Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
810912010112 by Wurth Elektronik is a SINGLE PHASE EMI FILTER with a rated voltage of 250V and rated current of 10A. It has approvals from CSA, ENEC-10, IEC, UL, VDE and operates at temperatures ranging from -25°C to 100°C. Ideal for PANEL MOUNT applications requiring effective EMI mains filtering in various electronic systems.
Median Price
$18.840
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
< 1k
Farnell
1+ parts
$15.810
100+ parts
$12.580
1k+ parts
-
10k+ parts
Distrelec
$18.000
Bürklin Elektronik
$18.640
$12.450
DigiKey
$19.040
$15.472
Mouser Electronics
$20.540
$17.570
Newark
$25.530
$22.330
Argo Parts USA
This product has multiple approvals from well-known organizations, ensuring high quality and reliability.
Suitable for a wide range of applications requiring a voltage rating of 250 V.
Designed specifically to filter out electromagnetic interference in single-phase systems, ensuring clean power supply.
Can operate effectively at high temperatures, making it suitable for various industrial environments.
Capable of functioning even in low-temperature conditions, providing versatility in usage.
Compact size allows for easy installation in tight spaces.
Compatible with standard AC power frequencies, ensuring seamless integration.
Optimal length for efficient filtration and space-saving design.
Capable of withstanding high potential differences, enhancing safety and durability.
Secure packaging method for easy handling and transportation.
Convenient mounting option for easy installation on panels or enclosures.
Suitable for applications requiring a maximum current rating of 10 A.
Low profile design for space-efficient installation.
EMI Mains Filters 810912010112 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Approvals (V):
Filter Type:
Height:
High Pot:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Hy Electronic
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Kec
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Taitron Components
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Rugao Dachang Electronic
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
RSHN-2006
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Operating Frequency (Hz): 60Hz; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel; High Pot: 2500 V;
SSR21NV-M18164
KEMET Corporation
SSR21NV-M18164 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage, 1.8A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C, suitable for single-phase applications requiring high pot of 500V. Dimensions are L22.0xB16.0xH27.0 mm for through-hole mounting in various electronic devices.
10510
Murrelektronik
10510 by Murrelektronik is a THREE PHASE EMI FILTER with a rated voltage of 440 V and a rated current of 3 A. It has a compact design, measuring 39 mm in width, 65 mm in length, and 107 mm in height. This filter is suitable for DIN RAIL MOUNT installation and is approved for use according to EN standards.
6ET1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 6 A; Minimum Frequency: .01 MHz; Manufacturer Series: T; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
3-103-983
Schurter Ag
Schurter Ag's 3-103-983 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
SS11V-06180-CH
SS11V-06180-CH by KEMET is a SINGLE PHASE EMI FILTER with 250V rated voltage, 0.6A rated current, and 100 Mohm min insulation resistance. It operates b/w -25°C to 120°C, has dimensions of L22.0xB14.5xH21.5 mm, and withstands high pot testing up to 500V. Ideal for EMI mains filtering applications with through hole mounting requirements.
5500.2025
The Schurter Ag 5500.2025 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V and rated current of 16A. It operates b/w -25°C to 100°C, has high pot of 2700V, and max leakage current of 0.5mA. This single-phase filter with through-hole mount is ideal for applications requiring effective electromagnetic interference suppression.
250APH12P
TE Connectivity
The TE Connectivity 250APH12P is a UL-approved EMI mains filter with a rated voltage of 690V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, with high pot up to 2640V and max leakage current of 330mA. Ideal for panel mounting applications, it measures 160mm in width, 250mm in length, and stands at a height of 125mm.
CMS2-2-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 4.4 A; Width (mm): 8.89; Maximum Operating Temperature: 160 Cel; Length: 8.89 mm; Minimum Operating Temperature: -40 Cel;
FN2090-10-06
Schaffner Holding Ag
FN2090-10-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 11.2A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. Ideal for panel mounting applications with dimensions of L94.0xB56.0xH45.4mm.
7448680100
Wuerth Elektronik & Kg
Wurth Elektronik 7448680100 is a SINGLE PHASE EMI FILTER with 250V rating, 9.5A current, and -40 to 60°C operating temperature range. Ideal for IEC-approved applications requiring EMI mains filtering in through-hole mounting setups.
20VSK6
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Length: 113.3 mm; Rated Voltage: 120 V; Insertion Loss At Maximum Frequency: 48 dB;
6VV1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Minimum Frequency: 15 dB; Maximum Leakage Current: .5 mA;
SS26V-R100330
KEMET Corporation's SS26V-R100330 EMI Mains Filter is UL approved with 250V rated voltage and 1A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L26.0xB20.5xH30.5 mm. Ideal for single-phase EMI filtering applications in various electronic devices.
SC-06-10JS
KEMET Corporation's SC-06-10JS is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 105°C, and measures 26mm x 29mm x 12mm. Ideal for EMI mains filtering applications with through hole mounting.
SU9VF-02100
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
UF1717V-300Y1R2-03
TDK
UF1717V-300Y1R2-03 by TDK is a single-phase EMI mains filter with 4 terminals and rated voltage of 280V. It offers a min insulation resistance of 100 Mohm, operates at temperatures from -20 to 120 °C, and has UL, CSA, IEC approvals. Ideal for applications requiring noise suppression in electrical systems.
6609046-7
TE Connectivity's 6609046-7 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
SCT19XV-150-1R3A006JV
KEMET's SCT19XV-150-1R3A006JV is a SINGLE PHASE EMI FILTER with 1000V voltage rating, 15A current, and -40 to 150°C operating range. Ideal for EMI mains filtering applications due to its high insulation resistance of 100 Mohm. Dimensions: 18.4mm W x 27mm L x 27.5mm H, through-hole mount type.
RN102-1-02-3M0
RN102-1-02-3M0 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L14.0xB14.0xH9.0 mm, it is designed for through-hole mounting in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
810913020112
Wurth Elektronik
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Width (mm): 58.5; Packing Method: TRAY; Minimum Operating Temperature: -25 Cel; Approvals (V): CSA; ENEC-10; IEC; UL; VDE;
810913020
Wurth Elektronik's 810913020 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A current. It operates b/w -25°C to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
810913010112
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): CSA; EN; IEC; UL; VDE; ENEC-10; Mounting Type: PANEL MOUNT; Height: 45 mm; Operating Frequency (Hz): 50/60Hz;
810911001
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Maximum Leakage Current: .173 mA; Operating Frequency (Hz): 50/60Hz; High Pot: 1075 V; Width (mm): 35;
810911010
SINGLE PHASE EMI FILTER; Rated Current: 10 A; High Pot: 1075 V; Width (mm): 35; Maximum Leakage Current: .534 mA; Length: 43.5 mm;
810912006
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Minimum Operating Temperature: -25 Cel; Width (mm): 51.2; High Pot: 1075 V; Mounting Type: PANEL MOUNT;
810912010
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Length: 51.8 mm; Operating Frequency (Hz): 50/60Hz; Mounting Type: PANEL MOUNT; Rated Voltage: 250 V;
810913010
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Width (mm): 58.5; Approvals (V): CSA; EN; IEC; UL; VDE; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz;
810911001112
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Rated Voltage: 250 V; Height: 29 mm; Operating Frequency (Hz): 50-60; Packing Method: TRAY;
810911003112
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; High Pot: 1075 V; Length: 64 mm; Packing Method: TRAY;
810912020112
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Mounting Type: PANEL MOUNT; High Pot: 1075 V; Width (mm): 51.8; Length: 75 mm;
810912001112
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Approvals (V): CSA; ENEC-10; IEC; UL; VDE; Length: 75 mm; Minimum Operating Temperature: -25 Cel; Height: 29 mm;
810911008112
SINGLE PHASE EMI FILTER; Rated Current: 8 A; Packing Method: TRAY; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel; Approvals (V): CSA; ENEC-10; IEC; UL; VDE;
810912006112
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Packing Method: TRAY; Mounting Type: PANEL MOUNT; Width (mm): 51.8; Height: 29 mm;
810912012112
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50-60; Approvals (V): CSA; ENEC-10 ; IEC; UL; VDE; Maximum Operating Temperature: 100 Cel; Rated Voltage: 250 V;
810911006112
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Height: 29 mm; Approvals (V): CSA; ENEC-10; IEC; UL; VDE; Packing Method: TRAY; Minimum Operating Temperature: -25 Cel;
810912008112
SINGLE PHASE EMI FILTER; Rated Current: 8 A; Operating Frequency (Hz): 50-60; Rated Voltage: 250 V; Maximum Leakage Current: 0 mA; Approvals (V): CSA; ENEC-10; IEC; UL; UR; VDE;
810912014112
SINGLE PHASE EMI FILTER; Rated Current: 14 A; Maximum Leakage Current: 0 mA; Approvals (V): CSA; ENEC-10; IEC; UL; VDE; Maximum Operating Temperature: 100 Cel; Packing Method: TRAY;
810912003112
SINGLE PHASE EMI FILTER; Rated Current: 3 A; High Pot: 1075 V; Height: 29 mm; Maximum Operating Temperature: 100 Cel; Mounting Type: PANEL MOUNT;
810911010112
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Rated Voltage: 250 V; Approvals (V): CSA; ENEC-10; IEC; UL; VDE; Packing Method: TRAY; High Pot: 1075 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved