Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's FN700Z-6-06 is a 3-phase EMI filter with approvals from UL, CSA, EN. Rated for 250V and 6.9A, it operates at -25 to 85°C. Ideal for panel mounting in applications requiring high pot of 590V and max leakage current of 0.44mA.
Median Price
$563.045
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$444.610
100+ parts
$400.150
1k+ parts
-
10k+ parts
Farnell
$449.140
RS Americas
$497.300
Mouser Electronics
$562.520
$558.780
DigiKey
$563.570
$488.925
Verical
$642.213
Newark
$679.550
$625.190
RS (Exports)
$797.930
Master Electronics
Electro Sonic
$508.830
Nova Conductors
$606.515
IBS Electronics
$715.168
Vyrian
AZTECH Wire
$8.011
Allen Electronics Distributors
$513.330
Continental Prestige Electronics
$594.385
Netroflash
$576.189
$564.059
Argo Parts USA
$600.450
$588.320
Neutron USA
$1,464.990
Having approvals from UL, CSA, and EN ensures that the product meets international safety standards and regulations.
The high rated voltage of 250 V allows for efficient filtering of EMI in three-phase systems.
Being a three-phase EMI filter means that it can effectively reduce electromagnetic interference in multi-phase electrical systems.
With a maximum operating temperature of 85°C, this filter can withstand high temperatures without compromising its performance.
The low minimum operating temperature of -25°C ensures that the filter can function effectively in a wide range of environments.
The compact width of 80.0mm allows for easy installation in various applications.
The filter supports the standard operating frequencies of 50/60Hz, making it compatible with most electrical systems.
The length of 200 mm provides sufficient filtering capacity for three-phase systems.
The high pot rating of 590 V ensures that the filter can handle high voltage surges without damage.
The low maximum leakage current of 0.44 mA indicates the efficiency of the filter in reducing EMI leakage.
The panel mount design allows for easy and secure installation on electrical panels.
The compact dimensions make this filter suitable for space-constrained applications while maintaining efficient EMI filtering.
With a rated current of 6.9 A, this filter can handle high current loads in three-phase systems.
The height of 50 mm allows for easy integration into existing electrical setups without taking up too much space.
EMI Mains Filters FN700Z-6-06 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Design/Specification - UKCA Design 28/Jun/2021
PCN Assembly/Origin - COO Change 20/May/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SC-08-E075J
KEMET Corporation
KEMET Corporation's SC-08-E075J is a UL approved EMI mains filter with 250V rated voltage and 8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has a high pot rating of 500V. Ideal for single-phase applications, this filter is mounted through hole and measures 16mm in width by 25mm in length at a height of 25.5mm.
SCR47B-350-S2R0B010J
KEMET's SCR47B-350-S2R0B010J EMI Mains Filter has 100 Mohm Min Insulation Resistance, 500 V High Pot, and 35 A Rated Current. Ideal for THREE PHASE applications with UL approval, operating b/w -25 to 120 °C in a Through Hole Mount setup.
10VR6
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .4 mA; Minimum Frequency: .15 MHz; Approvals (V): UL; CSA; VDE;
B84111A0000A030
TDK
TDK's B84111A0000A030 is a 250V UL/CSA/ENEC-10 approved single-phase EMI mains filter with 3A rated current. With dimensions of L50xB45xH22.3 mm, it offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications at 50/60Hz operating frequency.
JAC-10-103-D
Cosel
JAC-10-103-D by Cosel is a 3-phase EMI filter with UL and CSA approvals. It has a rated voltage of 500V, rated current of 10A, and max leakage current of 1mA. Ideal for industrial applications requiring efficient EMI mains filtering in a compact DIN rail mount design.
10EK3
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 10 A; Height: 29.5 mm; Manufacturer Series: K; Dimensions: L71.4XB52.6XH29.5 (mm)/L2.81XB2.07XH1.16 (inch);
B84112G0000B030
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
03DBAW5
Delta Electronics
Delta Electronics' 03DBAW5 EMI Mains Filter offers UL, CSA, VDE approvals with insertion loss of 15 dB at 0.15-30 MHz range. Rated for 250V and 3A, it is a single-phase filter ideal for panel mounting applications requiring high pot of 2250V.
RN114-1.5-02-6M8
Schaffner Holding Ag
Schaffner Holding Ag's RN114-1.5-02-6M8 EMI Mains Filter is UL, IEC, VDE, ENEC-10 approved with 300V rating and 1.5A current. It operates b/w -40°C to 100°C at 50/60Hz frequency. Ideal for single-phase EMI filtering applications due to its compact dimensions of L22.5xB21.5xH13.2mm and through-hole mounting design.
B82722-A2302-N1
TDK's B82722-A2302-N1 is a 250V rated SINGLE PHASE EMI FILTER with 3A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. This through-hole mount filter, measuring 22.7mm x 22.3mm x 13.3mm (LxWxH), is ideal for EMI mains filtering applications.
SS11VL-R07190
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .7 A; Terminal Finish: NOT SPECIFIED; Rated Voltage: 250 V; Length: 22 mm; Additional Features: INDUCTANCE 19 MILLIHENRY;
B84112G0000B116
SINGLE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CUL; ENEC-10; Height: 29 mm; Maximum Leakage Current: .5 mA; Length: 63 mm;
SC-35-D010JH
KEMET SC-35-D010JH EMI Mains Filter rated at 250V, 35A with UL approval. Features single-phase filter type, -25 to 120°C operating temp range. Ideal for noise suppression in electronic equipment.
RSEL-2003W
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 20 mm; Mounting Type: PANEL MOUNT;
SN8D-500
KEMET Corporation's SN8D-500 is a SINGLE PHASE EMI FILTER with 2A rated current, operating from -25 to 105°C. Measuring 17mm in diameter and 13mm in height, it is designed for EMI mains filtering applications using through hole mounting method.
744841330
Wuerth Elektronik & Kg
744841330 by Wurth Elektronik is a single-phase EMI filter with a rated voltage of 250V and a max operating temperature of 125°C. It is approved by ENEC-10, IEC, and VDE. This filter is suitable for applications requiring noise suppression in mains power systems.
FN2020-1-06
Schaffner Holding Ag's FN2020-1-06 is a UL, CSA, ENEC-14 approved 250V single-phase EMI filter with 100°C max temp and -25°C min temp. It operates at 50/60Hz frequency, has a rated current of 1.15A, and offers high pot protection up to 2000V. Ideal for chassis mount applications due to its compact dimensions of L43.5xB32.5xH29.3mm.
SS30V-R180190
KEMET Corporation's SS30V-R180190 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and max operating temperature of 120°C. With a rated current of 1.8A, it is designed for through-hole mounting applications where EMI filtering is required to ensure optimal performance and reliability in electronic systems.
PBF-1206-22
The TDK-Lambda PBF-1206-22 is a UL, VDE, CSA, EN approved EMI mains filter with 250V rated voltage and 6A rated current. With a single-phase filter type and max operating temperature of 85°C, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
CMS2-2-R
Eaton Corporation
Eaton Corporation's CMS2-2-R EMI Mains Filter is UL approved with 4 terminals, rated at 4.4A. It operates b/w -40°C to 160°C, ideal for single-phase applications requiring surface mount installation in compact spaces. Dimensions: L8.89xB8.89xH6.0 mm, it features tin terminal finish and comes in tape and reel packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN700Z-10-06
THREE PHASE EMI FILTER; Rated Current: 11.6 A; Mounting Type: PANEL MOUNT; Operating Frequency (Hz): 50/60Hz; Maximum Leakage Current: .44 mA; High Pot: 590 V;
FN700Z-20-03
THREE PHASE EMI FILTER; Rated Current: 23 A; Width (mm): 110.0; Dimensions: L275.0XB110.0XH50.0 (mm)/L10.827XB4.331XH1.969 (inch); Maximum Leakage Current: 2.6 mA; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved