Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Mains Filters;
Median Price
$0.978
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Newark
1+ parts
$0.261
100+ parts
1k+ parts
10k+ parts
Arrow
$0.646
-
Master Electronics
$0.966
$0.839
Chip1Stop
$1.117
$0.859
DigiKey
$1.390
$1.136
$1.025
$0.952
Distrelec
Verical
$0.990
Nova Conductors
$0.878
Vyrian
IBS Electronics
$0.954
$0.912
Ampacity Inc.
$0.222
Continental Prestige Electronics
$0.860
Argo Parts USA
Modulus Dynamics
$1.565
Corohmni
$2.249
Aztec Data Supply Inc.
$2.382
Authorized Procurement Solutions
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Crimson Semiconductor
ROHM
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
RSEL-2005M
TDK
RSEL-2005M by TDK is a 250V single-phase EMI filter with approvals from UL, CSA, EN, and SEMKO. It has a rated current of 5A and max operating temperature of 85°C. Ideal for chassis mount applications requiring effective filtering at 60Hz frequency.
SS11VL-R06270
SS11VL-R06270 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.6A rated current. It operates b/w -25°C to 75°C, offering 100 Mohm min insulation resistance. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB14.5xH19.5 (mm).
TF0804S-01
TDK TF0804S-01 is a 1A, 50V single-phase EMI mains filter with -20 to 105°C operating range. Its compact D10.0xH6.0mm size makes it ideal for through-hole mounting applications in various electronic devices requiring effective EMI filtering.
FN2412-32-33
Schaffner Holding Ag
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
3EDP
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Dimensions: L36.6XB31.5XH24.15 (mm)/L1.44XB1.24XH0.95 (inch); Minimum Frequency: .15 MHz;
744834433
Wuerth Elektronik & Kg
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
SS26V-R100330
KEMET Corporation's SS26V-R100330 EMI Mains Filter is UL approved with 250V rated voltage and 1A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L26.0xB20.5xH30.5 mm. Ideal for single-phase EMI filtering applications in various electronic devices.
SSB11H-R13090
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 343 Cel; Rated Voltage: 250 V;
CMS3-1-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; Packing Method: TAPE AND REEL; Approvals (V): UL; Dimensions: L11.43XB11.43XH6 (mm); Minimum Operating Temperature: -40 Cel;
FN2010B-16-06
Schaffner Holding Ag's FN2010B-16-06 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.002mA, and can handle a high pot of 2500V. This single-phase filter is panel mountable and ideal for applications requiring effective electromagnetic interference suppression.
20SRB1-Y
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
30VSK6
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; High Pot: 2250 V; Dimensions: L125XB101.6XH69.85 (mm)/L4.92XB4XH2.75 (inch); Manufacturer Series: SK;
SSHB10H-R04760
KEMET Corporation's SSHB10H-R04760 is a UL-approved EMI mains filter with 250V rated voltage and 0.4A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 120°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions of 17mm x 22mm x 15.5mm.
SSR21NV-M20125
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Height: 27 mm; Width (mm): 16; Minimum Insulation Resistance: 100 Mohm;
SSRH7HS-M15036
KEMET Corporation's SSRH7HS-M15036 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1.5A. This single-phase filter operates b/w -25°C to 120°C, making it ideal for UL-approved applications requiring effective electromagnetic interference suppression.
B84111A0000A030
TDK's B84111A0000A030 is a 250V UL/CSA/ENEC-10 approved single-phase EMI mains filter with 3A rated current. With dimensions of L50xB45xH22.3 mm, it offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications at 50/60Hz operating frequency.
CMS1-14-R
SINGLE PHASE EMI FILTER; Rated Current: .85 A; Additional Features: INDUCTANCE 205 MICRO HENRY; Approvals (V): UL; Height: 2.6 mm; Maximum Operating Temperature: 160 Cel;
8-1609148-2
TE Connectivity's 8-1609148-2 EMI Mains Filter is a THREE PHASE filter with 520V rated voltage and 250A rated current. It operates b/w -10°C to 50°C, with max leakage current of 222mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
FN351H-50-33
Schaffner Holding Ag's FN351H-50-33 is a 3-phase EMI filter with approvals from CSA and ENEC-14. It has a rated voltage of 520V, rated current of 57.7A, and operates at temperatures ranging from -25°C to 100°C. This panel mount filter is designed for applications requiring effective electromagnetic interference suppression in industrial settings.
RSHN-2006D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: DIN RAIL MOUNT; Minimum Operating Temperature: -25 Cel; Dimensions: L98.0XB52.0XH35.0 (mm)/L3.858XB2.047XH1.378 (inch); Height: 35 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSRH7HS-M03925
SSRH7HS-M03925 by KEMET Corp is a SINGLE PHASE EMI FILTER with UL approval. It has a rated voltage of 250V and insulation resistance of 100 Mohm. This filter operates in temperatures ranging from -25 to 120 °C and is suitable for through hole mounting applications.
SSRH7H-M11081
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Length: 18 mm; Minimum Insulation Resistance: 100 Mohm; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
SSRH7HS-M04467
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Packing Method: TRAY; Height: 12 mm; Approvals (V): UL; Mounting Type: THROUGH HOLE MOUNT;
SSRH7H-M10108
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Packing Method: TRAY; Minimum Operating Temperature: -25 Cel;
SSRH7H-M20016
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Width (mm): 14.5; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT;
SSRH7HS-M17023
SSRH7H-M06237
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Rated Voltage: 250 V; Packing Method: TRAY; Height: 12 mm; Maximum Operating Temperature: 120 Cel;
SSRH7H-M07196
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT;
SSRH24NVS-40059
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Approvals (V): UL; Length: 25.5 mm; Rated Voltage: 250 V; Maximum Operating Temperature: 120 Cel;
SSRH24NH-30145
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: 18 mm; Width (mm): 25.5; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT;
SSRH7H-M04596
SINGLE PHASE EMI FILTER; Rated Current: .4 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; Maximum Operating Temperature: 120 Cel; Rated Voltage: 250 V;
SSRH7HS-M05324
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Maximum Operating Temperature: 120 Cel; Height: 12 mm; Approvals (V): UL; Minimum Insulation Resistance: 100 Mohm;
SSRH24NH-50041
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 18 mm; Approvals (V): UL; Minimum Operating Temperature: -25 Cel; Packing Method: TRAY;
SSRH7HS-M06185
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Packing Method: TRAY; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Width (mm): 14.5;
SSRH7HS-M08134
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Rated Voltage: 250 V; Approvals (V): UL; Length: 18 mm; Maximum Operating Temperature: 120 Cel;
SSRH7HS-M10084
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL;
SSRH7HS-M11064
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; Height: 12 mm; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Approvals (V): UL;
SSRH7HS-M13046
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Maximum Operating Temperature: 120 Cel; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -25 Cel; Height: 12 mm;
SSRH7HS-M20013
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved