Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$1.500
Lifecycle Status
Suppliers In-Stock
124
In-Stock Inventory
1k+
Avnet
1+ parts
$1.016
100+ parts
$0.755
1k+ parts
-
10k+ parts
Arrow
$1.030
Chip1Stop
$1.300
Farnell
$1.490
$0.867
$0.825
Bürklin Elektronik
$0.920
Newark
$1.860
$1.050
$0.971
$0.871
Mouser Electronics
$2.320
$1.250
$1.000
$0.848
Distrelec
$2.361
$2.184
$1.820
$1.644
Element14
$2.580
$1.620
$1.520
Verical
Future Electronics
$0.820
$0.785
$0.745
EBV Elektronik
RS (Exports)
$1.565
$1.306
Freelance Electronics
$0.571
Voyager Components
$0.996
Digiode
$1.311
Nova Conductors
$1.530
Component Electronics Inc.
$1.540
$1.150
TME
$1.690
$1.010
$0.930
TEDSS.com
$2.000
$1.240
Forefront Electronics and Design
$7.350
American Microsemiconductor Inc.
Schukat
$0.876
$0.770
Vyrian
Chip Stock
Ashlea Components Ltd
Kruse Electronics AG
Kruse
Micros sp.j. W. Kędra i J. Lic
$1.248
$1.219
Micros
$0.183
$0.177
Bristol Electronics
Partservice
$1.158
$1.138
NexGen Digital
Infinite Electronics LLP
MRC Electronics
ComSIT USA
Lakeview Electronics
Rapid Electronics
$3.003
Cyclops Electronics Ltd
Standard Data Resources
Rebound Electronics
Manoshevitz Elec. Sales
Connector Distribution Corp
Right Parts Inc.
LWI Electronics Inc
Pegasus Components GmbH
ECAB
ABC Electronics Ltd.
Semi Source
Prism Electronics
Q Components
Speed Components Ltd
EPE Components Inc.
Electronic Expediters
SOS electronic
$1.103
$1.063
Carlin Systems, Inc.
J & M Industries LLC
Technoshack Inc.
IBS Electronics
$1.122
$1.087
Atlantic Semiconductor
Cogito LLC
North Shore Components
CirComp Electronics, Inc.
A2Z Electronics, Inc.
Global Solutions Electronics Company
Anansix
LittleDiode
Whistler Technology
LIBRA Elektronik GmbH
MISTER SPROCKETS
R&J Components
QIE Inc.
Semtec, LLC
Inventory MP
Mentor Electronics Marketing, LLC
Resion
Corel Iberica Componentes, S.L.
Inland Empire Components Inc.
GES GmbH
Extreme Components
PC Components Company LLC
Sogenti Electronics
Velocity Electronics
Huijzer Components
Sea View Technologies
Zilex Electronics Inc.
Classic Components Corporation
Sinequanon
Sunrise Surplus Inc.
Fibra_Brandt Electronic GMBH
Electronics Depot
Vectronix, Inc
Digital Electronic Gebert Verwaltungs UG
Odintec Ltd.
Odi Ramu Company
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Martec Srl
Electro Mavin
Legend Electronics Inc.
NAC Semi
ACDS - Activité Composants Distribution Service
Mil-Aero Solutions, Inc.
Diverse Electronics
Holdelec - ElecDif-Pro
Rutronik
$0.344
$0.318
EZ Electronic Parts
Greenchips
Rotakorn
A&K Electronics
Pride Electronics
Manotoh
Quantum Digital Technology
First Choice Components Inc.
Ack Elektronik San.Tic.Ltd.Sti
Lonics
Tectiva GmbH
Sensible Micro Corp
EMSNET
Contempo Components LLC
PAR Electronics
Component Sense
Kiltronic GmbH
ComSIT Distribution GmbH
Amar Radio Corporation
ChromeModa Solutions
$0.642
$0.526
Semicontronic
$0.650
$0.634
$0.630
Corphita
$1.242
Argo Parts USA
$1.494
Aranea Global
$1.499
$1.439
IDEA Electronic Components Group
$1.539
$1.385
Continental Prestige Electronics
$2.650
$1.700
$1.080
DigiPath Technology Company
$2.894
MKK Technologies
Andel Nordic
$4.514
$4.333
Modulus Dynamics
$7.275
Corohmni
$12.873
Aztec Data Supply Inc.
$13.597
Microchip USA
$18.590
$18.480
$18.420
$18.360
Perfect Parts
Glotronic Ltd.
RC Electronics
$1.480
$1.350
$1.310
GreenTree Electronics
Authorized Procurement Solutions
Futuretech Components
Eastek
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Assy Fe
SupplyDigital Components
Lixinc
Alle Elektronik GmbH
Problanco Electronics
Infinite Electronics LLP (Excess)
Kulean Microsystems
$0.648
S.R.D Solutions
Formix International (Excess)
Epart123
$0.875
TANS Electronics
Parana Technologies
$1.840
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
Robosynatics
$13.446
$13.171
Allen Electronics Distributors
UHIMA Technologies
Netroflash
$1.453
$1.423
Speed Components Ltd (Excess)
Eliminating Global Boundries, Inc
A-Plus Industry Inc.
Computer Components Inc. - USA
Montclair Electronics, Inc.
Peripheral Drivers ULN-2803A attributes and parameters. Explore more Peripheral Drivers devices from Sprague Electric
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Output Characteristics:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Position:
ULN-2803A Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
Lite-on Semiconductor
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
MIC5841YWM-TR
Micrel
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;
SZNUD3124DMT1G
SZNUD3124DMT1G by Onsemi is a MOS technology peripheral driver with AEC-Q101 screening. It features a small outline, thin profile package style and can handle up to 200mA supply current at 28V. Ideal for applications requiring transient protection and sink output current flow direction in automotive electronics.
ISO8200BTR
STMicroelectronics
ISO8200BTR by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 36 V. This automotive-grade IC features a turn-on time of 22 us and nominal output peak current limit of 1.1 A, making it ideal for buffer or inverter-based applications in the automotive industry.
VNS1NV04DPTR-E
STMicroelectronics VNS1NV04DPTR-E is an 8-terminal peripheral driver with GULL WING terminals. It features a peak reflow temperature of 260°C and sink output current flow direction. Ideal for applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface IC type in a SMALL OUTLINE package.
IRS2011SPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VN808TR-E
STMicroelectronics' VN808TR-E is a peripheral driver with 8 functions, max supply voltage of 45V, and built-in protections. It is used as a buffer or inverter based peripheral driver for applications requiring a max output current of 0.5A and turn-on time of 100us.
IMP803LG/T
Imp
IMP803LG/T by Imp is a CMOS peripheral driver with 8 terminals, operating from -40 to 85 °C. It has a supply voltage range of 2-6.5 V and supports half bridge based applications with source/sink current flow direction. Ideal for industrial use due to its small outline package style and dual terminal position.
L293NE
Texas Instruments
L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.
FPF2700MX
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BTS7960BNTMA1
Infineon Technologies
BTS7960BNTMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max supply voltage of 27.5V and nominal output peak current limit of 62A. Ideal for applications requiring a half bridge based peripheral driver with source and sink output current flow direction.
BTS3408GXT
BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.
BTS141TCBUMA1
BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
BTN8982TAAUMA1
BTN8982TAAUMA1 by Infineon Technologies is a peripheral driver with 7 terminals and built-in protections for transient, over current, thermal, and under voltage. It operates at supply voltages ranging from 8V to 18V, making it suitable for automotive applications. The device features a turn-on time of 36µs and a nominal output peak current limit of 77A in a small outline package style.
AUIPS2041LTR
AUIPS2041LTR by Infineon is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 6V to 50V and has a turn-on time of 4µs and turn-off time of 8µs. This small outline package is ideal for applications requiring source and sink output current flow direction.
VNQ7140AJ-E
STMicroelectronics' VNQ7140AJ-E is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w 4V to 28V, with turn-on time of 120us and turn-off time of 100us. Ideal for applications requiring sink output current flow direction in compact spaces.
VNQ5E160KTR-E
STMicroelectronics' VNQ5E160KTR-E is a full bridge peripheral driver with 4 bits. It has built-in protections for transient, over current, thermal, and under voltage. With a max supply voltage of 28V, it's ideal for applications requiring high power supplies and source output current flow direction.
BTS6163DXT
BTS6163DXT by Infineon is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5.5V to 24V and has a nominal output peak current limit of 6.5A. This rectangular package is suitable for automotive applications requiring high reliability under harsh conditions.
BTS716GXUMA1
BTS716GXUMA1 by Infineon Technologies is a peripheral driver with 4 functions, operating at a supply voltage range of 5.5V to 40V. It offers built-in protections against transient, overvoltage, thermal, and undervoltage conditions. This small outline package is ideal for applications requiring a nominal output peak current limit of 5.3A and turn-on/off times of 250us and 270us respectively.
VN5050J-E
STMicroelectronics' VN5050J-E is a peripheral driver with 12 terminals and built-in protections. It operates on power supplies ranging from 8V to 36V, making it suitable for various applications requiring buffer or inverter-based interface ICs. The compact rectangular package with a low profile and gull wing terminal form makes it ideal for space-constrained designs.
BTS452RATMA1
BTS452RATMA1 by Infineon Technologies is a small outline peripheral driver with 4 terminals. It has built-in protections for transient, over current, and over voltage. With a max supply voltage of 52V, it is suitable for various applications requiring source and sink output current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803A
Youtai Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
ULN2003ADR2G
ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.
Rochester Electronics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;
ULN2803AN
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
Motorola
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Taejin Technology
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: .5 A; No. of Functions: 1;
ULN2003D1013TR
STMicroelectronics ULN2003D1013TR is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring fast turn-on/off times in a small outline package.
ULN2803CDWR
ULN2803CDWR by Texas Instruments is an 8-function peripheral driver with open-collector output characteristics. It has built-in transient protections and a nominal output peak current limit of 0.5A, making it ideal for applications requiring sink current flow direction such as motor control systems.
ULN-2003A
Sprague Electric
ULN-2003A by Sprague Electric is a 7-bit bipolar peripheral driver with a max output current of 0.35 A and nominal voltage of 50 V. It features a rectangular plastic/epoxy package, dual terminal position, and operates in temperatures ranging from 0 to 70°C. Ideal for driving various loads in commercial applications.
ULN2003A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;
Allegro MicroSystems
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
Diodes Incorporated
Sgs-ates Componenti Electronici S P A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
ULN-2802R
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved