire
$1.410
$1.350
$1.330
$1.300
Ampacity Inc.
$2.460
Netroflash
High insulation resistance ensures safety and reliability in electrical applications.
UL approval ensures that the product meets safety standards set by Underwriters Laboratories.
Suitable for use in applications with up to 250 volts, making it versatile for various electrical setups.
Specifically designed to filter out electromagnetic interference in single-phase systems, ensuring clean power delivery.
Can withstand high temperatures up to 120°C, suitable for demanding operating environments.
Functionality even in low temperatures down to -25°C, making it suitable for a wide range of applications.
Compact design with a width of 25.5mm allows for easy integration into various electronic devices.
Uniform dimensions with a length of 25.5mm for consistent installation and compatibility with standard setups.
Convenient tray packing method for easy storage, handling, and transportation of the product.
Through hole mounting ensures secure attachment to circuit boards for reliable performance.
With a rated current of 5A, suitable for applications requiring moderate current flow.
Compact height of 18mm for space-saving installation in electronic enclosures.
EMI Mains Filters SSRH24NH-50041 attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Approvals (V):
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
SCR25XV-170-1R7A009JV
KEMET Corporation
KEMET's SCR25XV-170-1R7A009JV is a SINGLE PHASE EMI FILTER with 1000V rated voltage, 17A current, and -40 to 120°C operating temperature range. Ideal for EMI mains filtering applications due to its high insulation resistance of 100 Mohm.
7448051804
Wuerth Elektronik & Kg
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
FN406-6-02
Schaffner Holding Ag
The Schaffner Holding Ag FN406-6-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 6A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at temperatures from -25 to 100 °C and has a high pot of 2000V. Ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
SSRH7HS-M04467
SSRH7HS-M04467 by KEMET is a UL-approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures from -25°C to 120°C, rated for 250V and 0.4A. This single-phase filter, measuring 14.5mm x 18mm x 12mm, is designed for through-hole mounting applications.
CMS1-1-R
Eaton Corporation
Eaton Corporation's CMS1-1-R EMI Mains Filter is a UL approved single-phase filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 7A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
SSRH7H-M07196
KEMET Corporation's SSRH7H-M07196 is a UL approved EMI mains filter with 100 Mohm insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 120°C and has a rated current of 0.7A. It is designed for through-hole mounting applications, measuring 14.5mm in width, 18mm in length, and 12mm in height.
6609032-9
TE Connectivity
TE Connectivity's 6609032-9 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 5A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SS26V-R100330
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 30.5 mm; Terminal Finish: NOT SPECIFIED; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Operating Frequency (Hz): 50Hz;
SC-02-10GS
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 100 Mohm; Length: 15 mm; High Pot: 500 V; Mounting Type: THROUGH HOLE MOUNT;
SS21V-R300013
KEMET Corporation's SS21V-R300013 EMI Mains Filter is UL approved with 250V rating, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and features a compact size of L20.6xB16.8xH24.5 mm for through-hole mounting in various electronic devices.
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
LF-202A
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 300 Mohm; Width (mm): 32.0; Maximum Leakage Current: 1 mA; Dimensions: L64.0XB32.0XH25.0 (mm)/L2.52XB1.26XH0.984 (inch);
30AYT6C
The TE Connectivity 30AYT6C is a UL, CSA, and VDE approved THREE PHASE EMI FILTER with insertion loss ranging from 29 dB to 60 dB. Rated for 250V and 30A, it operates at frequencies of 50/60Hz and offers high pot protection up to 1450V. Ideal for panel mounting applications in industrial settings due to its compact dimensions of L351.0xB141.5xH65.0 mm.
20VB1
TE Connectivity's 20VB1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 7 dB at min frequency and 48 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SCR22-060-1R0A075JH
KEMET's SCR22-060-1R0A075JH is a UL-approved EMI mains filter with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter. Ideal for through-hole mounting applications in various industries.
FN2020-20-08
Schaffner Holding Ag's FN2020-20-08 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates b/w -25°C to 100°C, has a max leakage current of 0.74mA, and can handle a rated current of 23A. This single-phase filter is ideal for chassis mounting applications due to its compact dimensions of L64.8xB49.8xH30.3mm.
ESP-03-222
Cosel
Cosel ESP-03-222 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, has a high pot of 2500V, and max leakage current of 0.5mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
10VSB1
The TE Connectivity 10VSB1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 3 dB at min frequency and 46 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
LF-202U-1
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Leakage Current: 1 mA; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -20 Cel; Height: 25 mm;
B84143A0025R105
TDK
TDK B84143A0025R105 is a 520V UL/ENEC-10 approved EMI mains filter with 6 terminals. It offers a rated current of 25A, high pot of 2720V, and max leakage current of 15mA. Ideal for panel mounting in applications requiring three-phase EMI filtering at 50/60Hz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSRH7HS-M03925
SSRH7HS-M03925 by KEMET Corp is a SINGLE PHASE EMI FILTER with UL approval. It has a rated voltage of 250V and insulation resistance of 100 Mohm. This filter operates in temperatures ranging from -25 to 120 °C and is suitable for through hole mounting applications.
SSRH7H-M11081
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Length: 18 mm; Minimum Insulation Resistance: 100 Mohm; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Packing Method: TRAY; Height: 12 mm; Approvals (V): UL; Mounting Type: THROUGH HOLE MOUNT;
SSRH7H-M10108
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Packing Method: TRAY; Minimum Operating Temperature: -25 Cel;
SSRH7H-M20016
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 14.5; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT;
SSRH7HS-M07154
Mains Filters;
SSRH7HS-M17023
SSRH7HS-M15036
KEMET Corporation's SSRH7HS-M15036 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1.5A. This single-phase filter operates b/w -25°C to 120°C, making it ideal for UL-approved applications requiring effective electromagnetic interference suppression.
SSRH7H-M06237
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Rated Voltage: 250 V; Packing Method: TRAY; Height: 12 mm; Maximum Operating Temperature: 120 Cel;
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT;
SSRH24NVS-40059
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Approvals (V): UL; Length: 25.5 mm; Rated Voltage: 250 V; Maximum Operating Temperature: 120 Cel;
SSRH24NH-30145
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 18 mm; Width (mm): 25.5; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT;
SSRH7H-M04596
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; Maximum Operating Temperature: 120 Cel; Rated Voltage: 250 V;
SSRH7HS-M05324
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 120 Cel; Height: 12 mm; Approvals (V): UL; Minimum Insulation Resistance: 100 Mohm;
SSRH24NH-20310
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Length: 25.5 mm; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Height: 18 mm;
SSRH24NH-35086
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; Width (mm): 25.5; Length: 25.5 mm;
SSRH24NH-40069
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Minimum Operating Temperature: -25 Cel; Length: 25.5 mm; Maximum Operating Temperature: 120 Cel; Approvals (V): UL;
SSRH24NHS-25130
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Maximum Operating Temperature: 120 Cel; Height: 18 mm; Mounting Type: THROUGH HOLE MOUNT; Packing Method: TRAY;
SSRH24NHS-30092
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Approvals (V): UL; Maximum Operating Temperature: 120 Cel; Packing Method: TRAY;
SSRH24NHS-35080
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Packing Method: TRAY; Rated Voltage: 250 V; Length: 25.5 mm; Minimum Insulation Resistance: 100 Mohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved