Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK's B82722A2302N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 3A rated current. It features single-phase filtering, TIN over nickel terminals, and operates at 50/60Hz. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression.
Median Price
$2.790
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Farnell
1+ parts
$1.170
100+ parts
$0.825
1k+ parts
$0.750
10k+ parts
-
Arrow
$1.988
$1.359
$1.268
$1.192
DigiKey
$1.884
$1.618
$1.417
Bürklin Elektronik
$2.910
$2.070
$1.720
Distrelec
$2.980
Element14
$3.500
$2.370
$2.030
Chip1Stop
$5.370
$1.290
$0.836
$0.817
RS (Exports)
$2.138
Verical
$2.002
Nova Conductors
$1.881
Ozdisan Elektronik
$2.111
TME
$2.260
$1.660
$1.530
$1.470
Vyrian
Semi Source
LIBRA Elektronik GmbH
VNN
Rutronik
$1.640
$1.410
Rebound Electronics
EMSNET
ComSIT Distribution GmbH
Corohmni
$0.632
AZTECH Wire
$1.060
$1.020
$1.000
$0.980
Ampacity Inc.
$1.140
Bastille Electronics
$1.787
$1.698
$1.674
Argo Parts USA
Continental Prestige Electronics
$2.690
$1.750
$1.460
Aztec Data Supply Inc.
$2.936
Perfect Parts
Abacus Technologies
Assy Fe
Allen Electronics Distributors
$1.920
Having multiple approvals ensures that the product meets international safety and performance standards, making it a reliable choice.
The high rated voltage allows the filter to handle electrical systems with a maximum voltage of 250V, providing protection against voltage spikes and fluctuations.
The single-phase EMI filter helps reduce electromagnetic interference, ensuring a cleaner power supply and improved performance of connected devices.
The tin over nickel terminal finish provides durability and corrosion resistance, ensuring a longer lifespan for the product.
The compact width of 22.3mm allows for easy installation in different electronic systems without taking up much space.
The filter's ability to operate at both 50Hz and 60Hz frequencies makes it versatile and suitable for various electrical applications.
With a length of 22.7mm, the filter can fit seamlessly into different electronic setups, contributing to a neat and organized arrangement.
The tray packing method ensures that the filters are securely stored and transported, preventing damage during handling and shipping.
The through-hole mounting type allows for easy and secure attachment of the filter onto circuit boards or electronic assemblies for effective noise reduction.
The 3A rated current indicates the maximum current the filter can safely handle, suitable for low to medium power applications requiring EMI suppression.
The compact height of 13.3mm enables the filter to be installed in tight spaces while maintaining efficient EMI filtering performance.
EMI Mains Filters B82722A2302N001 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Approvals (V):
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
Operating Frequency (Hz):
Packing Method:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
B82722A2302N001 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Rugao Dachang Electronic
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
SC-03-10G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Length: 17.5 mm; Minimum Insulation Resistance: 100 Mohm; Width (mm): 14; Rated Voltage: 250 V;
20VSK6
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Length: 113.3 mm; Rated Voltage: 120 V; Insertion Loss At Maximum Frequency: 48 dB;
FPP2-25-1/A
Schurter Ag
Schurter Ag's FPP2-25-1/A EMI Mains Filter is rated for 250V, 1A with approvals from UL, EN, IEC. It operates at 50/60Hz frequency, offers high pot of 2700V and max leakage current of 0.25mA. Ideal for applications requiring single-phase EMI filtering using through-hole mounting.
CMS2-1-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 5.35 A; Mounting Type: SURFACE MOUNT; Manufacturer Series: CMS; Height: 6 mm; Approvals (V): UL;
CMS1-7-R
Eaton Corporation
Eaton Corporation's CMS1-7-R is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 2.6A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
CMS1-11-R
SINGLE PHASE EMI FILTER; Rated Current: 1.35 A; Width (mm): 7.2; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel; Additional Features: INDUCTANCE 100 MICRO HENRY;
SCT19XV-150-1R3A006JV
KEMET Corporation
KEMET's SCT19XV-150-1R3A006JV is a SINGLE PHASE EMI FILTER with 1000V voltage rating, 15A current, and -40 to 150°C operating range. Ideal for EMI mains filtering applications due to its high insulation resistance of 100 Mohm. Dimensions: 18.4mm W x 27mm L x 27.5mm H, through-hole mount type.
SSRH7H-M11081
KEMET Corporation's SSRH7H-M11081 is a UL-approved EMI mains filter with 250V rated voltage and 1.1A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C temperatures. Ideal for applications requiring high insulation resistance and effective noise suppression in compact spaces.
SC-10-30J
KEMET Corporation's SC-10-30J is a UL approved EMI mains filter with 100 Mohm min insulation resistance, 250V rated voltage, and 10A rated current. It operates b/w -25°C to 105°C, ideal for single-phase EMI filtering applications requiring through-hole mounting in compact spaces.
FN406-8.4-02
Schaffner Holding Ag
Schaffner Holding Ag's FN406-8.4-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 8.4A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2000V. Ideal for applications requiring through-hole mounting in electronics to reduce electromagnetic interference on mains power lines.
PLH10AN1612R1P2
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Minimum Operating Temperature: -25 Cel; Minimum Insulation Resistance: 100 Mohm; Length: 18 mm; Dimensions: L18XB16XH17.5 (mm);
SU9V-R01180
SU9V-R01180 by KEMET is an EMI mains filter with a rated voltage of 250V and insulation resistance of 100 Mohm. It operates b/w -25°C to 120°C, making it suitable for various applications requiring UL approval. With dimensions of 11mm x 17mm x 17mm, it is designed for through-hole mounting at a rated current of 0.1A.
SCF25XV-280-2R1A005JV
SINGLE PHASE EMI FILTER;
FN2070-3-06
FN2070-3-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 3.5A, and operates at temperatures ranging from -25°C to 100°C. This chassis mount filter is ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
LF-202A
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 300 Mohm; Width (mm): 32.0; Maximum Leakage Current: 1 mA; Dimensions: L64.0XB32.0XH25.0 (mm)/L2.52XB1.26XH0.984 (inch);
SSR21NV-M18164
SINGLE PHASE EMI FILTER; Rated Current: 1.8 A; Height: 27 mm; High Pot: 500 V; Minimum Insulation Resistance: 100 Mohm; Rated Voltage: 250 V;
FIL-1S-1-10A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Width (mm): 45; Height: 99 mm;
SS20H-R10100
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 22 mm; High Pot: 2400 V; Mounting Type: THROUGH HOLE MOUNT;
DKIH-3358-326K-NK
Schurter Ag's DKIH-3358-326K-NK is a 3-phase EMI filter with 600V voltage rating, 32A current, and -40 to 100°C operating temperature range. Ideal for applications requiring high-potential protection and filtering in industrial settings.
2-1609037-9
TE Connectivity
TE Connectivity's 2-1609037-9 is a SINGLE PHASE EMI FILTER with 250V rated voltage, 6A rated current, and 0.002mA max leakage current. Ideal for EMI mains filtering applications, it operates b/w -10°C to 40°C at 50Hz frequency and mounts on panels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82722A2102N001
TDK
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
B82722A2202N001
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Width (mm): 22.3; Length: 22.7 mm; Terminal Finish: TIN OVER NICKEL;
B82731-M2501-A30
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82722J2102N001
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
B82722J2302N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e3; Packing Method: TRAY; Terminal Finish: TIN; Approvals (V): UL; EN; IEC; VDE;
B82793C0105N265
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Minimum Operating Temperature: -40 Cel; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); Width (mm): 6; Length: 7.1 mm;
B82722-A2102-N1
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 22.7 mm; Width (mm): 22.3; Operating Frequency (Hz): 50Hz; Terminal Finish: TIN OVER NICKEL;
B82722J2202N001
SINGLE PHASE EMI FILTER; Rated Current: 2 A; JESD-609 Code: e3; Height: 25.4 mm; Terminal Finish: TIN; Operating Frequency (Hz): 50/60Hz;
B82732F2901B001
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
B82722A2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Height: 13.3 mm; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; Operating Frequency (Hz): 50/60Hz;
B82722J2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16.1;
B82722-A2302-N1
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Terminal Finish: TIN OVER NICKEL; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): EN; UL; VDE;
B82722A2202N002
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e3; Rated Voltage: 250 V; Height: 13.3 mm;
B82722S0193A041
SINGLE PHASE EMI FILTER; Rated Current: 19 A; Height: 12.7 mm; Length: 27.94 mm; Maximum Operating Temperature: 125 Cel; Mounting Type: SURFACE MOUNT;
B82722A2172N001
SINGLE PHASE EMI FILTER; Rated Current: 1.7 A; Rated Voltage: 250 V; Length: 22.7 mm; Mounting Type: THROUGH HOLE MOUNT; Packing Method: TRAY;
B82722A2301N002
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Terminal Finish: TIN OVER NICKEL; Width (mm): 22.3; JESD-609 Code: e3; Packing Method: TRAY;
B82722A2501N020
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Height: 13.3 mm; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT; Length: 22.7 mm;
B82722A2102N020
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 22.7 mm; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 22.3;
B82722A2152N020
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Height: 13.3 mm; Mounting Type: THROUGH HOLE MOUNT; Packing Method: TRAY; Width (mm): 22.3;
B82722A2252N001
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Rated Voltage: 250 V; Packing Method: TRAY; Terminal Finish: TIN OVER NICKEL; Approvals (V): UL; EN; IEC; VDE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved