Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's PLA10AN3521R2R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 1.2A current. It operates b/w -25°C to 120°C, ideal for EMI mains filtering applications requiring high insulation resistance of 100 Mohm.
Median Price
$1.912
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
TME
1+ parts
100+ parts
$0.714
1k+ parts
$0.671
10k+ parts
-
Vyrian
ACDS - Activité Composants Distribution Service
Nova Conductors
AZTECH Wire
$10.739
Argo Parts USA
Perfect Parts
Aranea Global
Continental Prestige Electronics
Cyclops Electronics Ltd (Excess)
High insulation resistance ensures safety and prevents leakage currents, making this product reliable for use in electrical applications
Suitable for use with electrical systems that operate within the specified voltage range, ensuring compatibility and safety
Specifically designed for filtering electromagnetic interference in single-phase systems, providing effective noise suppression
Can withstand high operating temperatures without degradation, ensuring durability and reliability in various environments
Capable of functioning in low-temperature conditions, making it versatile for use in different environments
Tin/copper terminal finish provides good conductivity and corrosion resistance, ensuring long-term performance
Compact width allows for easy installation in limited spaces, making it suitable for applications with size constraints
Optimal length for efficient filtering of EMI interference, enhancing the performance of connected electrical devices
Secure packaging in a box ensures safe transport and storage, protecting the product from damage
Through-hole mounting provides secure attachment to circuit boards, ensuring stability and reliability in use
Compact dimensions make it easy to integrate into existing systems, offering flexibility in installation
Suitable for applications requiring a current rating of up to 1.2 A, ensuring compatibility with various electrical devices
Optimal height for effective EMI filtering while maintaining a compact form factor, ideal for space-constrained applications
EMI Mains Filters PLA10AN3521R2R2B attributes and parameters. Explore more EMI Mains Filters devices from Murata Manufacturing
Additional Features:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Bytesonic Electronics
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
B84115E0000B030
TDK
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84143A0008R105
TDK B84143A0008R105 is a 520V UL/ENEC-10 approved EMI mains filter with 6 terminals. It offers 8A rated current, 2720V high pot, and 13mA max leakage current. Ideal for three-phase EMI filtering applications due to its compact dimensions of L133.7xB51.4xH63.0mm and panel mount design.
FIL-1S-1-1A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: PANEL MOUNT; Width (mm): 27; Height: 99 mm; Rated Voltage: 230 V;
SC-02-20G
KEMET Corporation
The KEMET SC-02-20G is a UL-approved EMI mains filter with 100 Mohm min insulation resistance and 250V rated voltage. It operates b/w -25°C to 105°C, has dimensions of L17.5xB14.0xH17.5 mm, and a rated current of 2A. Ideal for single-phase EMI filtering applications requiring through-hole mounting in various electronic devices.
B84111F0000B030
TDK's B84111F0000B030 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 3A rated current. It offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications due to compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency.
250APS12P
TE Connectivity
The TE Connectivity 250APS12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 390mA. Ideal for panel mounting applications, it measures 160mm in width, 208mm in length, and stands at a height of 123mm.
B84112B0000B020
TDK's B84112B0000B020 is a 250V UL/CSA/ENEC-10 approved EMI mains filter with 2A rated current. Featuring single-phase filter type, it offers 2700V high pot and 0.5mA max leakage current. Ideal for panel mount applications, its compact dimensions of L50xB45xH28.6mm make it suitable for various electronic devices requiring effective electromagnetic interference suppression.
10ET1
The TE Connectivity 10ET1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
1000APS12P
TE Connectivity's 1000APS12P is a UL-approved EMI mains filter with a rated voltage of 690V. This three-phase filter has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting, it ensures efficient filtering in industrial applications.
RN214-0.3-02-47M
Schaffner Holding Ag
The Schaffner Holding Ag RN214-0.3-02-47M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.3A current. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L23.0xB15.5xH25.0mm for through-hole mounting in various electronic devices.
FN3288HVIT-100-35-C26-R60
Schaffner Holding Ag's FN3288HVIT-100-35-C26-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and -40 to 100°C operating temperature range. It has approvals from IEC and UL, high pot of 3530V, and max leakage current of 2.6mA. Ideal for panel mounting applications requiring effective mains filtering at 60Hz frequency.
SSHB21HS-30013
KEMET SSHB21HS-30013 EMI Mains Filter, rated 250V, 3A, with UL approval. Features include 100 Mohm min insulation resistance, -25 to 130°C operating temp range. Ideal for single-phase EMI filtering applications.
B82722-A2102-N1
TDK's B82722-A2102-N1 is a 250V rated SINGLE PHASE EMI FILTER with 1A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. Ideal for EMI mains filtering applications due to its compact size and through-hole mounting type.
10VS1
The TE Connectivity 10VS1 is a UL, CSA, VDE approved EMI mains filter with insertion loss of 15-40 dB. Rated for 250V and 10A, it operates at -10 to 40°C with dimensions of L84.8xB52.8xH38.9mm. Ideal for single-phase applications requiring effective filtering up to 2MHz frequency range.
744841330
Wuerth Elektronik & Kg
744841330 by Wurth Elektronik is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 125°C. It is approved by ENEC-10, IEC, and VDE. This filter is suitable for applications requiring noise suppression in mains power systems.
1-6609036-6
TE Connectivity's 1-6609036-6 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 40A. It operates b/w -10°C to 40°C, with max leakage current of 0.75mA. Ideal for panel mounting applications requiring effective electromagnetic interference suppression.
FIL-1S-1-3A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Height: 99 mm; Length: 99.5 mm;
RN112-0.8-02-10M
Schaffner Holding Ag's RN112-0.8-02-10M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI filter with 300V rated voltage and 0.8A current. Operating at -40 to 100 °C, it's ideal for applications requiring EMI mains filtering in a compact L17.7xB17.1xH12.6 mm through-hole mount design.
SN10-300J
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Packing Method: TRAY; Width (mm): 16; Length: 23 mm; Minimum Operating Temperature: -55 Cel;
6EQ1
The TE Connectivity 6EQ1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 26 dB at min frequency and 31 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI mains filtering in a compact panel mount design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PLA10AN5521R0R2B
Murata Manufacturing
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 16.0; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
PLA10AN1522R0R2B
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 300 V; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu);
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 1.5 MILLI HENRY; STANDARD WINDING TYPE;
PLA10AN2230R4D2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Additional Features: INDUCTANCE 22 MILLI HENRY; SECTIONAL WINDING TYPE; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Maximum Operating Temperature: 120 Cel; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Rated Voltage: 300 V; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm;
PLA10AN4330R3R2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e2; Rated Voltage: 300 V; Length: 18 mm; Minimum Operating Temperature: -25 Cel;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Insulation Resistance: 100 Mohm; Packing Method: BOX; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e2;
PLA10AN1030R7R2B
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu); Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Height: 17.5 mm;
PLA10AN3030R4R2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Rated Voltage: 300 V; Minimum Insulation Resistance: 100 Mohm; Height: 17.5 mm; Packing Method: BOX;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm;
PLA10AN3521R2R2B
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Height: 17.5 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel;
PLA10AN3630R3D2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Operating Temperature: -25 Cel; Terminal Finish: Tin/Copper (Sn/Cu); Length: 18 mm; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Width (mm): 16.0; Mounting Type: THROUGH HOLE MOUNT;
PLA10AN1522R0R2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Length: 18 mm; Width (mm): 16.0; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 16.0; Length: 18 mm; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
PLA10AN3521R2R2
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Terminal Finish: Tin/Copper (Sn/Cu); Minimum Operating Temperature: -25 Cel;
PLA10AN3521R2R2M
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Packing Method: MAGAZINE PACK; JESD-609 Code: e2; Maximum Operating Temperature: 120 Cel; Rated Voltage: 300 V;
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 3.5 MILLIHENRY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved