Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER;
Median Price
$15.660
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
Arrow
1+ parts
$11.497
100+ parts
-
1k+ parts
10k+ parts
Verical
Mouser Electronics
$11.130
$9.720
Newark
$15.700
$11.770
DigiKey
$15.760
$11.139
$9.721
Nova Conductors
Corohmni
$2.459
Ampacity Inc.
$6.180
Continental Prestige Electronics
$9.790
$7.040
Argo Parts USA
Aranea Global
EMI Mains Filters SCF25XV-240-2R0A006JH attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Filter Type:
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Microsemi
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148W-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SC-08-E075J
KEMET Corporation
KEMET Corporation's SC-08-E075J is a UL approved EMI mains filter with 250V rated voltage and 8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot rating of 500V. Ideal for single-phase applications, this filter is mounted through hole and measures 16mm in width by 25mm in length at a height of 25.5mm.
SSHB21HS-08200
KEMET Corporation's SSHB21HS-08200 is a UL-approved EMI mains filter with 100 Mohm min insulation resistance, rated for 250V. This single-phase filter operates b/w -25°C to 130°C and has a max high pot of 500V. Ideal for through-hole mounting applications requiring 0.8A current handling capacity.
CMS3-2-R
Eaton Corporation
Eaton Corporation's CMS3-2-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 5.1A. Ideal for surface mount applications due to its compact size of L11.43xB11.43xH6.0mm, it features Tin/Silver/Copper terminal finish in tape and reel packaging.
SSRH7H-M04596
KEMET Corporation's SSRH7H-M04596 is a UL approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures ranging from -25°C to 120°C and has a rated voltage of 250V. This single-phase filter, with a rated current of 0.4A, is designed for through-hole mounting applications.
SC-06-10JS
KEMET Corporation's SC-06-10JS is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 105°C, and measures 26mm x 29mm x 12mm. Ideal for EMI mains filtering applications with through hole mounting.
FN2010-6-06
Schaffner Holding Ag
FN2010-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.9A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.66mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
RSEL-2003WL
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 60Hz; Width (mm): 45;
B82722-A2102-N1
TDK
TDK's B82722-A2102-N1 is a 250V rated SINGLE PHASE EMI FILTER with 1A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. Ideal for EMI mains filtering applications due to its compact size and through-hole mounting type.
SN13-500
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 18 mm; Packing Method: TRAY; Diameter (mm): 31; Mounting Type: THROUGH HOLE MOUNT;
CMS2-2-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 4.4 A; Width (mm): 8.89; Maximum Operating Temperature: 160 Cel; Length: 8.89 mm; Minimum Operating Temperature: -40 Cel;
SS11VL-R06270
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Length: 22 mm; Width (mm): 14.5; Maximum Operating Temperature: 75 Cel; Rated Voltage: 250 V;
3-123-459
Schurter Ag
3-123-459 by Schurter Ag is a THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 16A. It has approvals from IEC, UL, VDE for applications requiring EMI mains filtering. With a high pot of 2750V and operating temperatures ranging from -40 to 100 °C, it is suitable for panel mount installations in industrial settings.
CMS1-5-R
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; Height: 2.6 mm;
FN3288HVIT-100-35-C26-R60
Schaffner Holding Ag's FN3288HVIT-100-35-C26-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and -40 to 100°C operating temperature range. It has approvals from IEC and UL, high pot of 3530V, and max leakage current of 2.6mA. Ideal for panel mounting applications requiring effective mains filtering at 60Hz frequency.
3-103-675
The Schurter Ag 3-103-675 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 6A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
25FCD10
TE Connectivity
TE Connectivity's 25FCD10 EMI Mains Filter is a UL approved three-phase filter with insertion loss of 13-35 dB. Rated at 277V and 25A, it operates b/w -10°C to 40°C, with dimensions of L214.0xB159.0xH64.0 mm. Ideal for applications requiring high-potential and low leakage current protection in industrial settings.
DR334A-513AE
DR334A-513AE by Bourns is a SINGLE PHASE EMI FILTER with 42V rated voltage, operating from -40 to 135 °C. Measuring 6mm in length, 5.8mm in width, and 3.6mm in height, it's ideal for EMI mains filtering applications at 60Hz frequency using surface mounting method.
SSRH7HS-M07154
Mains Filters;
FN2410H-100-34
The Schaffner Holding Ag FN2410H-100-34 is a single-phase EMI mains filter with 520V rated voltage and 100A rated current. It has approvals from UL, CSA, and ENEC-14, suitable for applications requiring high pot of 2250V and max leakage current of 3.4mA. With DIN rail mounting and compact dimensions of L140.0xB115.0xH100.0 mm, it operates b/w -25°C to 100°C at an operating frequency of 250Hz.
CMS2-5-R
SINGLE PHASE EMI FILTER; Rated Current: 2.3 A; Height: 6 mm; Dimensions: L8.89XB8.89XH6 (mm); Length: 8.89 mm; Approvals (V): UL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SCF25-08-1300
SINGLE PHASE EMI FILTER; Rated Current: 8 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 70 Cel; Height: 32 mm;
SCF20-05-550
KEMET Corporation's SCF20-05-550 is a single-phase EMI mains filter with 4 terminals, rated for 250V and 5A. Operating b/w -25°C to 70°C, it has dimensions of L25.0xB15.5xH25.0 mm and is designed for through-hole mounting applications at 50Hz frequency. Ideal for noise suppression in electronic equipment requiring EMI filtering in compact spaces.
SINGLE PHASE EMI FILTER; Rated Current: 5 A; No. of Terminals: 4; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Width (mm): 15.5;
SCF25XV-130-1R5A012JV
SCF25XV-310-2R3A004JV
SCF25XV-170-1R7A009JV
SCF25XV-240-2R0A006JV
SCF25XV-280-2R1A005JV
SCF29XV-270-2R3A006JV
SCF20-05-1100
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Width (mm): 15.5; Maximum Operating Temperature: 50 Cel; Height: 25 mm; No. of Terminals: 4;
SCF29XV-050-1R0A044JH
SCF29XV-210-2R1A010JV
SCF25XV-190-1R8A008JH
SCF29XV-250-2R2A008JH
SCF29XV-200-2R0A011JV
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved