Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KEMET's SSR21NH-M12345 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 120°C. It is UL approved for applications requiring single-phase EMI filtering in circuits with a max current of 1.2A.
Median Price
$2.280
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
Newark
1+ parts
100+ parts
$1.660
1k+ parts
$1.460
10k+ parts
$1.400
DigiKey
$2.470
$1.744
$1.448
$1.271
Verical
-
$1.954
Nova Conductors
$1.512
TME
$2.360
$1.410
$1.370
Vyrian
Semicontronic
$0.411
$0.401
$0.399
Argo Parts USA
Continental Prestige Electronics
$1.481
Netroflash
Aztec Data Supply Inc.
$1.850
Corohmni
$2.630
AZTECH Wire
$12.048
Authorized Procurement Solutions
High insulation resistance ensures electrical safety and prevents leakage current, making this filter a reliable choice.
UL approval indicates that this product meets high safety and quality standards, making it a trustworthy choice for usage.
Suitable for use with standard voltage levels, ensuring compatibility with most electrical systems.
Specifically designed to filter out electromagnetic interference in single-phase systems, providing effective noise suppression.
With a high maximum operating temperature, this filter can withstand elevated temperatures and maintain performance under demanding conditions.
Suitable for use in wide temperature ranges and can function effectively even in cold environments.
Compact width allows for space-efficient installation and integration into various equipment and systems.
Withstands high potential voltage without breakdown, ensuring durability and reliability in high-voltage environments.
Convenient packing in trays makes handling and storage easy and organized, saving time during deployment.
Through-hole mounting provides stability and secure placement, preventing movement or dislodging during operation.
Compact dimensions make it suitable for installation in tight spaces and system designs, offering versatility in application.
Capable of handling a rated current of 1.2 A, making it suitable for lower current applications while maintaining efficiency.
Low profile design saves space and allows for flexible installation options in different setups or configurations.
EMI Mains Filters SSR21NH-M12345 attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Approvals (V):
Filter Type:
Height:
High Pot:
Minimum Insulation Resistance:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Ksl Microdevices
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
MICRODIODE ELECTRONICS SHENZHEN CO LTD
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
CMS2-5-R
Eaton Corporation
The Eaton Corporation's CMS2-5-R is a UL-approved single-phase EMI mains filter with 4 terminals. It has a rated current of 2.3A and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L8.89xB8.89xH6.0 mm and comes in tape and reel packaging.
SS20H-R10100
KEMET Corporation
KEMET Corporation's SS20H-R10100 is a SINGLE PHASE EMI FILTER with 100 Mohm Min. Insulation Resistance, 250 V Rated Voltage, and 1 A Rated Current. It operates b/w -25 to 120 °C and has High Pot of 500 V. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB22.0xH18.5 mm and Through Hole Mounting type.
1VB1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 1 A; Operating Frequency (Hz): 50/60Hz; Insertion Loss At Minimum Frequency: 15 dB; Manufacturer Series: B;
CMS3-9-R
Eaton Corporation's CMS3-9-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 1.7A. Ideal for surface mount applications due to its compact dimensions of L11.43xB11.43xH6.0mm, it features Tin/Silver/Copper terminal finish and comes in tape and reel packaging.
1000APS12P
TE Connectivity
TE Connectivity's 1000APS12P is a UL-approved EMI mains filter with a rated voltage of 690V. This three-phase filter has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting, it ensures efficient filtering in industrial applications.
10VK1
The TE Connectivity 10VK1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 6 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
B82722A2102N001
TDK
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
FN5420-1000-99-E0XXT
Schaffner Holding Ag
THREE PHASE EMI FILTER;
5VK1
TE Connectivity's 5VK1 EMI Mains Filter offers UL, CSA, VDE approvals and a rated voltage of 250V. With insertion loss ranging from 6dB to 50dB, it operates at temperatures from -10°C to 40°C. This single-phase filter is ideal for panel mounting applications with dimensions of L78.7xB71.4xH29.5mm.
FN2010-3-06
FN2010-3-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH24.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
FN670-6-06
FN670-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.19mA. Ideal for panel mounting applications due to its compact dimensions of L64.8xB49.8xH40.3mm.
B84111F0000B030
TDK's B84111F0000B030 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 3A rated current. It offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications due to compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency.
2-6609037-5
TE Connectivity's 2-6609037-5 EMI Mains Filter offers UL, CSA, VDE approvals. It provides 15 dB insertion loss at 0.01 MHz and 75 dB at 5 MHz. With a rated voltage of 120V, it is ideal for single-phase EMI filtering applications in panels with a max operating temperature of 40°C and high pot of 2250V.
SSB11V-R17043
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1.7 A; Additional Features: INDUCTANCE 4.3 MILLI HENRY; Maximum Operating Temperature: 363 Cel; Operating Frequency (Hz): 50Hz; No. of Terminals: 4;
744834407
Wuerth Elektronik & Kg
Wurth Elektronik 744834407 is a single-phase EMI filter with 4 terminals, rated for 250V and 3.5A current. Operating temperature ranges from -40°C to 125°C, suitable for applications requiring noise suppression in mains power systems at frequencies up to 50Hz. Dimensions are L32.5xB28.0xH22.0mm, ideal for through-hole mounting setups.
SC-26-S010JH
KEMET Corporation's SC-26-S010JH is a 3-phase EMI mains filter with 500V UL approval. It offers a rated current of 26A, insulation resistance of 500 Mohm, and operates b/w -25°C to 120°C. Ideal for applications requiring high-pot testing up to 100V, it has a diameter of 50mm and height of 28mm for through-hole mounting in various electronic systems.
SC-02-10GS
The KEMET SC-02-10GS EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 105°C, ideal for single-phase applications. Measuring L15.0xB8.5xH15.0 mm, it supports a max current of 2A with through-hole mounting in bulk packaging.
SCR25XV-240-2R0A006JV
KEMET's SCR25XV-240-2R0A006JV is a 1000V rated, single-phase EMI mains filter with 24A current capacity. It offers high insulation resistance of 100 Mohm and operates b/w -40°C to 120°C. Ideal for through-hole mounting applications requiring effective EMI filtering in compact spaces.
SS11VL-R06270
SS11VL-R06270 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.6A rated current. It operates b/w -25°C to 75°C, offering 100 Mohm min insulation resistance. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB14.5xH19.5 (mm).
SSHB21HS-15064
KEMET Corporation's SSHB21HS-15064 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25°C to 130°C. It is UL approved and designed for single-phase applications requiring a rated current of 1.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSR21NH-M12345
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Width (mm): 23; High Pot: 500 V;
SSR21NV-M12345
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; High Pot: 500 V; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Length: 22 mm;
SSR21NV-M12345 by KEMET Corp is a single-phase EMI filter with a rated voltage of 250V. It has a min insulation resistance of 100 Mohm and can operate at temperatures ranging from -25 to 120 °C. This filter is commonly used in applications requiring EMI mains filtering, such as industrial equipment or power supplies.
SSR21NV-M20125
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Height: 27 mm; Width (mm): 16; Minimum Insulation Resistance: 100 Mohm;
KEMET Corporation's SSR21NV-M20125 is a UL approved EMI mains filter with 250V rated voltage and 2A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L22.0xB16.0xH27.0 mm. Ideal for applications requiring single-phase EMI filtering in electronic devices.
SSR21NH-031810
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Length: 23 mm; Width (mm): 23; Rated Voltage: 250 V; Height: 14.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Insulation Resistance: 100 Mohm; Maximum Operating Temperature: 120 Cel; High Pot: 500 V; Minimum Operating Temperature: -25 Cel;
SSR21NH-M30064
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Height: 14.5 mm; Width (mm): 23; Length: 23 mm; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 23;
SSR21NV-M18164
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Height: 27 mm; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Approvals (V): UL; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16; Dimensions: L22.0XB16.0XH27.0 (mm)/L0.866XB0.63XH1.063 (inch);
SSR21NH-M041500
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Height: 14.5 mm; Approvals (V): UL; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm;
SSR21NH-M051350
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Dimensions: L23.0XB23.0XH14.5 (mm)/L0.906XB0.906XH0.571 (inch); Maximum Operating Temperature: 120 Cel;
SSR21NH-M061200
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Rated Voltage: 250 V; Length: 23 mm; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT;
SSR21NH-M08680
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Maximum Operating Temperature: 120 Cel; Packing Method: TRAY; Rated Voltage: 250 V; High Pot: 500 V;
SSR21NH-M10475
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; High Pot: 500 V; Minimum Operating Temperature: -25 Cel; Length: 23 mm;
SSR21NH-M15220
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Approvals (V): UL; High Pot: 500 V; Height: 14.5 mm; Width (mm): 23;
SSR21NH-M18164
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Height: 14.5 mm; Minimum Insulation Resistance: 100 Mohm; Width (mm): 23; Minimum Operating Temperature: -25 Cel;
SSR21NH-M25103
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; High Pot: 500 V; Rated Voltage: 250 V; Approvals (V): UL; Packing Method: TRAY;
SSR21NH-M031900
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Insulation Resistance: 100 Mohm; Length: 23 mm; Packing Method: TRAY; Width (mm): 23;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved