Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
Median Price
$2.318
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.178
100+ parts
$0.162
1k+ parts
$0.146
10k+ parts
-
Arrow
$1.679
$1.198
Farnell
$1.820
$1.230
$1.170
Distrelec
$1.988
$1.526
Mouser Electronics
$2.410
$1.630
$1.410
$1.200
DigiKey
$1.627
$1.317
Bürklin Elektronik
$2.540
$2.030
$1.690
Element14
$2.797
$1.638
$1.586
$1.432
Newark
$2.840
$2.140
$2.000
$1.970
Chip1Stop
$5.370
$1.290
$0.836
$0.803
TTI Europe
$1.032
Verical
$2.227
Nova Conductors
$1.881
TME
$2.210
$1.600
$1.470
Vyrian
VNN
ACDS - Activité Composants Distribution Service
Semi Source
Pegasus Components GmbH
Bas Electronics GmbH & Co. KG
Semicontronic
$0.151
$0.147
Ampacity Inc.
Advanced Electronics
Corohmni
$1.729
Argo Parts USA
Netroflash
$1.843
Continental Prestige Electronics
$2.670
$1.380
Aztec Data Supply Inc.
$2.731
GreenTree Electronics
Abacus Technologies
Perfect Parts
Eastek
Assy Fe
With multiple approvals, this EMI mains filter is recognized for meeting international standards.
Suitable for use with standard voltage levels, ensuring compatibility with most applications.
Specifically designed to target and reduce EMI interference in single-phase systems.
The use of tin terminal finish ensures reliable connections for long-term use.
Compact design with a width of 16.1mm allows for easy installation in tight spaces.
Works effectively at both standard frequency levels, making it versatile for various setups.
With a length of 23.3mm, this filter can fit seamlessly into your existing setup.
Packed in a tray for easy handling and organization during storage and transportation.
Through-hole mounting ensures secure placement on circuit boards for stability.
Capable of handling a rated current of 1A, suitable for low to moderate power applications.
The compact height of 25.4mm allows for efficient utilization of space in your system design.
EMI Mains Filters B82722J2102N001 attributes and parameters. Explore more EMI Mains Filters devices from TDK
Approvals (V):
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
Operating Frequency (Hz):
Packing Method:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
B82722J2102N001 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1554216002
Molex
WIRE AND CABLE;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
Transys Electronics
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SCT19XV-150-1R3A006JV
KEMET Corporation
KEMET's SCT19XV-150-1R3A006JV is a SINGLE PHASE EMI FILTER with 1000V voltage rating, 15A current, and -40 to 150°C operating range. Ideal for EMI mains filtering applications due to its high insulation resistance of 100 Mohm. Dimensions: 18.4mm W x 27mm L x 27.5mm H, through-hole mount type.
FN402-1.6-02
Schaffner Holding Ag
Schaffner Holding Ag's FN402-1.6-02 EMI Mains Filter is UL, CSA, and ENEC-14 approved with 250V rated voltage. It features single-phase filter type, 5 terminals, and 1.9A rated current suitable for applications requiring effective electromagnetic interference suppression in a compact design.
RSHN-2006L
TDK
The TDK RSHN-2006L is a single-phase EMI filter with a rated voltage of 250V and a rated current of 6A. It offers approvals from UL, CSA, and EN, making it suitable for various applications requiring EMI mains filtering. With dimensions of 52mm x 98mm x 43.4mm (W x L x H) and operating temperatures ranging from -25°C to 85°C, this panel-mount filter ensures reliable performance in diverse environments.
SU9V-02080
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Terminal Finish: NOT SPECIFIED; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Length: 17 mm;
PLA10AN5521R0R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 300 V; Maximum Operating Temperature: 120 Cel; Additional Features: INDUCTANCE 5.5 MILLI HENRY; STANDARD WINDING TYPE; Height: 17.5 mm;
SS26V-R100330
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 30.5 mm; Terminal Finish: NOT SPECIFIED; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Operating Frequency (Hz): 50Hz;
CMS1-6-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.1 A; Length: 9.4 mm; Mounting Type: SURFACE MOUNT; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel;
SSB11H-R13090
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 343 Cel; Rated Voltage: 250 V;
EAC-10-102
Cosel
EAC-10-102 by Cosel is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 10A, it is suitable for chassis mount applications requiring effective filtering at 60Hz.
SSHB21HS-10145
KEMET SSHB21HS-10145 is a UL approved EMI mains filter with 250V rated voltage and 1A rated current. It offers 100 Mohm min insulation resistance, operates b/w -25°C to 130°C, and has a high pot of 500V. Ideal for single-phase EMI filtering applications due to its compact dimensions (23mm W x 26mm L x 15.5mm H) and through-hole mounting design.
3-123-459
Schurter Ag
3-123-459 by Schurter Ag is a THREE PHASE EMI FILTER with a rated voltage of 520V and rated current of 16A. It has approvals from IEC, UL, VDE for applications requiring EMI mains filtering. With a high pot of 2750V and operating temperatures ranging from -40 to 100 °C, it is suitable for panel mount installations in industrial settings.
810913020112
Wuerth Elektronik & Kg
Wurth Elektronik 810913020112 is a CSA, ENEC-10, IEC, UL, VDE approved SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -25°C to 100°C temperature range and has a high pot of 1075V. Ideal for panel mount applications due to its compact dimensions of 58.5mm x 114.9mm x 45mm.
SC-08-E075J
KEMET Corporation's SC-08-E075J is a UL approved EMI mains filter with 250V rated voltage and 8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot rating of 500V. Ideal for single-phase applications, this filter is mounted through hole and measures 16mm in width by 25mm in length at a height of 25.5mm.
B84142-B16-R
TDK's B84142-B16-R is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 16A rated current. Featuring 2700V high pot and 3.5mA max leakage current, it operates at 50/60Hz frequency. Ideal for panel mounting applications, its compact dimensions of L121.0xB113.0xH61.0mm make it suitable for various electronic devices requiring effective EMI mains filtering.
30AYT6C
The TE Connectivity 30AYT6C is a UL, CSA, and VDE approved THREE PHASE EMI FILTER with insertion loss ranging from 29 dB to 60 dB. Rated for 250V and 30A, it operates at frequencies of 50/60Hz and offers high pot protection up to 1450V. Ideal for panel mounting applications in industrial settings due to its compact dimensions of L351.0xB141.5xH65.0 mm.
10VS1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 2 MHz; Rated Current: 10 A; Length: 84.8 mm; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 40 dB;
B84131-M1-G135
B84131-M1-G135 by TDK is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 35A rated current. It features a three-phase filter type, high pot of 2700V, and max leakage current of 3.5mA. Ideal for panel mount applications in industrial settings due to its compact dimensions of L149xB104xH80mm.
B82722-A2302-N1
TDK's B82722-A2302-N1 is a 250V rated SINGLE PHASE EMI FILTER with 3A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. This through-hole mount filter, measuring 22.7mm x 22.3mm x 13.3mm (LxWxH), is ideal for EMI mains filtering applications.
ESP-03-222-D
The Cosel ESP-03-222-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI mains filter with 250V rated voltage and 3A rated current. It operates b/w -40°C to 85°C, has a high pot of 2500V, and max leakage current of 0.5mA. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
7448031501
Wurth Elektronik 7448031501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 15A current. It operates b/w -40 to 125 °C, suitable for ENEC-10; VDE approved applications requiring EMI mains filtering at 50Hz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82722A2102N001
TDK's B82722A2102N001 is a 1A, 250V UL/EN/IEC/VDE-approved EMI mains filter with single-phase filtering. It features through-hole mounting, tin over nickel terminals, and operates at 50/60Hz. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
B82722A2202N001
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 250 V; Width (mm): 22.3; Length: 22.7 mm; Terminal Finish: TIN OVER NICKEL;
B82731-M2501-A30
SINGLE PHASE EMI FILTER; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier;
B82722J2302N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; JESD-609 Code: e3; Packing Method: TRAY; Terminal Finish: TIN; Approvals (V): UL; EN; IEC; VDE;
B82793C0105N265
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Minimum Operating Temperature: -40 Cel; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); Width (mm): 6; Length: 7.1 mm;
B82722-A2102-N1
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 22.7 mm; Width (mm): 22.3; Operating Frequency (Hz): 50Hz; Terminal Finish: TIN OVER NICKEL;
B82722J2202N001
SINGLE PHASE EMI FILTER; Rated Current: 2 A; JESD-609 Code: e3; Height: 25.4 mm; Terminal Finish: TIN; Operating Frequency (Hz): 50/60Hz;
B82732F2901B001
TDK's B82732F2901B001 is a UL, VDE, EN approved EMI mains filter with 250V rated voltage and 0.9A current. This single-phase filter operates at 50/60Hz frequency, through-hole mount type, measuring L24.5xB14.5xH13.5mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
B82722A2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Height: 13.3 mm; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; Operating Frequency (Hz): 50/60Hz;
B82722J2301N001
SINGLE PHASE EMI FILTER; Rated Current: .3 A; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16.1;
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Terminal Finish: TIN OVER NICKEL; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): EN; UL; VDE;
B82722A2202N002
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e3; Rated Voltage: 250 V; Height: 13.3 mm;
B82722A2302N001
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Terminal Finish: TIN OVER NICKEL; Packing Method: TRAY; JESD-609 Code: e3;
B82722S0193A041
SINGLE PHASE EMI FILTER; Rated Current: 19 A; Height: 12.7 mm; Length: 27.94 mm; Maximum Operating Temperature: 125 Cel; Mounting Type: SURFACE MOUNT;
B82722J2102N020
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 23.3 mm; Operating Frequency (Hz): 50/60Hz; JESD-609 Code: e3;
B82722J2152N020
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Length: 23.3 mm; Approvals (V): UL; EN; IEC; VDE; Width (mm): 16.1; Packing Method: TRAY;
B82722J2172N001
SINGLE PHASE EMI FILTER; Rated Current: 1.7 A; Approvals (V): UL; EN; IEC; VDE; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 16.1;
B82722J2132N001
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Approvals (V): UL; EN; IEC; VDE; Terminal Finish: TIN OVER NICKEL; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz;
B82722J2202N020
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Approvals (V): UL; EN; IEC; VDE; Rated Voltage: 250 V; Height: 25.4 mm; JESD-609 Code: e3;
B82722J2501N001
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Mounting Type: THROUGH HOLE MOUNT; Approvals (V): UL; EN; IEC; VDE; Height: 25.4 mm; Operating Frequency (Hz): 50/60Hz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved