Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 7448031002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A current. It operates b/w -40°C to 125°C, ideal for ENEC-10; VDE approved applications requiring EMI mains filtering.
Median Price
$12.000
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$9.910
100+ parts
$7.570
1k+ parts
-
10k+ parts
Chip1Stop
$11.800
$10.300
$7.620
$6.760
Bürklin Elektronik
$10.550
$8.110
RS Americas
$12.320
$8.750
Element14
$12.738
$9.790
$9.098
Mouser Electronics
$13.620
$11.340
Newark
$15.240
$12.960
RS (Exports)
$7.164
Verical
$9.490
Nova Conductors
$8.720
Ozdisan Elektronik
$10.788
Chip Stock
VNN
Vyrian
Semtec, LLC
Advanced Electronics
$0.997
$0.907
$0.818
Aztec Data Supply Inc.
$1.840
Corohmni
$3.487
Ampacity Inc.
$6.090
Semicontronic
$5.938
$5.907
Continental Prestige Electronics
$8.546
Netroflash
Kepictronics
Argo Parts USA
GreenTree Electronics
Speed Components Ltd (Excess)
Perfect Parts
Having ENEC-10 and VDE approvals ensures that this product meets strict safety and quality standards, making it a reliable choice for use in electrical applications.
The high rated voltage of 250V allows this EMI mains filter to effectively handle electrical signals and interference at standard voltage levels, providing efficient filtering performance.
The single-phase EMI filter design helps to suppress electromagnetic interference from electrical equipment and noise, ensuring clean power supply and improved performance of connected devices.
With a high maximum operating temperature of 125°C, this EMI mains filter can withstand heat generated during operation, making it suitable for use in various industrial and electronic applications.
The low minimum operating temperature of -40°C ensures reliable performance even in cold environments, providing versatility in installation and use.
The compact width of 17mm allows for easy installation and space-saving in electronic enclosures or circuit boards, making this EMI filter a practical choice for various applications.
Designed for the standard 50Hz operating frequency, this EMI mains filter is optimized to effectively filter out interference and noise at typical power frequencies, ensuring stable operation of electrical systems.
The length of 23mm provides a balanced design that allows for efficient filtering performance while maintaining a compact form factor, ideal for integration in different electronic devices or equipment.
Packaged in trays for convenient handling and storage, this EMI mains filter is easy to transport and organize, ensuring efficient inventory management and assembly processes.
Featuring through-hole mounting, this EMI filter can be securely attached to circuit boards or enclosures, providing reliable mechanical support and connection for stable operation in various applications.
With a rated current of 10A, this EMI mains filter can effectively handle electrical loads up to the specified limit, ensuring reliable performance and protection against overcurrent conditions.
The height of 25mm offers a compact yet sturdy construction for the EMI filter, allowing for easy integration into different types of equipment or installations, while maintaining durability and performance.
EMI Mains Filters 7448031002 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Toshiba
SPC TECHNOLOGY/ MULTICOMP
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
FMW-65-0002
Schurter Ag
Schurter Ag's FMW-65-0002 is a THREE PHASE EMI FILTER with a rated voltage of 440V. It has a max operating temperature of 100°C and a high pot of 3000V. This panel mount filter is suitable for applications requiring EMI mains filtering.
SS11VL-R22020
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2.2 A; Width (mm): 14.5; Operating Frequency (Hz): 50Hz; Rated Voltage: 250 V; Height: 19.5 mm;
7448227005
Wuerth Elektronik & Kg
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
SSHB21HS-18046
KEMET Corporation's SSHB21HS-18046 is a UL approved EMI mains filter with 250V rated voltage and 1.8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and has a compact size of 23mm x 26mm x 15.5mm. Ideal for applications requiring single-phase EMI filtering in various electronic devices.
B82722A2301N001
TDK
The TDK B82722A2301N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, 50/60Hz operating frequency, and tin over nickel terminal finish. Ideal for applications requiring effective electromagnetic interference suppression in electronic devices.
FN2070-10-06
Schaffner Holding Ag
FN2070-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 250V rated voltage and 11.5A rated current. It has approvals from UL, CSA, and ENEC-14, making it suitable for applications requiring effective electromagnetic interference suppression in electrical systems. With dimensions of L130.5XB56.0XH45.4 (mm), this chassis mount filter operates b/w -25°C to 100°C, offering reliable performance in various environments.
RN212-0.5-02-18M
RN212-0.5-02-18M by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.5A rated current. It operates b/w -40°C to 100°C, suitable for applications requiring EMI mains filtering. With UL, IEC, VDE, and ENEC-10 approvals, it's ideal for through-hole mounting in various electronic devices.
SSR10V-07330
KEMET Corporation's SSR10V-07330 is a UL approved EMI mains filter with 250V rated voltage and 0.7A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and has a compact size of 18mm x 22mm x 13.5mm. Ideal for single-phase EMI filtering applications requiring high pot (500V) protection.
16BCF10
TE Connectivity
TE Connectivity's 16BCF10 EMI Mains Filter is a THREE PHASE filter with UL and VDE approvals, rated for 277V and 16A. With a max operating temperature of 50°C and min of -10°C, it is ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
5500.2044
The Schurter Ag 5500.2044 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, operating temperature range from -25°C to 100°C, and max leakage current of 0.5mA. Ideal for panel mount applications with dimensions of L52.0xB46.0xH31.0mm.
400APS12L
TE Connectivity's 400APS12L is a UL-approved THREE PHASE EMI FILTER with a rated voltage of 520V and max operating temperature of 50°C. With a rated current of 400A, it is ideal for panel mount applications requiring high-pot testing up to 2200V and low leakage current of 270mA.
400APS12P
TE Connectivity's 400APS12P is a UL-approved THREE PHASE EMI FILTER with 690V rated voltage and 400A rated current. With a wide operating temperature range (-10 to 50 °C), it is ideal for panel mount applications requiring high pot (2640V) and low leakage current (390mA).
25FCD10
TE Connectivity's 25FCD10 EMI Mains Filter is a UL approved three-phase filter with insertion loss of 13-35 dB. Rated at 277V and 25A, it operates b/w -10°C to 40°C, with dimensions of L214.0xB159.0xH64.0 mm. Ideal for applications requiring high-potential and low leakage current protection in industrial settings.
7448680100
Wurth Elektronik 7448680100 is a SINGLE PHASE EMI FILTER with 250V rating, 9.5A current, and -40 to 60°C operating temperature range. Ideal for IEC-approved applications requiring EMI mains filtering in through-hole mounting setups.
FN406-0.5-02
FN406-0.5-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 0.5A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and dimensions of L45.0xB15.0xH28.0 mm. Ideal for single-phase EMI filtering applications in various industries.
3VSK1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 1 MHz; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Height: 29.5 mm; Minimum Frequency: .01 MHz;
RWK3044-24-89-E0XXX
The Schaffner Holding Ag RWK3044-24-89-E0XXX EMI Mains Filter has a rated voltage of 530V and a max operating temperature of 45°C. With a rated current of 24.1A, it is ideal for panel mount applications requiring effective filtering at an operating frequency of 50Hz.
SS21V-R300013
KEMET Corporation's SS21V-R300013 EMI Mains Filter is UL approved with 250V rating, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and features a compact size of L20.6xB16.8xH24.5 mm for through-hole mounting in various electronic devices.
SU9V-02080
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Terminal Finish: NOT SPECIFIED; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Length: 17 mm;
7448030417
Wurth Elektronik 7448030417 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4A rated current. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals in applications requiring EMI mains filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74482210002
Wurth Elektronik
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Additional Features: INDUCTANCE 0.175 MILLI HENRY; Dimensions: L18.5XB14.5XH22.0 (mm)/L0.728XB0.571XH0.866 (inch); Height: 22 mm; Mounting Type: THROUGH HOLE MOUNT;
7448031501
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
744844221
Wurth Elektronik 744844221 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 125°C, ideal for EMI mains filtering applications. Compact at L28.0xB18.5xH33.0 (mm), it offers through-hole mounting for easy installation in various systems.
7448051804
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
7448030509
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Dimensions: L22.0XB13.5XH25.0 (mm)/L0.866XB0.531XH0.984 (inch); Maximum Operating Temperature: 125 Cel; Height: 25 mm; Rated Voltage: 250 V;
7448051012
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 33 mm; Rated Voltage: 250 V; Packing Method: CARTON; Width (mm): 23;
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
744839010400
THREE PHASE EMI FILTER; Rated Current: 40 A; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Approvals (V): IEC; Packing Method: TRAY;
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
7448680120
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Length: 27.5 mm; Rated Voltage: 250 V;
7448040707
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 28 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L28.0XB19.0XH28.0 (mm)/L1.102XB0.748XH1.102 (inch); Terminal Finish: TIN COPPER;
7448040435
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e2; Approvals (V): ENEC-10; VDE; Terminal Finish: TIN COPPER;
744841414
Wurth Elektronik's 744841414 is a single-phase EMI mains filter with a rated voltage of 250V and max operating temperature of 125°C. It has approvals from ENEC-10, IEC, VDE and dimensions of L16.0xB7.5xH17.5 (mm). Ideal for applications requiring effective EMI filtering in electronic systems with a rated current of 4A.
7448014501
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Mounting Type: THROUGH HOLE MOUNT; Length: 15 mm; Height: 16 mm; Maximum Operating Temperature: 125 Cel;
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 13.5; Minimum Operating Temperature: -40 Cel; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz;
744834407
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Length: 32.5 mm; Terminal Finish: Tin (Sn) over Copper (Cu); Width (mm): 28.0; Rated Voltage: 250 V;
744844471
SINGLE PHASE EMI FILTER; Rated Current: 9 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -40 Cel;
7448041104
SINGLE PHASE EMI FILTER; Rated Current: 11 A; Length: 28 mm; JESD-609 Code: e2; Terminal Finish: TIN COPPER; Approvals (V): ENEC-10; VDE;
7448030333
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Maximum Operating Temperature: 125 Cel; Length: 22 mm; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved