Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's PLA10AN3630R3D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.3A rated current. It operates b/w -25°C to 120°C, offering high insulation resistance of 100 Mohm. Ideal for EMI mains filtering applications due to its compact dimensions of L18.0xB16.0xH17.5 mm and through-hole mounting design.
Median Price
$0.607
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip Stock
Vyrian
Martec Srl
Semicontronic
$0.400
$0.390
$0.388
Continental Prestige Electronics
$0.595
Argo Parts USA
$0.589
Netroflash
Corohmni
$1.849
Aztec Data Supply Inc.
$2.710
AZTECH Wire
$17.172
Perfect Parts
High insulation resistance ensures safety and reliability in the electrical circuit.
Suitable for use with a variety of devices that operate within this voltage range.
Effective in reducing electromagnetic interference in single-phase systems, ensuring smooth operation of connected equipment.
Can withstand high temperatures, making it suitable for use in various industrial environments.
Suitable for use in cold temperature conditions without affecting performance.
Tin/copper terminal finish offers good conductivity and corrosion resistance for reliable connections.
Compact size allows for easy integration into different electronic devices and equipment.
Optimal dimensions for installation in various applications without taking up much space.
Securely packed in a box for safe handling and transportation.
Through-hole mounting ensures stable and secure installation on circuit boards or enclosures.
Compact dimensions for easy integration and versatility in various electronic setups.
Suitable for devices or systems with a low current requirement, providing efficient filtering.
Optimal height for fitting into different equipment while ensuring proper airflow and heat dissipation.
EMI Mains Filters PLA10AN3630R3D2B attributes and parameters. Explore more EMI Mains Filters devices from Murata Manufacturing
Additional Features:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Semiconductor
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
Hy Electronic
M24308/2-1F
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CMS1-11-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.35 A; Width (mm): 7.2; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel; Additional Features: INDUCTANCE 100 MICRO HENRY;
TF3435VU-300Y15R0-1H
TDK
TF3435VU-300Y15R0-1H by TDK is a 280V UL/CSA/IEC approved EMI mains filter with 15A rated current. Featuring single-phase filter type, it operates b/w -20°C to 120°C. Ideal for through-hole mounting, its compact D33XL22mm size makes it suitable for various electronic applications.
NAC-16-472-D
Cosel
The Cosel NAC-16-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI mains filter with 250V rated voltage and 16A rated current. It operates at temperatures from -40 to 85°C and features high pot of 2500V. Ideal for DIN rail mounting in applications requiring effective EMI filtering at 60Hz frequency.
6EHT3
TE Connectivity
TE Connectivity's 6EHT3 is a CSA, UL, VDE approved EMI mains filter with 250V rated voltage and 6A rated current. With single-phase filter type, it operates at -10 to 40°C temperatures and offers high pot of 2250V. Ideal for panel mounting applications due to its compact dimensions of L85.9xB54.6xH46 mm (L3.38xB2.15xH1.81 inch).
S8V-NFS203
Omron
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
RN112-0.5-02-15M
Schaffner Holding Ag
RN112-0.5-02-15M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.5A. Operating at temperatures from -40°C to 100°C, it has dimensions of L17.7xB17.1xH12.6mm and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
SCF19XV-220-1R6A004JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
SS11H-R10093-CH
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 9.3 MILLI HENRY;
FN402-1.6-02
Schaffner Holding Ag's FN402-1.6-02 EMI Mains Filter is UL, CSA, and ENEC-14 approved with 250V rated voltage. It features single-phase filter type, 5 terminals, and 1.9A rated current suitable for applications requiring effective electromagnetic interference suppression in a compact design.
CMS2-2-R
SINGLE PHASE EMI FILTER; Rated Current: 4.4 A; Width (mm): 8.89; Maximum Operating Temperature: 160 Cel; Length: 8.89 mm; Minimum Operating Temperature: -40 Cel;
B82722A2202N002
TDK B82722A2202N002 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, 50/60Hz operating frequency, and through-hole mounting. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
EAC-10-102-D
The Cosel EAC-10-102-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 10A. It operates at temperatures ranging from -40 to 85°C and has a high pot of 2500V. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
FIL-1S-1-10A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Width (mm): 45; Height: 99 mm;
LF-202A
The KEMET LF-202A EMI Mains Filter has a rated voltage of 250V and min insulation resistance of 300 Mohm. With a max operating temperature of 55°C, it is ideal for single-phase EMI filtering applications. This panel-mount filter measures L64.0xB32.0xH25.0 mm and can handle a rated current of 2A at an operating frequency of 60Hz.
20VR6
The TE Connectivity 20VR6 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V and rated current of 20A, it is ideal for applications requiring EMI mains filtering in electronic systems.
RN112-0.5-02-18M
Schaffner Holding Ag's RN112-0.5-02-18M EMI Mains Filter is UL, IEC, VDE, ENEC-10 approved with 300V rated voltage and 0.5A current. Ideal for single-phase applications with operating temp range -40 to 100°C. Through-hole mount type filter with compact dimensions of L17.7xB17.1xH12.6mm suitable for 50/60Hz frequency use.
SU9V-R01180
SU9V-R01180 by KEMET is an EMI mains filter with a rated voltage of 250V and insulation resistance of 100 Mohm. It operates b/w -25°C to 120°C, making it suitable for various applications requiring UL approval. With dimensions of 11mm x 17mm x 17mm, it is designed for through-hole mounting at a rated current of 0.1A.
3-103-675
Schurter Ag
The Schurter Ag 3-103-675 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 6A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
RSHN-2016D
The TDK RSHN-2016D EMI Mains Filter is a single-phase filter with UL, CSA, and EN approvals. It has a rated voltage of 250V and rated current of 16A. With dimensions of L127.0xB52.0xH35.0 (mm), it is ideal for DIN rail mounting applications in environments with operating temperatures ranging from -25°C to 85°C.
810912010112
Wuerth Elektronik & Kg
810912010112 by Wurth Elektronik is a SINGLE PHASE EMI FILTER with a rated voltage of 250V and rated current of 10A. It has approvals from CSA, ENEC-10, IEC, UL, VDE and operates at temperatures ranging from -25°C to 100°C. Ideal for PANEL MOUNT applications requiring effective EMI mains filtering in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PLA10AN5521R0R2B
Murata Manufacturing
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 16.0; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
PLA10AN1522R0R2B
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 300 V; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu);
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 1.5 MILLI HENRY; STANDARD WINDING TYPE;
PLA10AN2230R4D2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Additional Features: INDUCTANCE 22 MILLI HENRY; SECTIONAL WINDING TYPE; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Maximum Operating Temperature: 120 Cel; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Rated Voltage: 300 V; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm;
PLA10AN4330R3R2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e2; Rated Voltage: 300 V; Length: 18 mm; Minimum Operating Temperature: -25 Cel;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Insulation Resistance: 100 Mohm; Packing Method: BOX; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e2;
PLA10AN1030R7R2B
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu); Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Height: 17.5 mm;
PLA10AN3030R4R2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Rated Voltage: 300 V; Minimum Insulation Resistance: 100 Mohm; Height: 17.5 mm; Packing Method: BOX;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm;
PLA10AN3521R2R2B
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Additional Features: INDUCTANCE 3.5 MILLI HENRY; STANDARD WINDING TYPE; Length: 18 mm; Mounting Type: THROUGH HOLE MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Height: 17.5 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel;
PLA10AN3630R3D2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Operating Temperature: -25 Cel; Terminal Finish: Tin/Copper (Sn/Cu); Length: 18 mm; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
PLA10AN1522R0R2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Length: 18 mm; Width (mm): 16.0; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 16.0; Length: 18 mm; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
PLA10AN3630R3D2M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Width (mm): 16.0; Additional Features: INDUCTANCE 36 MILLI HENRY; SECTIONAL WINDING TYPE; Packing Method: MAGAZINE PACK; Length: 18 mm;
PLA10AN3621R0D2M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 17.5 mm; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 3.6 MILLI HENRY; SECTIONAL WINDING TYPE;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 36 MILLI HENRY; SECTIONAL WINDING TYPE; Height: 17.5 mm; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved