Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Cosel EAC-10-102-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 10A. It operates at temperatures ranging from -40 to 85°C and has a high pot of 2500V. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
Median Price
$26.130
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Ampacity Inc.
$0.400
AZTECH Wire
$0.770
$0.740
$0.720
$0.710
Continental Prestige Electronics
$25.607
Netroflash
Argo Parts USA
Having multiple approvals ensures that the product meets various safety and quality standards, making it a reliable choice.
The high rated voltage allows the filter to be used in a wide range of applications, providing flexibility.
A single phase EMI filter helps in reducing electromagnetic interference, ensuring better performance of connected devices.
With a high maximum operating temperature, the filter can withstand extended usage without overheating, increasing its durability.
The low minimum operating temperature allows the filter to be used in cold environments without any issues, enhancing its versatility.
The compact width makes the filter easy to install in confined spaces, making it suitable for various setups.
Operating at a standard frequency of 60Hz ensures compatibility with most electrical systems, making it a versatile choice.
The appropriate length provides sufficient surface area for effective filtering, enhancing the performance of the product.
The high potential voltage ensures reliable insulation and protection against electrical breakdown, enhancing safety.
The low maximum leakage current indicates minimal loss of current through the filter, improving energy efficiency.
The DIN rail mounting option simplifies the installation process, providing convenience and ease of use.
The compact dimensions make the filter suitable for various applications, offering flexibility in installation.
With a high rated current capacity, the filter can handle larger loads without any issues, ensuring reliability.
The moderate height allows for easy integration into different setups, making it a versatile choice for various applications.
EMI Mains Filters EAC-10-102-D attributes and parameters. Explore more EMI Mains Filters devices from Cosel
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Manufacture and sale of electronic equipment and electrical equipment. Main product - DC stabilized power supply (switching power supply, etc.)
1552200253
Molex
WIRE AND CABLE;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Lite-on Semiconductor
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
3-103-678
Schurter Ag
Schurter Ag's 3-103-678 EMI Mains Filter is a single-phase filter with 250V rated voltage and 16A current. With approvals from CSA, EN, IEC, and UL, it operates b/w -40°C to 100°C. Ideal for panel mounting applications in various industries due to its compact size of 25mm x 85mm x 89.5mm.
400APS12P
TE Connectivity
TE Connectivity's 400APS12P is a UL-approved THREE PHASE EMI FILTER with 690V rated voltage and 400A rated current. With a wide operating temperature range (-10 to 50 °C), it is ideal for panel mount applications requiring high pot (2640V) and low leakage current (390mA).
3VSK1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Height: 29.5 mm; Minimum Frequency: .01 MHz;
SCF25XV-240-2R0A006JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
B84112B0000B120
TDK
The TDK B84112B0000B120 is a UL, CSA, ENEC-10 approved 250V single-phase EMI mains filter with 20A rated current. With dimensions of L99xB84xH38.1 mm, it offers high pot of 2700V and 0.5mA max leakage current. Ideal for panel mount applications in filtering electromagnetic interference at 50/60Hz frequency.
CMS3-1-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; Packing Method: TAPE AND REEL; Approvals (V): UL; Dimensions: L11.43XB11.43XH6 (mm); Minimum Operating Temperature: -40 Cel;
SU9V-R01180
SU9V-R01180 by KEMET is an EMI mains filter with a rated voltage of 250V and insulation resistance of 100 Mohm. It operates b/w -25°C to 120°C, making it suitable for various applications requiring UL approval. With dimensions of 11mm x 17mm x 17mm, it is designed for through-hole mounting at a rated current of 0.1A.
SC-030-E150JH-P
KEMET Corporation's SC-030-E150JH-P is a UL approved EMI mains filter with 250V rated voltage, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and has a diameter of 31mm.
RSEL-2003WL
The TDK RSEL-2003WL is a single-phase EMI filter with 250V rated voltage and 3A rated current. It offers high insulation resistance of 100 Mohm, approvals from CSA, ENEC-14, and UL. Ideal for panel mounting applications in environments ranging from -25°C to 85°C.
B82722S0193A041
TDK's B82722S0193A041 is a 48V single-phase EMI mains filter with 19A rated current. It operates b/w -40°C to 125°C, suitable for IEC approvals and surface mount installation. Ideal for applications requiring effective filtering at 50/60Hz frequency in compact spaces.
SN13-500
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 18 mm; Packing Method: TRAY; Diameter (mm): 31; Mounting Type: THROUGH HOLE MOUNT;
FMAD-0934-5010
Schurter Ag's FMAD-0934-5010 EMI Mains Filter is UL, CUL, VDE, ENEC-10 approved with 480V rated voltage and 50A rated current. It operates at -25 to 100°C temperature range and offers a high pot of 3000V. Ideal for three-phase applications with panel mount installation.
UF1717V-300Y1R2-03
UF1717V-300Y1R2-03 by TDK is a single-phase EMI mains filter with 4 terminals and rated voltage of 280V. It offers a min insulation resistance of 100 Mohm, operates at temperatures from -20 to 120 °C, and has UL, CSA, IEC approvals. Ideal for applications requiring noise suppression in electrical systems.
SC-06-10JS
KEMET Corporation's SC-06-10JS is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 105°C, and measures 26mm x 29mm x 12mm. Ideal for EMI mains filtering applications with through hole mounting.
EH20-1.5-02-1M8
Schaffner Holding Ag
EH20-1.5-02-1M8 by Schaffner Holding Ag is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage and 1.5A rated current. Operating at -25 to 100 °C, it offers high pot of 2000V and operates at 400Hz frequency. Ideal for applications requiring EMI mains filtering in compact spaces with through hole mounting.
RSEN-2010D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 35 mm; Maximum Leakage Current: 1 mA; Approvals (V): UL; CSA; EN; Maximum Operating Temperature: 85 Cel;
FN3256H-120-35-R69
Schaffner's FN3256H-120-35-R69 is a 3-phase EMI filter with 480V rated voltage, 120A current, and -25 to 100°C operating temperature range. Approved by EN, IEC, CSA, UL for applications requiring high-potential of 1300V and max leakage current of 0.9mA. Ideal for panel mounting in industrial settings with a frequency of 60Hz.
NBH-30-681-D
Cosel
The Cosel NBH-30-681-D is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 30A, it is suitable for DIN rail mounting in various applications requiring effective EMI filtering.
SS11V-06180-CH
SS11V-06180-CH by KEMET is a SINGLE PHASE EMI FILTER with 250V rated voltage, 0.6A rated current, and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, has dimensions of L22.0xB14.5xH21.5 mm, and withstands high pot testing up to 500V. Ideal for EMI mains filtering applications with through hole mounting requirements.
6EHQ1
SINGLE PHASE EMI FILTER; Maximum Frequency: .15 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Maximum Frequency: 42 dB; Maximum Leakage Current: .002 mA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EAC-10-102
EAC-10-102 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 10A, it is suitable for chassis mount applications requiring effective filtering at 60Hz.
EAC-10-222-D
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Width (mm): 39.0; High Pot: 2500 V; Maximum Leakage Current: .5 mA; Approvals (V): UL; CSA; VDE; ENEC-10;
EAC-10-222
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): UL; CSA; VDE; ENEC-10; Length: 85 mm; Height: 30 mm; Minimum Operating Temperature: -40 Cel;
EAC-10-332-D
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): UL; CSA; VDE; ENEC-10; Mounting Type: DIN RAIL MOUNT; Operating Frequency (Hz): 60Hz; Height: 30 mm;
EAC-10-332
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Maximum Operating Temperature: 85 Cel; Width (mm): 39.0; Rated Voltage: 250 V; Minimum Operating Temperature: -40 Cel;
EAC-10-472-D
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Operating Frequency (Hz): 60Hz; Minimum Operating Temperature: -40 Cel; Maximum Leakage Current: 1 mA; Rated Voltage: 250 V;
EAC-10-472
Cosel EAC-10-472 is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI filter with 250V rated voltage and 10A rated current. It operates b/w -40°C to 85°C, has a high pot of 2500V, and max leakage current of 1mA. Ideal for chassis mount applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
EAC-10-681-D
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Width (mm): 39.0; Height: 30 mm; Rated Voltage: 250 V; Mounting Type: DIN RAIL MOUNT;
EAC-10-681
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch); Maximum Leakage Current: .15 mA; Length: 85 mm; Mounting Type: CHASSIS MOUNT;
EAC-16-102-D
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Maximum Leakage Current: .25 mA; Maximum Operating Temperature: 85 Cel; Width (mm): 39.0; Rated Voltage: 250 V;
EAC-16-102
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Rated Voltage: 250 V; Mounting Type: CHASSIS MOUNT; Maximum Leakage Current: .25 mA; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch);
EAC-16-222-D
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Height: 30 mm; Mounting Type: DIN RAIL MOUNT; Length: 85 mm; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch);
EAC-16-222
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Width (mm): 39.0; High Pot: 2500 V; Height: 30 mm; Operating Frequency (Hz): 60Hz;
EAC-16-332-D
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Maximum Leakage Current: .75 mA; Height: 30 mm; Width (mm): 39.0; Rated Voltage: 250 V;
EAC-16-332
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Operating Frequency (Hz): 60Hz; Width (mm): 39.0; Mounting Type: CHASSIS MOUNT; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch);
EAC-16-472-D
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch); Maximum Leakage Current: 1 mA; Length: 85 mm; Rated Voltage: 250 V;
EAC-16-472
SINGLE PHASE EMI FILTER; Rated Current: 16 A; High Pot: 2500 V; Minimum Operating Temperature: -40 Cel; Width (mm): 39.0; Approvals (V): UL; CSA; VDE; ENEC-10;
EAC-16-681-D
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Maximum Operating Temperature: 85 Cel; Approvals (V): UL; CSA; VDE; ENEC-10; Mounting Type: DIN RAIL MOUNT; Dimensions: L85.0XB39.0XH30.0 (mm)/L3.346XB1.535XH1.181 (inch);
EAC-16-681
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Maximum Leakage Current: .15 mA; Operating Frequency (Hz): 60Hz; Mounting Type: CHASSIS MOUNT; Approvals (V): UL; CSA; VDE; ENEC-10;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved