Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's PLA10AN2230R4D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage, 0.4A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C, ideal for EMI mains filtering applications requiring through-hole mounting in compact spaces.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
ACDS - Activité Composants Distribution Service
Nova Conductors
Martec Srl
ComSIT Distribution GmbH
Rebound Electronics
Aztec Data Supply Inc.
$0.630
Semicontronic
$1.400
$1.365
$1.358
Corohmni
$3.248
AZTECH Wire
$15.294
ChipstoGo Electronic ltd
Perfect Parts
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
High insulation resistance ensures safety and prevents leakage currents, making this product reliable for use.
Suitable for a wide range of applications that require filtering at voltage levels up to 300V.
Specifically designed for single-phase applications, providing effective electromagnetic interference filtering.
Can withstand high temperatures, making it suitable for applications that operate in elevated temperature environments.
Capable of functioning in low temperature conditions, making it versatile for different environmental settings.
Tin/Copper finish on terminals ensures good conductivity and corrosion resistance, enhancing the product's longevity.
Compact width allows for easy integration into various electronic systems without taking up much space.
Optimal length for effective filtration while maintaining a compact form factor.
Box packing ensures safe transportation and storage of the product, preventing damage during handling.
Through-hole mounting simplifies installation and provides secure mechanical support for the filter.
Compact dimensions make it versatile for different setups while ensuring efficient filtration performance.
Suitable for applications with a current draw of up to 0.4 amperes, providing effective filtering for various devices.
Moderate height for accommodating the components within compact spaces while maintaining effective filtration capability.
EMI Mains Filters PLA10AN2230R4D2B attributes and parameters. Explore more EMI Mains Filters devices from Murata Manufacturing
Additional Features:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Vishay Telefunken
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Microsemi
Rectron
6VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
10EK3
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; Height: 29.5 mm; Manufacturer Series: K; Dimensions: L71.4XB52.6XH29.5 (mm)/L2.81XB2.07XH1.16 (inch);
SU9V-R05034
KEMET Corporation
SU9V-R05034 by KEMET Corp is an EMI mains filter with UL approval and 250V rated voltage. It offers a min insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a rated current of 0.5A. Ideal for applications requiring effective filtering in electronic devices.
B82731-M2501-A30
TDK
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
3-103-712
Schurter Ag
Schurter Ag's 3-103-712 is a SINGLE PHASE EMI FILTER with 240V rated voltage, CSA, EN, IEC, UL approvals. It operates at -40 to 100°C and has a max leakage current of 0.5mA. Ideal for PANEL MOUNT applications with 12A rated current.
16BCF10
TE Connectivity
TE Connectivity's 16BCF10 EMI Mains Filter is a THREE PHASE filter with UL and VDE approvals, rated for 277V and 16A. With a max operating temperature of 50°C and min of -10°C, it is ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
FN2415-6-29
Schaffner Holding Ag
Schaffner Holding Ag's FN2415-6-29 is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6A current. Operating at -25 to 100°C, it offers high pot of 1100V and max leakage current of 9.4mA. Ideal for panel mounting applications with dimensions L94.0xB56.0xH45.4mm, this filter operates at 60Hz frequency for effective EMI suppression.
SU7VC-05011
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 1.1 MILLI HENRY; Maximum Operating Temperature: 348 Cel;
7448012501
Wuerth Elektronik & Kg
Wurth Elektronik 7448012501 is a single-phase EMI filter with 250V rated voltage and 2.5A current. With approvals from ENEC-10 and VDE, it operates b/w -40°C to 125°C making it ideal for applications requiring noise suppression in mains power circuits.
10ET1
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 10 A; Height: 45.7 mm; Approvals (V): UL; CSA; VDE; Manufacturer Series: T;
SS11V-R10093-CH
KEMET's SS11V-R10093-CH EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 120°C. With a high pot of 500V, it is ideal for single-phase EMI filtering applications. This through-hole mount filter measures L22.0xB14.5xH21.5mm and can handle a rated current of 1A efficiently.
SC-35-D010JH
KEMET SC-35-D010JH EMI Mains Filter rated at 250V, 35A with UL approval. Features single-phase filter type, -25 to 120°C operating temp range. Ideal for noise suppression in electronic equipment.
744844471
Wurth Elektronik 744844471 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 9A rated current. Operating temp from -40°C to 125°C, it's ideal for EMI mains filtering applications. Compact at 18.5mm width, 28mm length, and 33mm height, suitable for through-hole mounting in systems with a frequency of 50Hz.
B82722-A2302-N1
TDK's B82722-A2302-N1 is a 250V rated SINGLE PHASE EMI FILTER with 3A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. This through-hole mount filter, measuring 22.7mm x 22.3mm x 13.3mm (LxWxH), is ideal for EMI mains filtering applications.
SU16VD-30030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 27.5 mm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; No. of Terminals: 4;
RN212-0.5-02
RN212-0.5-02 by Schaffner Holding Ag is a UL and VDE approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -40°C to 125°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of 12.5mm x 18mm x 20mm, it has a rated current of 0.5A and mounts through holes efficiently.
SCR25B-105-1R3A035JH
KEMET Corporation's SCR25B-105-1R3A035JH is a UL approved EMI mains filter with 500V rated voltage and 10.5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter suitable for through-hole mounting applications.
FN2080-10-06
FN2080-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 11.5A rated current. It has approvals from UL, CSA, and ENEC-14 for applications requiring EMI mains filtering. With dimensions of L130.5XB56.0XH45.4 (mm), it is suitable for chassis mount installations in various electronic equipment to ensure efficient electromagnetic interference suppression.
20VR1
The TE Connectivity 20VR1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V and rated current of 20A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
SCR25XV-220-1R9A007JH
KEMET Corporation's SCR25XV-220-1R9A007JH is a 1000V rated SINGLE PHASE EMI filter with 22A current. Operating temperature ranges from -40°C to 120°C. It is used in EMI mains filtering applications due to its compact size and through-hole mounting design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PLA10AN5521R0R2B
Murata Manufacturing
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 16.0; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
PLA10AN1522R0R2B
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 300 V; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu);
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 1.5 MILLI HENRY; STANDARD WINDING TYPE;
PLA10AN2230R4D2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Additional Features: INDUCTANCE 22 MILLI HENRY; SECTIONAL WINDING TYPE; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Maximum Operating Temperature: 120 Cel; Height: 17.5 mm;
PLA10AN4330R3R2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e2; Rated Voltage: 300 V; Length: 18 mm; Minimum Operating Temperature: -25 Cel;
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Insulation Resistance: 100 Mohm; Packing Method: BOX; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e2;
PLA10AN1030R7R2B
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: Tin/Copper (Sn/Cu); Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Height: 17.5 mm;
PLA10AN3030R4R2B
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Rated Voltage: 300 V; Minimum Insulation Resistance: 100 Mohm; Height: 17.5 mm; Packing Method: BOX;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Terminal Finish: Tin/Copper (Sn/Cu); Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm;
PLA10AN3521R2R2B
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Additional Features: INDUCTANCE 3.5 MILLI HENRY; STANDARD WINDING TYPE; Length: 18 mm; Mounting Type: THROUGH HOLE MOUNT;
SINGLE PHASE EMI FILTER; Rated Current: 1.2 A; Rated Voltage: 300 V; Height: 17.5 mm; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 120 Cel;
PLA10AN3630R3D2B
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Minimum Operating Temperature: -25 Cel; Terminal Finish: Tin/Copper (Sn/Cu); Length: 18 mm; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch);
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Packing Method: BOX; Minimum Insulation Resistance: 100 Mohm; Width (mm): 16.0; Mounting Type: THROUGH HOLE MOUNT;
PLA10AN1522R0R2
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Dimensions: L18.0XB16.0XH17.5 (mm)/L0.709XB0.63XH0.689 (inch); Length: 18 mm; Width (mm): 16.0; Height: 17.5 mm;
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 16.0; Length: 18 mm; Rated Voltage: 300 V; Mounting Type: THROUGH HOLE MOUNT;
PLA10AN2230R4D2M
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Height: 17.5 mm; JESD-609 Code: e2; Mounting Type: THROUGH HOLE MOUNT; Minimum Insulation Resistance: 100 Mohm;
PLA10AN2221R5R2M
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Rated Voltage: 300 V; Length: 18 mm; Packing Method: MAGAZINE PACK; Maximum Operating Temperature: 120 Cel;
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Width (mm): 16.0; Mounting Type: THROUGH HOLE MOUNT; Height: 17.5 mm; Terminal Finish: Tin/Copper (Sn/Cu);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved