Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Approvals (V): CSA;EN:EC;UL;IEC; High Pot: 2700 V; Maximum Operating Temperature: 100 Cel; Length: 91 mm;
Median Price
$77.160
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
< 1k
Farnell
1+ parts
$42.630
100+ parts
$40.840
1k+ parts
$40.830
10k+ parts
-
Mouser Electronics
$76.220
Newark
$78.100
$69.410
$67.930
Element14
$83.340
$69.720
DigiKey
$85.680
$59.340
$58.649
RS (Exports)
$34.619
Nova Conductors
$47.491
Vyrian
VNN
Aztec Data Supply Inc.
$0.526
AZTECH Wire
$19.586
Ampacity Inc.
$29.430
Semicontronic
$28.694
$28.547
Corohmni
$45.647
Netroflash
$46.541
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
EMI Mains Filters B84112G0000G125 attributes and parameters. Explore more EMI Mains Filters devices from TDK-Lambda
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
TDK-Lambda was created in 2008 through a merger with the power supply business of TDK. The company is now a leader in the power supply field. With R&D bases located in five key areas, namely Japan, China, the rest of Asia, Europe, and America, and a comprehensive framework extending from development and manufacture to marketing and service, we can swiftly meet any customer requirements and needs. The highly efficient and utterly reliable power supplies from TDK-Lambda reflect the advanced materials technology, process technology, evaluation & simulation technology, circuit design technology and other core technologies of the TDK Group. Our products play a vital role in many sectors of the industry, including telecommunications, data communications, medical facilities, testing and measurement, rail transport, automotive applications, and LED devices. In the market for industrial equipment power supplies where reliability is especially important, TDK-Lambda is the top player worldwide.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Crimson Semiconductor
Frontier Electronics
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Fairchild Semiconductor
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diotec Semiconductor Ag
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
RSHN-2006L
TDK
The TDK RSHN-2006L is a single-phase EMI filter with a rated voltage of 250V and a rated current of 6A. It offers approvals from UL, CSA, and EN, making it suitable for various applications requiring EMI mains filtering. With dimensions of 52mm x 98mm x 43.4mm (W x L x H) and operating temperatures ranging from -25°C to 85°C, this panel-mount filter ensures reliable performance in diverse environments.
7448680120
Wuerth Elektronik & Kg
Wurth Elektronik 7448680120 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 115°C, suitable for IEC approvals. Ideal for EMI mains filtering applications due to its compact size (27.5mm x 25mm x 10mm) and through-hole mounting design.
SC-02-10GS
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 100 Mohm; Length: 15 mm; High Pot: 500 V; Mounting Type: THROUGH HOLE MOUNT;
RN112-0.5-02-15M
Schaffner Holding Ag
RN112-0.5-02-15M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.5A. Operating at temperatures from -40°C to 100°C, it has dimensions of L17.7xB17.1xH12.6mm and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
FN2412-32-33
Schaffner Holding Ag's FN2412-32-33 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 3.4mA, and a rated current of 32A. This single-phase filter is mounted on DIN rail and suitable for applications requiring effective electromagnetic interference suppression.
6609047-3
TE Connectivity
TE Connectivity's 6609047-3 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max current of 15A. It operates b/w -10°C to 40°C, with a max leakage current of 1.2mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
FN3258-30-33
The Schaffner Holding Ag FN3258-30-33 is a 480V UL/CSA/ENEC-14 approved EMI mains filter with a rated current of 30A. It operates at temperatures from -25°C to 100°C and has a max leakage current of 33mA. This three-phase filter, measuring L240.0xB50.0xH85.0 mm, is ideal for panel mounting applications in industrial settings.
2-1609037-9
TE Connectivity's 2-1609037-9 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. Ideal for EMI mains filtering applications, it operates b/w -10°C to 40°C at 50Hz frequency and mounts on panels.
SU9V-02080
SU9V-02080 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage. It offers 100 Mohm min insulation resistance, 0.2A rated current, and operates b/w -25°C to 120°C. Ideal for single-phase EMI filtering applications due to its compact dimensions of L17.0xB11.0xH17.0 mm.
FN3256H-120-35-R69
Schaffner's FN3256H-120-35-R69 is a 3-phase EMI filter with 480V rated voltage, 120A current, and -25 to 100°C operating temperature range. Approved by EN, IEC, CSA, UL for applications requiring high-potential of 1300V and max leakage current of 0.9mA. Ideal for panel mounting in industrial settings with a frequency of 60Hz.
SCF19XV-150-1R3A006JH
SINGLE PHASE EMI FILTER;
SSRH7H-M06237
SSRH7H-M06237 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage and 0.6A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C. Ideal for applications requiring high insulation resistance of 100 Mohm, such as industrial electronics and power supplies.
SC-01-06G
KEMET SC-01-06G is a UL-approved EMI mains filter with 250V rated voltage and 1A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 105°C, and has dimensions of L17.5xB14.0xH17.5 mm. Ideal for single-phase EMI filtering applications requiring through-hole mounting in various electronic devices.
3-128-417
Schurter Ag
The Schurter Ag 3-128-417 is a THREE PHASE EMI FILTER with a rated voltage of 520V and max operating temperature of 100°C. With approvals from IEC, UL, and VDE, it has a high pot of 2750V and rated current of 110A. Ideal for panel mount applications in industries requiring efficient EMI mains filtering.
FN3258-42-33
Schaffner Holding Ag's FN3258-42-33 EMI Mains Filter is a UL, CSA, and ENEC-14 approved three-phase filter with 480V rated voltage and 42A current. With a compact size of L280.0xB50.0xH85.0 mm, it operates b/w -25°C to 100°C making it ideal for panel mounting applications requiring high pot of 2650V and max leakage current of 33mA at 60Hz frequency.
SHBC20-1R7A0152V
KEMET SHBC20-1R7A0152V is a SINGLE PHASE FILTER with 12A rated current, operating from -40 to 125°C. With a diameter of 41.2mm and height of 41.2mm, it's ideal for EMI suppression in various electronic applications requiring through-hole mounting.
SS11H-R10093-CH
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Additional Features: INDUCTANCE 9.3 MILLI HENRY;
SSHB21HS-18046
KEMET Corporation's SSHB21HS-18046 is a UL approved EMI mains filter with 250V rated voltage and 1.8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and has a compact size of 23mm x 26mm x 15.5mm. Ideal for applications requiring single-phase EMI filtering in various electronic devices.
6609069-6
TE Connectivity's 6609069-6 is a SINGLE PHASE EMI FILTER with 250V, 50A rating. Operating from -10°C to 40°C, it has max leakage current of 7mA. Ideal for PANEL MOUNT applications in EMI mains filtering.
CMS3-14-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: .75 A; Length: 11.43 mm; Height: 6 mm; Additional Features: INDUCTANCE 1310 MICRO HENRY; Manufacturer Series: CMS;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B84112B0000B120
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
B84115E0000B030
The TDK B84115E0000B030 is a UL, CSA, and ENEC-10 approved SINGLE PHASE EMI filter with a rated voltage of 250V. It has a width of 50.8mm and operates at a frequency of 50/60Hz. This panel mount filter is commonly used for EMI suppression in electrical systems.
B84112B0000B020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Width (mm): 45; Maximum Leakage Current: .5 mA;
B84134-F12-A1
THREE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50/60Hz; Length: 125 mm; Manufacturer Series: B84134-F; Height: 60 mm;
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
B84111F0000B030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10; Height: 26 mm; Length: 43.5 mm;
B84112G0000G125
SINGLE PHASE EMI FILTER; Rated Current: 25 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Length: 91 mm; High Pot: 2700 V;
B84110A0000A010
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
B84111A0000B120
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Additional Features: TAB CONNECTORS ON FACE ENDS, MOUNTING TABS ON FACE ENDS; Width (mm): 63.5;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
B84112B0000B110
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 63.5 mm; Approvals (V): UL; CSA; ENEC-10; Maximum Leakage Current: .5 mA; Operating Frequency (Hz): 50/60Hz;
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
TDK-Lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CUL; ENEC-10; Height: 29 mm; Maximum Leakage Current: .5 mA; Length: 63 mm;
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L63.0XB52.0XH29.0 (mm)/L2.48XB2.047XH1.142 (inch); Length: 63 mm; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CUL; ENEC-10;
B84143A0008R105
THREE PHASE EMI FILTER; Rated Current: 8 A; Mounting Type: PANEL MOUNT; Additional Features: TERMINAL BLOCK CONNECTIONS; No. of Terminals: 6; Operating Frequency (Hz): 50/60Hz;
B84143A0025R105
THREE PHASE EMI FILTER; Rated Current: 25 A; Mounting Type: PANEL MOUNT; Length: 231 mm; No. of Terminals: 6; High Pot: 2720 V;
B84111A0000A030
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Additional Features: TAB CONNECTORS ON FACE ENDS, LATERAL MOUNTING TABS; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .5 mA; Rated Voltage: 250 V;
B84131-M1-G135
THREE PHASE EMI FILTER; Rated Current: 35 A; Width (mm): 104; Mounting Type: PANEL MOUNT; Approvals (V): UL; CSA; VDE; High Pot: 2700 V;
B84112G0000B112
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Minimum Operating Temperature: -25 Cel; High Pot: 2700 V; Width (mm): 52; Approvals (V): CSA;EN:EC;UL;IEC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved