Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Operating Temperature: -25 Cel; Terminal Finish: Tin/Copper (Sn/Cu); Length: 18 mm; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
Median Price
$0.607
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip Stock
Vyrian
Martec Srl
Semicontronic
$0.400
$0.390
$0.388
Continental Prestige Electronics
$0.595
Argo Parts USA
$0.589
Netroflash
Corohmni
$1.849
Aztec Data Supply Inc.
$2.710
AZTECH Wire
$17.172
Perfect Parts
EMI Mains Filters PLA10AN3630R3D2B attributes and parameters. Explore more EMI Mains Filters devices from Tokyo Parts Industrial
Additional Features:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
About Tokyo Parts Industrial Technical capabilities We have been serving for half a century as a manufacture dedicated to making electric and electronic parts. We keep manufacturing high-quality products that are always on the cutting edge. That’s why we have been able to apply for more then 800 patents and utility models that case out of unique expertise at electrical parts development. Adaptability We started using a CAD/DAM system before anyone in the competition. We have been confronted with requests for many types of parts and challenged to meet very difficult requirements. We have become recognized for our adaptability, and our reputation is : “If you are really looking for skilled development, you should goto Tokyo Parts.” That’s where companies can find us., in our well-equipped design facilities, ready to apply our flexible development concepts to new and challenging subjects. Quality management Our quality warranty system includes QFD (Quality Function Development) for our development and design system and our in-process quality control system, and a reliability verification system. All aspects of all these safeguards apply throughout all processes. This system assures that we will be providing reliable precision parts. Keeping an eye on costs We always bear in mind the value of reducing costs. We do effective work in well-equipped facilities and try to turn out good performance at low cost with improved production technologies. Above all, our aim is hit both targets at once: low cost and high performance.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Synsemi
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
International Semiconductor
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
M85049/85-08W02
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
Micro Commercial Components
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
10ET1
TE Connectivity
The TE Connectivity 10ET1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SU7VC-05011
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 1.1 MILLI HENRY; Maximum Operating Temperature: 348 Cel;
B84143A0025R105
TDK
TDK B84143A0025R105 is a 520V UL/ENEC-10 approved EMI mains filter with 6 terminals. It offers a rated current of 25A, high pot of 2720V, and max leakage current of 15mA. Ideal for panel mounting in applications requiring three-phase EMI filtering at 50/60Hz frequency.
744841330
Wuerth Elektronik & Kg
744841330 by Wurth Elektronik is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 125°C. It is approved by ENEC-10, IEC, and VDE. This filter is suitable for applications requiring noise suppression in mains power systems.
B84111A0000B120
TDK's B84111A0000B120 EMI Mains Filter, rated at 250V and 20A, features UL, CSA, and ENEC-10 approvals. With a single-phase filter type and dimensions of L50.8xB63.5xH38.1 (mm), it is ideal for panel mount applications requiring high pot up to 2700V and low leakage current of 0.5mA at an operating frequency of 50/60Hz.
10EK3
The TE Connectivity 10EK3 is a UL, CSA, VDE approved EMI mains filter with insertion loss of 8-45 dB. Rated for 250V and 10A, it operates at frequencies from 0.15-30 MHz. Ideal for single-phase applications, this panel-mount filter has dimensions of L71.4xB52.6xH29.5 mm and withstands temperatures from -10 to 40°C.
FIL-1S-1-6A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 45; Height: 99 mm; Length: 99.5 mm; Rated Voltage: 230 V;
7448051012
Wurth Elektronik 7448051012 is a single-phase EMI filter with 250V rated voltage and 10A current. It has approvals from ENEC-10 and VDE, operating temperature range of -40 to 125°C, and dimensions of 23mm width, 34mm length, and 33mm height. Ideal for applications requiring EMI mains filtering in electronics.
RN102-0.3-02-12M
Schaffner Holding Ag
RN102-0.3-02-12M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.3A current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L14.0xB14.0xH9.0 mm for through-hole mounting in various electronic devices.
B82722A2302N001
TDK's B82722A2302N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 3A rated current. It features single-phase filtering, TIN over nickel terminals, and operates at 50/60Hz. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression.
6VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
1VB1
1VB1 by TE Connectivity is a SINGLE PHASE EMI FILTER with UL, CSA, VDE approvals. It offers 15 dB insertion loss at 0.15 MHz and 50 dB at 30 MHz. Ideal for applications requiring EMI mains filtering in a compact panel mount design.
1-6609028-9
TE Connectivity 1-6609028-9 is a UL, CSA, VDE approved EMI mains filter with 6dB insertion loss at 0.15MHz and 50dB at 30MHz. It operates at 50/60Hz frequency, rated for 250V and 20A current. Ideal for panel mount applications in electronics to reduce electromagnetic interference.
25FCD10
THREE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 25 A; Insertion Loss At Minimum Frequency: 13 dB; Additional Features: DIN TERMINAL; Height: 64 mm;
CMS3-14-R
Eaton Corporation
Eaton Corporation's CMS3-14-R is a UL-approved EMI mains filter with 4 terminals. It features single-phase filtering, rated current of 0.75A, and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L11.43xB11.43xH6.0mm and uses Tin/Silver/Copper terminal finish.
FN670-6-06
FN670-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.19mA. Ideal for panel mounting applications due to its compact dimensions of L64.8xB49.8xH40.3mm.
6EQ1
The TE Connectivity 6EQ1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 26 dB at min frequency and 31 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI mains filtering in a compact panel mount design.
SS11H-R10093-CH
KEMET Corporation
KEMET's SS11H-R10093-CH EMI Mains Filter offers 100 Mohm Min Insulation Resistance, 250V Rated Voltage, and 120°C Max Operating Temp. Ideal for single-phase EMI filtering applications with Through Hole Mounting, it ensures reliable performance in a compact L21.0xB20.5xH16.0 mm package.
SSR21NH-M12345
KEMET's SSR21NH-M12345 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 120°C. It is UL approved for applications requiring single-phase EMI filtering in circuits with a max current of 1.2A.
FN3025HL-20-71
Schaffner Holding Ag's FN3025HL-20-71 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 520V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 0.4mA, and a rated current of 20A. This three-phase filter is mounted on DIN rail for applications requiring effective EMI filtering in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PLA10AN5521R0R2B
Murata Manufacturing
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 16.0; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
PLA10AN1522R0R2B
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 300 V; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu);
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 1.5 MILLI HENRY; STANDARD WINDING TYPE;
PLA10AN2230R4D2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Additional Features: INDUCTANCE 22 MILLI HENRY; SECTIONAL WINDING TYPE; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Maximum Operating Temperature: 120 Cel; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Rated Voltage: 300 V; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm;
PLA10AN4330R3R2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e2; Rated Voltage: 300 V; Length: 18 mm; Minimum Operating Temperature: -25 Cel;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Insulation Resistance: 100 Mohm; Packing Method: BOX; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e2;
PLA10AN1030R7R2B
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu); Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Height: 17.5 mm;
PLA10AN3030R4R2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Rated Voltage: 300 V; Minimum Insulation Resistance: 100 Mohm; Height: 17.5 mm; Packing Method: BOX;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm;
PLA10AN3521R2R2B
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Additional Features: INDUCTANCE 3.5 MILLI HENRY; STANDARD WINDING TYPE; Length: 18 mm; Mounting Type: THROUGH HOLE MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Height: 17.5 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel;
PLA10AN3630R3D2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Width (mm): 16.0; Mounting Type: THROUGH HOLE MOUNT;
PLA10AN1522R0R2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Length: 18 mm; Width (mm): 16.0; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 16.0; Length: 18 mm; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
PLA10AN3621R0D2M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 16.0; Height: 17.5 mm; Maximum Operating Temperature: 120 Cel; Terminal Finish: Tin/Copper (Sn/Cu);
PLA10AN3630R3D2M
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Width (mm): 16.0; Additional Features: INDUCTANCE 36 MILLI HENRY; SECTIONAL WINDING TYPE; Packing Method: MAGAZINE PACK; Length: 18 mm;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 36 MILLI HENRY; SECTIONAL WINDING TYPE; Height: 17.5 mm; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved