Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Height: 99 mm; Length: 99.5 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Northwest PG Solutions
1+ parts
$2.417
100+ parts
1k+ parts
10k+ parts
Native Components
$2.132
EMI Mains Filters FIL-1S-1-6A-230AC-PT attributes and parameters. Explore more EMI Mains Filters devices from Phoenix Contact
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Rated Current:
Rated Voltage:
Width (mm):
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM358AN
NXP Semiconductors
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RTEN-5030D
TDK
TDK's RTEN-5030D is a 3-phase EMI filter with 30A rated current and 500V voltage. It offers approvals from UL and EN, operates b/w -25°C to 85°C, and has a high pot of 2500V. Ideal for panel mounting applications requiring effective mains filtering in industrial settings.
RN212-0.6-02-15M
Schaffner Holding Ag
The Schaffner Holding Ag RN212-0.6-02-15M is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with a rated voltage of 300V and current of 0.6A. Operating b/w -40°C to 100°C, it has dimensions of L18.0xB12.5xH20.0 (mm) and is ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
SCR-100-1R2A010JH
KEMET Corporation's SCR-100-1R2A010JH is a UL-approved EMI mains filter with 250V rated voltage and 10A current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for single-phase applications, this through-hole mount filter measures 27mm x 29mm x 23mm.
RSHN-2006
RSHN-2006 by TDK is a single-phase EMI filter with 250V rated voltage and 6A rated current. It offers approvals from UL, CSA, EN and operates b/w -25°C to 85°C. With a width of 52mm and height of 35mm, it is ideal for panel mount applications requiring high insulation resistance (100 Mohm).
SSR10H-14140
KEMET Corporation's SSR10H-14140 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and a rated current of 1.4A. This single-phase filter operates b/w -25°C to 120°C and is UL approved for applications requiring effective electromagnetic interference suppression.
SS11VL-R06270
SS11VL-R06270 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.6A rated current. It operates b/w -25°C to 75°C, offering 100 Mohm min insulation resistance. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB14.5xH19.5 (mm).
600APS12L
TE Connectivity
TE Connectivity's 600APS12L is a UL-approved EMI mains filter with a rated voltage of 520V. Featuring a three-phase filter type, it has a high pot of 2200V and max leakage current of 270mA. Ideal for panel mounting applications, this filter operates b/w -10°C to 50°C at an operating frequency of 50-60Hz.
FN2010-12-06
FN2010-12-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with a rated voltage of 250V. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH29.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems up to 13.8A.
SC-30-12JH
KEMET Corporation's SC-30-12JH is a 250V UL-approved EMI mains filter with 30A rated current. Featuring a single-phase filter type, it offers high insulation resistance of 100 Mohm and operates b/w -25°C to 105°C. Ideal for applications requiring effective electromagnetic interference suppression in various electronic systems.
CMS2-2-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 4.4 A; Width (mm): 8.89; Maximum Operating Temperature: 160 Cel; Length: 8.89 mm; Minimum Operating Temperature: -40 Cel;
B84111F0000B030
TDK's B84111F0000B030 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 3A rated current. It offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications due to compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency.
7448030509
Wuerth Elektronik & Kg
Wurth Elektronik 7448030509 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 5A rated current. Operating from -40 to 125 °C, it's ideal for EMI mains filtering in various applications due to its compact dimensions of L22.0XB13.5XH25.0 mm and through-hole mounting design.
RTEN-5060
The TDK RTEN-5060 EMI Mains Filter is a THREE PHASE filter with 60A rated current and 500V voltage. It offers high insulation resistance of 100 Mohm, UL and EN approvals, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective filtering at 60Hz frequency.
SSRH7H-M04596
KEMET Corporation's SSRH7H-M04596 is a UL approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures ranging from -25°C to 120°C and has a rated voltage of 250V. This single-phase filter, with a rated current of 0.4A, is designed for through-hole mounting applications.
B84143A0008R105
TDK B84143A0008R105 is a 520V UL/ENEC-10 approved EMI mains filter with 6 terminals. It offers 8A rated current, 2720V high pot, and 13mA max leakage current. Ideal for three-phase EMI filtering applications due to its compact dimensions of L133.7xB51.4xH63.0mm and panel mount design.
3VR3
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 3 A; High Pot: 2250 V; Rated Voltage: 120 V; Insertion Loss At Minimum Frequency: 30 dB;
600APS12P
TE Connectivity's 600APS12P EMI Mains Filter is a UL approved three-phase filter with a rated voltage of 690V and current of 600A. With a wide operating temperature range (-10 to 50°C) and high pot rating (2640V), it is ideal for panel mount applications requiring effective EMI filtering at 50-60Hz frequencies.
SN8S-30P2
KEMET Corporation's SN8S-30P2 is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating from -25°C to 105°C, it has a diameter of 19mm and height of 10.5mm for through-hole mounting applications in EMI mains filters.
SC-02-10GS
The KEMET SC-02-10GS EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 105°C, ideal for single-phase applications. Measuring L15.0xB8.5xH15.0 mm, it supports a max current of 2A with through-hole mounting in bulk packaging.
FN3256H-120-35
FN3256H-120-35 by Schaffner Holding Ag is a THREE PHASE EMI FILTER with a rated voltage of 480 V. It has a max operating temperature of 100°C and a high pot of 3000 V. This panel mount filter is suitable for applications requiring EMI mains filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FIL-1S-1-10A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Rated Voltage: 230 V; Width (mm): 45;
FIL-1S-1-10A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Width (mm): 45; Height: 99 mm;
FIL-1S-1-1A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Approvals (V): IEC; UL; VDE; Length: 99.5 mm; Width (mm): 27; Mounting Type: PANEL MOUNT;
FIL-1S-1-1A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Mounting Type: PANEL MOUNT; Width (mm): 27; Height: 99 mm; Rated Voltage: 230 V;
FIL-1S-1-20A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Width (mm): 45; Height: 99 mm; Approvals (V): IEC; UL; VDE; Length: 99.5 mm;
FIL-1S-1-20A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Length: 99.5 mm; Width (mm): 45; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE;
FIL-1S-1-3A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Height: 99 mm; Length: 99.5 mm;
FIL-1S-1-3A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Width (mm): 27; Height: 99 mm;
FIL-1S-1-6A-230AC-UT
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Width (mm): 45; Height: 99 mm; Length: 99.5 mm; Rated Voltage: 230 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved