Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 30VSK6 EMI Mains Filter is UL, CUL, VDE approved with a rated voltage of 250V. It features a single-phase filter type, 30A rated current, and operates at temperatures from -10 to 40°C. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
Median Price
$69.773
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
< 1k
RS (Exports)
1+ parts
$47.500
100+ parts
$44.180
1k+ parts
-
10k+ parts
Future Electronics
$49.710
TTI
$89.240
$62.230
Newark
$100.240
$81.370
$79.670
TE Connectivity
$139.610
Verical
Sager
$63.410
$53.400
Freelance Electronics
$28.549
Electro Sonic
$49.399
$45.897
American Microsemiconductor Inc.
$79.870
Nova Conductors
IBS Electronics
$76.520
$76.128
ComSIT Distribution GmbH
Component Sense
Extreme Components
Bisco
Electronic Supply
Carlton-Bates
Semicontronic
$41.410
$40.375
$40.168
Argo Parts USA
Continental Prestige Electronics
Netroflash
Perfect Parts
Having multiple approvals from reputable organizations like UL, CUL, and VDE signifies that this product meets high safety and quality standards.
The high rated voltage of 250V allows this EMI mains filter to effectively handle electrical load while providing optimal performance.
The single-phase EMI filter design helps in reducing electromagnetic interference and ensuring stable power supply for connected devices.
With a maximum operating temperature of 40°C, this filter can handle heat efficiently and maintain stable performance under varying environmental conditions.
The ability to operate at a minimum temperature of -10°C makes this filter suitable for use in a wide range of climates and environments.
The compact width of 79.25mm allows for easy installation and integration into various system setups.
Support for both 50Hz and 60Hz operating frequencies ensures compatibility with a wide range of electrical systems and equipment.
The high potential (High Pot) rating of 2250V indicates strong insulation properties and safety measures in place for this EMI mains filter.
The low maximum leakage current of 0.75mA minimizes energy wastage and enhances the efficiency of the filter.
The panel mount design allows for easy and secure installation of the filter on various panels and enclosures.
The compact dimensions make this EMI mains filter suitable for space-constrained applications without compromising on performance.
With a rated current of 30A, this filter can handle high electrical loads while maintaining stable operation and protecting connected devices.
The moderate height of 69.85mm ensures easy integration and compatibility with different system setups and configurations.
EMI Mains Filters 30VSK6 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
30VSK6 Filters trade compliance attributes, and parameters.
NSN
5915-01-523-0164, 5915015230164
NIIN
015230164
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Zetex Plc
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Devices
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Telcom Semiconductor
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Onsemi
Changzhou Starsea Electronics
STMicroelectronics
Transys Electronics
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SCF-01-5000
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 15 mm; No. of Terminals: 4; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 60 Cel;
S8V-NFS203
Omron
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Insulation Resistance: 100 Mohm; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
SSR21NH-031810
KEMET Corporation
KEMET Corporation's SSR21NH-031810 is a UL approved EMI mains filter with 250V rated voltage and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, has dimensions of L23.0xB23.0xH14.5 mm, and can handle 0.3A current. Ideal for single-phase EMI filtering in various electronic applications.
1-6609036-6
TE Connectivity's 1-6609036-6 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 40A. It operates b/w -10°C to 40°C, with max leakage current of 0.75mA. Ideal for panel mounting applications requiring effective electromagnetic interference suppression.
CMS1-4-R
Eaton Corporation
Eaton Corporation's CMS1-4-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 3.8A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6mm, it comes in tape and reel packaging for convenience.
CMS2-7-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.6 A; Width (mm): 8.89; Maximum Operating Temperature: 160 Cel; Mounting Type: SURFACE MOUNT; Length: 8.89 mm;
PLA10AN1522R0R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1522R0R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min Insulation Resistance, 300 V Rated Voltage, and 120 °C Max Operating Temp. It is used for EMI mains filtering applications requiring 2 A Rated Current in through-hole mounting setups.
RN112-0.5-02-18M
Schaffner Holding Ag
Schaffner Holding Ag's RN112-0.5-02-18M EMI Mains Filter is UL, IEC, VDE, ENEC-10 approved with 300V rated voltage and 0.5A current. Ideal for single-phase applications with operating temp range -40 to 100°C. Through-hole mount type filter with compact dimensions of L17.7xB17.1xH12.6mm suitable for 50/60Hz frequency use.
NBH-30-681-D
Cosel
The Cosel NBH-30-681-D is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 30A, it is suitable for DIN rail mounting in various applications requiring effective EMI filtering.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
B82722J2102N001
TDK
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
20VB1
TE Connectivity's 20VB1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 7 dB at min frequency and 48 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
CMS3-4-R
SINGLE PHASE EMI FILTER; Rated Current: 3.95 A; Maximum Operating Temperature: 160 Cel; Mounting Type: SURFACE MOUNT; Manufacturer Series: CMS; Minimum Operating Temperature: -40 Cel;
PLH10AN1612R1P2
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm; Dimensions: L18XB16XH17.5 (mm);
SS11V-R10093-CH
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Operating Frequency (Hz): 50Hz; Length: 22 mm; No. of Terminals: 4; Height: 21.5 mm;
SS11V-06180-CH
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Minimum Operating Temperature: -25 Cel; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 75 Cel; Dimensions: L22.0XB14.5XH21.5 (mm)/L0.866XB0.571XH0.846 (inch);
FN3270H-320-99
Schaffner Holding Ag's FN3270H-320-99 is a UL, CSA, ENEC-14 approved 3-phase EMI filter with 520V rated voltage and 320A rated current. With a max operating temperature of 100°C, it is ideal for panel mount applications requiring effective filtering at 60Hz frequency. Dimensions: L240.0xB200.0xH86.0mm.
6VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 6 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
3VR3
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 3 A; High Pot: 2250 V; Rated Voltage: 120 V; Insertion Loss At Minimum Frequency: 30 dB;
1600APS12L
TE Connectivity's 1600APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 1600A. With a max operating temperature of 50°C, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
30VSK6
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; High Pot: 2250 V; Dimensions: L125XB101.6XH69.85 (mm)/L4.92XB4XH2.75 (inch); Manufacturer Series: SK;
30VSK6C
SINGLE PHASE EMI FILTER; Rated Current: 30 A; Length: 125 mm; Approvals (V): UL; CUL; VDE; Width (mm): 79.25; Maximum Leakage Current: .75 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved