Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 1.65 A; Width (mm): 7.2; Length: 9.4 mm; Minimum Operating Temperature: -40 Cel; Packing Method: TAPE AND REEL;
Median Price
$2.062
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$1.660
100+ parts
$1.582
1k+ parts
$1.530
10k+ parts
-
Mouser Electronics
$2.870
$1.950
$1.800
$1.680
DigiKey
$1.941
$1.792
Master Electronics
$1.730
$1.620
Verical
$2.016
Forefront Electronics and Design
$4.900
NAC Semi
$3.080
Electro Sonic
$1.900
$1.630
$1.470
IBS Electronics
$2.300
$2.216
Vyrian
Nova Conductors
A2Z Electronics, Inc.
Bristol Electronics
Semicontronic
$1.160
$1.131
$1.125
Aztec Data Supply Inc.
$2.296
Ampacity Inc.
$2.530
Corohmni
$2.669
Metaverse IC Inc.
Perfect Parts
Continental Prestige Electronics
Authorized Procurement Solutions
Argo Parts USA
Bastille Electronics
EMI Mains Filters CMS1-10-R attributes and parameters. Explore more EMI Mains Filters devices from Cooper Electronic Technologies
Additional Features:
Approvals (V):
Filter Type:
Height:
Length:
Manufacturer Series:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Width (mm):
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Lite-on Semiconductor
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
NEF1-10-2788977
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): UL; IEC; VDE; Rated Voltage: 250 V; Minimum Operating Temperature: -25 Cel;
FN2030-6-06
Schaffner Holding Ag
FN2030-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI filter with 250V rated voltage and 6.7A rated current. It operates at temperatures from -25°C to 100°C and has a compact size of L50.5xB44.5xH22.3 mm, making it ideal for chassis mount applications requiring effective electromagnetic interference suppression.
CMS1-6-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.1 A; Length: 9.4 mm; Mounting Type: SURFACE MOUNT; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel;
FN2010-20-06
FN2010-20-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 23A rated current. It operates at temperatures from -25 to 100°C and has a max leakage current of 0.74mA. Ideal for panel mounting applications due to its compact dimensions of L64.8xB49.8xH30.3mm.
FMBC-A91G-J310
Schurter Ag
Schurter Ag's FMBC-A91G-J310 is a UL, CUL, VDE approved EMI mains filter with 480V rated voltage. It offers 130A rated current and operates at -25 to 100°C. Ideal for three-phase applications, it has a compact size of L240.0xB90.0xH150.0mm for panel mounting in industrial settings.
B84110A0000A010
TDK
TDK B84110A0000A010 is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 1A rated current. Featuring TIN terminal finish and 2700V high pot, it operates at 50/60Hz frequency. Ideal for through-hole mounting in applications requiring max leakage current of 0.5mA.
10VK1
The TE Connectivity 10VK1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 6 dB at min frequency and 50 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
RSHN-2006
RSHN-2006 by TDK is a single-phase EMI filter with 250V rated voltage and 6A rated current. It offers approvals from UL, CSA, EN and operates b/w -25°C to 85°C. With a width of 52mm and height of 35mm, it is ideal for panel mount applications requiring high insulation resistance (100 Mohm).
RN214-0.3-02-47M
The Schaffner Holding Ag RN214-0.3-02-47M is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 0.3A current. It operates b/w -40 to 100°C, suitable for single-phase applications at 50/60Hz frequency. Dimensions are L23.0xB15.5xH25.0mm for through-hole mounting in various electronic devices.
P3215-AL
Coilcraft
Coilcraft's P3215-AL EMI Mains Filter is a single-phase filter with 4 terminals. It has UL approval and can handle up to 3.2A current. With dimensions of L31.8xB15.88xH31.2 mm, it is ideal for applications requiring EMI filtering in electronic devices operating b/w -40°C to 85°C temperature range.
1000APS12L
TE Connectivity's 1000APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a max operating temperature of 50°C and rated current of 1000A. Ideal for panel mounting applications, this filter offers high pot protection up to 2200V and max leakage current of 270mA.
PLA10AN1030R7R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN1030R7R2B is a SINGLE PHASE EMI FILTER with 100 Mohm Min. Insulation Resistance, 300 V Rated Voltage, and 0.7 A Rated Current. It operates b/w -25 to 120 °C and is ideal for EMI mains filtering applications due to its Through Hole Mounting type and compact dimensions of L18.0xB16.0xH17.5 mm.
SCF25XV-240-2R0A006JH
SINGLE PHASE EMI FILTER;
SCF20-05-1100
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Width (mm): 15.5; Maximum Operating Temperature: 50 Cel; Height: 25 mm; No. of Terminals: 4;
10511
Murrelektronik
10511 by Murrelektronik is a CE and EN approved EMI mains filter with a rated voltage of 440V. Featuring a three-phase filter type, it operates at temperatures ranging from -25°C to 85°C. With a rated current of 6A, this panel mount filter is ideal for industrial applications requiring high-potential protection.
FN402-1.6-02
Schaffner Holding Ag's FN402-1.6-02 EMI Mains Filter is UL, CSA, and ENEC-14 approved with 250V rated voltage. It features single-phase filter type, 5 terminals, and 1.9A rated current suitable for applications requiring effective electromagnetic interference suppression in a compact design.
RD8127-16-12M0
DATA LINE FILTER;
SC-07-30JM
KEMET Corporation's SC-07-30JM is a UL-approved EMI mains filter with 100 Mohm insulation resistance, 250V rated voltage, and 7A current. This single-phase filter operates b/w -25°C to 120°C and has a high pot of 500V. Ideal for through-hole mounting applications requiring effective electromagnetic interference suppression in compact spaces.
SCF47B-400-1R8C040J
KEMET Corporation's SCF47B-400-1R8C040J is a UL-approved EMI mains filter with 500V rated voltage and 40A rated current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for single-phase applications, this filter is mounted through hole and comes in a 70mm length tray packing.
B84143A0008R105
TDK B84143A0008R105 is a 520V UL/ENEC-10 approved EMI mains filter with 6 terminals. It offers 8A rated current, 2720V high pot, and 13mA max leakage current. Ideal for three-phase EMI filtering applications due to its compact dimensions of L133.7xB51.4xH63.0mm and panel mount design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CMS1-11-R
Eaton Corporation
SINGLE PHASE EMI FILTER; Rated Current: 1.35 A; Height: 2.6 mm; Minimum Operating Temperature: -40 Cel; Length: 9.4 mm; No. of Terminals: 4;
SINGLE PHASE EMI FILTER; Rated Current: 1.35 A; Width (mm): 7.2; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel; Additional Features: INDUCTANCE 100 MICRO HENRY;
CMS1-10-R
SINGLE PHASE EMI FILTER; Rated Current: 1.65 A; Maximum Operating Temperature: 160 Cel; Dimensions: L9.4XB7.2XH2.6 (mm)/L0.37XB0.283XH0.102 (inch); Width (mm): 7.2; Length: 9.4 mm;
CMS1-1-R
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 2.6 mm; Dimensions: L9.4XB7.2XH2.6 (mm); Length: 9.4 mm; Width (mm): 7.2;
Eaton Corporation's CMS1-1-R EMI Mains Filter is a UL approved single-phase filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 7A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
CMS1-5-R
Eaton Corporation's CMS1-5-R EMI Mains Filter is a single-phase filter with 4 terminals, UL approval, and rated current of 3.6A. With dimensions of L9.4xB7.2xH2.6 mm, it operates b/w -40°C to 160°C and is ideal for surface mount applications in electronic devices.
SINGLE PHASE EMI FILTER; Rated Current: 3.6 A; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; Height: 2.6 mm;
CMS1-14-R
SINGLE PHASE EMI FILTER; Rated Current: .85 A; Additional Features: INDUCTANCE 205 MICRO HENRY; Approvals (V): UL; Height: 2.6 mm; Maximum Operating Temperature: 160 Cel;
SINGLE PHASE EMI FILTER; Rated Current: .85 A; Dimensions: L9.4XB7.2XH2.6 (mm)/L0.37XB0.283XH0.102 (inch); No. of Terminals: 4; Packing Method: TAPE AND REEL; Width (mm): 7.2;
CMS1-4-R
SINGLE PHASE EMI FILTER; Rated Current: 3.8 A; Additional Features: INDUCTANCE 18 MICRO HENRY; Minimum Operating Temperature: -40 Cel; Height: 2.6 mm; Length: 9.4 mm;
Eaton Corporation's CMS1-4-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. It operates b/w -40°C to 160°C, rated at 3.8A. Ideal for surface mount applications due to its compact dimensions of L9.4xB7.2xH2.6mm, it comes in tape and reel packaging for convenience.
CMS1-7-R
SINGLE PHASE EMI FILTER; Rated Current: 2.6 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 160 Cel; Minimum Operating Temperature: -40 Cel; Width (mm): 7.2;
SINGLE PHASE EMI FILTER; Rated Current: 2.6 A; Height: 2.6 mm; Width (mm): 7.2; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
CMS1-12-R
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Additional Features: INDUCTANCE 131 MICRO HENRY; Length: 9.4 mm; Width (mm): 7.2; Manufacturer Series: CMS;
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 7.2; Approvals (V): UL;
SINGLE PHASE EMI FILTER; Rated Current: 3.1 A; Length: 9.4 mm; No. of Terminals: 4; Packing Method: TAPE AND REEL; Height: 2.6 mm;
CMS1-13
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Additional Features: INDUCTANCE 166 MICRO HENRY; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Packing Method: TAPE AND REEL;
CMS1-1
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Manufacturer Series: CMS; Packing Method: TAPE AND REEL; Length: 9.4 mm; Width (mm): 7.2;
CMS1-13-R
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel; Approvals (V): UL; Packing Method: TAPE AND REEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved