Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FN2090-10-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 11.2A rated current. It operates at temperatures from -25 to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. Ideal for panel mounting applications with dimensions of L94.0xB56.0xH45.4mm.
Median Price
$41.410
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$25.230
100+ parts
-
1k+ parts
10k+ parts
Farnell
$35.140
$27.390
RS Americas
$37.000
Sager
$39.320
$36.520
Mouser Electronics
$48.090
$38.780
DigiKey
$49.390
$32.889
$31.837
Interstate Connecting
$49.941
$41.081
Heilind Electronics
$50.401
$40.150
Newark
$62.260
$43.560
$39.650
Element14
$62.570
$50.840
Verical
$36.200
TTI Europe
$37.112
Arrow
$31.441
Distrelec
Powertech Controls
$36.730
Schukat
$39.834
$29.646
Vyrian
IBS Electronics
$43.538
$40.853
Nova Conductors
Aztec Data Supply Inc.
$0.569
Corohmni
$2.591
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
Aranea Global
EMSNET (Excess)
Authorized Procurement Solutions
Having multiple approvals ensures that the product meets various safety and quality standards, making it a reliable choice for use.
With a high rated voltage, this EMI mains filter can effectively handle power supply fluctuations and surges, providing stable performance.
Single phase EMI filters are efficient in reducing electromagnetic interference, ensuring smooth operation of connected devices.
The high maximum operating temperature allows this EMI mains filter to function effectively even in challenging environments without overheating.
The low minimum operating temperature ensures that this filter can still operate reliably in colder conditions, making it versatile for various applications.
The compact width makes this EMI mains filter suitable for installations where space is limited, providing flexibility in mounting options.
Support for common operating frequencies ensures compatibility with a wide range of electrical systems, making it a versatile choice for different applications.
The standard length allows for easy integration into existing power systems, ensuring seamless connectivity and installation.
The high withstand voltage capability ensures protection against voltage spikes and surges, enhancing the reliability and safety of connected equipment.
Low leakage current reduces the risk of electrical hazards and ensures efficient filtering of EMI interference, maintaining the integrity of connected devices.
Panel mounting makes installation easy and secure, allowing the EMI mains filter to be conveniently integrated into industrial or commercial equipment.
The compact dimensions make this filter suitable for a variety of applications, providing flexibility in installation and space-saving benefits.
With a high rated current capacity, this EMI mains filter can handle heavy loads and high power requirements, ensuring reliable performance in demanding conditions.
The moderate height allows for easy integration into enclosures or mounting positions, providing versatility in installation options.
EMI Mains Filters FN2090-10-06 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Design/Specification - UKCA Design 28/Jun/2021
PCN Packaging - Mult Devs - packing material chg 29/SEP/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Unitrode
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Shenzhen Yixinsemi Electronics
Harris Semiconductor
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
FN2415-6-29
Schaffner Holding Ag
Schaffner Holding Ag's FN2415-6-29 is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6A current. Operating at -25 to 100°C, it offers high pot of 1100V and max leakage current of 9.4mA. Ideal for panel mounting applications with dimensions L94.0xB56.0xH45.4mm, this filter operates at 60Hz frequency for effective EMI suppression.
FN351H-50-33
Schaffner Holding Ag's FN351H-50-33 is a 3-phase EMI filter with approvals from CSA and ENEC-14. It has a rated voltage of 520V, rated current of 57.7A, and operates at temperatures ranging from -25°C to 100°C. This panel mount filter is designed for applications requiring effective electromagnetic interference suppression in industrial settings.
FHSAA10A1FR
Xp Power
XP Power's FHSAA10A1FR is a 250V single-phase EMI filter with 10A rated current. It operates b/w -40°C to 110°C, approved by EN and UL standards. Ideal for chassis mount applications requiring effective filtering at 400Hz frequency.
6EHT3
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .15 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Maximum Leakage Current: .002 mA; Insertion Loss At Minimum Frequency: 16 dB;
RSEL-2003W
TDK
The TDK RSEL-2003W is a single-phase EMI mains filter with 250V rated voltage and 3A rated current. It offers approvals from UL, CSA, and EN, with a max operating temperature of 85°C. Ideal for chassis mounting applications requiring effective filtering at 60Hz frequency.
60AYT6C
TE Connectivity
The TE Connectivity 60AYT6C is a UL, CSA, VDE approved EMI mains filter with insertion loss of 12 dB at min frequency and 45 dB at max frequency. It operates at 50/60Hz, rated for 250V and has a rated current of 60A. Ideal for three-phase EMI filtering in applications requiring high voltage protection up to 1450V.
6609032-9
TE Connectivity's 6609032-9 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at 0.15 MHz and 65 dB at 10 MHz. With a rated voltage of 250V and rated current of 5A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
6609066-3
TE Connectivity's 6609066-3 EMI Mains Filter is a THREE PHASE filter with 440V rated voltage, 10A rated current, and 3mA max leakage current. Ideal for panel mounting applications in environments with -10 to 40°C temperature range and 50Hz operating frequency.
6VV1
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Minimum Frequency: 15 dB; Maximum Leakage Current: .5 mA;
CMS1-7-R
Eaton Corporation
Eaton Corporation's CMS1-7-R is a UL-approved EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 2.6A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
810913020
Wuerth Elektronik & Kg
Wurth Elektronik's 810913020 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A current. It operates b/w -25°C to 100°C, approved by CSA, EN, IEC, UL, VDE for applications requiring EMI mains filtering in various industries.
SC-02-20G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Diameter (mm): 17.5; Dimensions: D17.5XH14.0 (mm)/D0.689XH0.551 (inch); Height: 14 mm;
B82722A2301N001
The TDK B82722A2301N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, 50/60Hz operating frequency, and tin over nickel terminal finish. Ideal for applications requiring effective electromagnetic interference suppression in electronic devices.
SN8D-500
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -25 Cel; Height: 13 mm; Diameter (mm): 17;
PS0S0DH6A
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
SC-05-10J
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Width (mm): 20.0; No. of Terminals: 4; Height: 27 mm; Rated Voltage: 250 V;
NAC-10-102-D
Cosel
Cosel NAC-10-102-D is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 10A rated current. It operates b/w -40°C to 85°C, offering single-phase filtering at 60Hz frequency. Ideal for DIN rail mounting applications due to compact dimensions of L92.0xB53.0xH41.0mm.
30AYP6C
THREE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 30 A; Dimensions: L224XB141.5XH65 (mm)/L8.82XB5.57XH2.56 (inch); Approvals (V): UL; CSA; VDE; Rated Voltage: 250 V;
FN2090-20-06
The Schaffner Holding Ag FN2090-20-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 22.4A. It operates at temperatures from -25°C to 100°C, has dimensions of L94.0xB56.0xH45.4 (mm), and is ideal for panel mount applications requiring effective EMI filtering at 50/60Hz frequencies.
FN3025HL-20-71
Schaffner Holding Ag's FN3025HL-20-71 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 520V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 0.4mA, and a rated current of 20A. This three-phase filter is mounted on DIN rail for applications requiring effective EMI filtering in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
FN2030-10-06
FN2030-10-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 11.2A, and high pot of 1100V. This chassis mount filter operates b/w -25°C to 100°C and is ideal for applications requiring effective electromagnetic interference mains filtering.
FN2030-6-06
FN2030-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C and has a compact size of L50.5xB44.5xH22.3 mm, making it ideal for chassis mount applications requiring effective electromagnetic interference suppression.
FN2030-4-06
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Height: 22.3 mm; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V; Operating Frequency (Hz): 50/60Hz;
FN2030-30-08
FN2030-30-08 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 33.5A rated current. With a compact size of L64.8xB49.8xH40.3 mm, it's ideal for chassis mount applications in environments ranging from -25°C to 100°C while offering high pot protection up to 1100V.
FN2030-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.1 A; High Pot: 1100 V; Approvals (V): UL; CSA; ENEC-14; Maximum Leakage Current: .34 mA; Additional Features: INDUCTANCE 20 MILLIHENRY;
FN2020-16-06
SINGLE PHASE EMI FILTER; Rated Current: 18.4 A; Length: 50.5 mm; Dimensions: L50.5XB44.5XH29.3 (mm)/L1.988XB1.752XH1.154 (inch); Height: 29.3 mm; Rated Voltage: 250 V;
FN2090-6-06
FN2090-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.67mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
FN2020-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Maximum Leakage Current: .74 mA; Length: 43.5 mm; Operating Frequency (Hz): 50/60Hz; Additional Features: INDUCTANCE 2.5 MILLIHENRY;
FN2010-6-06
SINGLE PHASE EMI FILTER; Rated Current: 6.9 A; High Pot: 2000 V; Additional Features: INDUCTANCE 1 MILLIHENRY; Length: 43.5 mm; Maximum Leakage Current: .66 mA;
FN2030-20-06
The Schaffner FN2030-20-06 is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, and ENEC-14. With dimensions of L64.8XB49.8XH40.3 (mm), it is suitable for chassis mount applications requiring effective filtering at frequencies of 50/60Hz.
FN2010-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.45 A; Operating Frequency (Hz): 50/60Hz; Maximum Operating Temperature: 100 Cel; Length: 43.5 mm; Height: 24.3 mm;
FN2070-3-06
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Height: 40.3 mm; Additional Features: INDUCTANCE 9.8 MILLIHENRY; Maximum Operating Temperature: 100 Cel; Length: 64.8 mm;
FN2020-1-06
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Maximum Operating Temperature: 100 Cel; High Pot: 2000 V; Height: 29.3 mm; Length: 43.5 mm;
FN2020B-20-06
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Maximum Operating Temperature: 100 Cel; Width (mm): 49.8; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz;
FN2010-12-06
SINGLE PHASE EMI FILTER; Rated Current: 13.8 A; Minimum Operating Temperature: -25 Cel; Maximum Leakage Current: .74 mA; Approvals (V): UL; CSA; ENEC-14; High Pot: 2000 V;
FN2020-20-08
SINGLE PHASE EMI FILTER; Rated Current: 23 A; Additional Features: INDUCTANCE 0.6 MILLIHENRY; Height: 30.3 mm; Approvals (V): UL; CSA; ENEC-14; Mounting Type: CHASSIS MOUNT;
FN2020A-20-06
The Schaffner Holding Ag FN2020A-20-06 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 23A rated current. It has approvals from UL, CSA, and ENEC-14. This chassis mount filter operates at temperatures ranging from -25°C to 100°C, making it ideal for applications requiring effective electromagnetic interference suppression.
FN2070-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; CSA; ENEC-14;
FN2080-10-06
SINGLE PHASE EMI FILTER; Rated Current: 11.5 A; Height: 45.4 mm; Width (mm): 56.0; Dimensions: L130.5XB56.0XH45.4 (mm)/L5.138XB2.205XH1.787 (inch); Additional Features: INDUCTANCE 4.5 MILLIHENRY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved