Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schaffner Holding Ag's FN3258-42-33 EMI Mains Filter is a UL, CSA, and ENEC-14 approved three-phase filter with 480V rated voltage and 42A current. With a compact size of L280.0xB50.0xH85.0 mm, it operates b/w -25°C to 100°C making it ideal for panel mounting applications requiring high pot of 2650V and max leakage current of 33mA at 60Hz frequency.
Median Price
$276.020
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$222.840
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$246.766
RS Americas
$261.860
Sager
$273.400
$248.550
Mouser Electronics
$255.990
Newark
$327.940
$315.800
Verical
$334.957
DigiKey
$349.090
Element14
$399.120
Nova Conductors
$225.045
Electro Sonic
$286.010
$242.740
IBS Electronics
$337.545
$294.875
$285.464
Vyrian
Electro Mavin
Corohmni
$1.928
Aztec Data Supply Inc.
$2.670
AZTECH Wire
$11.178
Continental Prestige Electronics
$176.690
Aranea Global
$220.544
$211.722
Argo Parts USA
S.R.D Solutions
Perfect Parts
GreenTree Electronics
Having UL, CSA, and ENEC-14 approvals ensures this filter meets stringent quality and safety standards.
With a high rated voltage of 480V, this filter is suitable for industrial applications requiring heavy loads.
The three-phase EMI filter design offers superior interference suppression in demanding environments.
The high maximum operating temperature allows this filter to function reliably even in hot conditions.
With a low minimum operating temperature, this filter can be used in a wide range of environmental conditions.
The compact width of 50mm makes this filter easy to integrate into existing systems with space constraints.
Designed for use with the standard 60Hz frequency, ensuring compatibility with most applications.
The length of 280mm provides ample filtering capacity for three-phase systems.
The high potential voltage rating of 2650V ensures reliable insulation and safety.
With a low maximum leakage current of 33mA, this filter helps prevent electrical hazards.
The panel mount design allows for easy and secure installation in control cabinets or enclosures.
The compact dimensions of 280mm x 50mm x 85mm make this filter suitable for space-constrained applications.
With a high rated current of 42A, this filter can handle heavy loads without overheating.
The height of 85mm provides ample space for internal components and efficient heat dissipation.
EMI Mains Filters FN3258-42-33 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Additional Features:
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
PCN Design/Specification - UKCA Design 28/Jun/2021
PCN Assembly/Origin - COO Change 20/May/2021
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
1554216002
Molex
WIRE AND CABLE;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
FIL-1S-1-20A-230AC-UT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Length: 99.5 mm; Width (mm): 45; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE;
SCF25XV-190-1R8A008JH
KEMET Corporation
SINGLE PHASE EMI FILTER;
10VV1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Rated Voltage: 120 V; Height: 38.9 mm; Approvals (V): UL; CSA; VDE;
RTEN-5010D
TDK
The TDK RTEN-5010D is a 3-phase EMI filter with a rated voltage of 500V and current of 10A. It offers high insulation resistance of 100 Mohm, approvals from UL and EN, and operates b/w -25°C to 85°C. Ideal for panel mounting applications requiring effective mains filtering at a frequency of 60Hz.
SC-03-10G
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Length: 17.5 mm; Minimum Insulation Resistance: 100 Mohm; Width (mm): 14; Rated Voltage: 250 V;
UF1717V-300Y1R2-03
UF1717V-300Y1R2-03 by TDK is a single-phase EMI mains filter with 4 terminals and rated voltage of 280V. It offers a min insulation resistance of 100 Mohm, operates at temperatures from -20 to 120 °C, and has UL, CSA, IEC approvals. Ideal for applications requiring noise suppression in electrical systems.
FIL-1S-1-20A-230AC-PT
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Width (mm): 45; Height: 99 mm; Approvals (V): IEC; UL; VDE; Length: 99.5 mm;
RSEL-2003W
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 20 mm; Mounting Type: PANEL MOUNT;
RN122-1-02
Schaffner Holding Ag
The Schaffner Holding Ag RN122-1-02 EMI Mains Filter is a single-phase filter with UL and VDE approvals, rated for 250V and 1A. Operating temperatures range from -40°C to 125°C, suitable for through-hole mounting in applications requiring effective electromagnetic interference suppression at 50/60Hz frequencies.
B84142-B16-R
TDK's B84142-B16-R is a UL, CSA, ENEC-10 approved 250V single-phase EMI filter with 16A rated current. Featuring 2700V high pot and 3.5mA max leakage current, it operates at 50/60Hz frequency. Ideal for panel mounting applications, its compact dimensions of L121.0xB113.0xH61.0mm make it suitable for various electronic devices requiring effective EMI mains filtering.
B84112G0000B030
TDK's B84112G0000B030 EMI Mains Filter is UL, CUL, and ENEC-10 approved with a rated voltage of 250V. It features a single-phase filter type, 3A rated current, and high pot of 2700V. Ideal for panel mounting applications requiring effective noise suppression in electrical systems.
RN222-4-02-3M3
RN222-4-02-3M3 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 4A rated current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L31.0xB18.0xH29.3 mm, it is designed for through-hole mounting in various electronic systems.
FMW-65-0003
Schurter Ag
Schurter Ag's FMW-65-0003 is a UL, IEC, VDE, ENEC-10 approved 440V three-phase EMI filter with 10A rated current. With a high pot of 3000V and max leakage current of 0.5mA, it operates b/w -25°C to 100°C. Ideal for panel mount applications due to its compact dimensions of L66.0xB51.0xH43.0mm.
SCF-05-350
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 15 mm; Maximum Operating Temperature: 65 Cel; Dimensions: L15.0XB12.0XH15.0 (mm)/L0.591XB0.472XH0.591 (inch); Minimum Operating Temperature: -25 Cel;
SCR22-060-1R0A075JH
KEMET's SCR22-060-1R0A075JH is a UL-approved EMI mains filter with 250V rated voltage and 6A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and is a single-phase filter. Ideal for through-hole mounting applications in various industries.
SCR-100-1R2A010JH
KEMET Corporation's SCR-100-1R2A010JH is a UL-approved EMI mains filter with 250V rated voltage and 10A current. With a min insulation resistance of 100 Mohm, it operates b/w -25°C to 120°C. Ideal for single-phase applications, this through-hole mount filter measures 27mm x 29mm x 23mm.
3-128-417
The Schurter Ag 3-128-417 is a THREE PHASE EMI FILTER with a rated voltage of 520V and max operating temperature of 100°C. With approvals from IEC, UL, and VDE, it has a high pot of 2750V and rated current of 110A. Ideal for panel mount applications in industries requiring efficient EMI mains filtering.
TF2326VU-300Y5R0-1H
TF2326VU-300Y5R0-1H by TDK is a UL, CSA, and IEC approved EMI mains filter with a rated voltage of 280V. It features a single-phase filter type, operates b/w -20°C to 120°C, and has a rated current of 5A. This through-hole mount filter with dimensions D23XL20 (mm) is ideal for applications requiring effective electromagnetic interference suppression.
LF-202A
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Minimum Insulation Resistance: 300 Mohm; Width (mm): 32.0; Maximum Leakage Current: 1 mA; Dimensions: L64.0XB32.0XH25.0 (mm)/L2.52XB1.26XH0.984 (inch);
1-1609034-2
TE Connectivity's 1-1609034-2 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 6A. It operates b/w -10°C to 40°C, with a max leakage current of 0.75mA at 50Hz. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FN3256H-120-35
FN3256H-120-35 by Schaffner Holding Ag is a THREE PHASE EMI FILTER with a rated voltage of 480 V. It has a max operating temperature of 100°C and a high pot of 3000 V. This panel mount filter is suitable for applications requiring EMI mains filtering.
FN3256H-120-35-R69
THREE PHASE EMI FILTER; Rated Current: 120 A; Maximum Leakage Current: .9 mA; Width (mm): 170; Maximum Operating Temperature: 100 Cel; Rated Voltage: 480 V;
FN3270H-320-99
THREE PHASE EMI FILTER; Rated Current: 320 A; Operating Frequency (Hz): 60Hz; Maximum Operating Temperature: 100 Cel; Dimensions: L240.0XB200.0XH86.0 (mm)/L9.449XB7.874XH3.386 (inch); Rated Voltage: 520 V;
FN3258-30-33
The Schaffner Holding Ag FN3258-30-33 is a 480V UL/CSA/ENEC-14 approved EMI mains filter with a rated current of 30A. It operates at temperatures from -25°C to 100°C and has a max leakage current of 33mA. This three-phase filter, measuring L240.0xB50.0xH85.0 mm, is ideal for panel mounting applications in industrial settings.
FN3288HV-80-34-C36-R65
THREE PHASE EMI FILTER; Rated Current: 34 A; Height: 220 mm; Width (mm): 95; Rated Voltage: 305 V; Operating Frequency (Hz): 60Hz;
FN3258-130-35
THREE PHASE EMI FILTER; Rated Current: 130 A; Height: 150 mm; Mounting Type: PANEL MOUNT; Rated Voltage: 480 V; Minimum Operating Temperature: -25 Cel;
FN3288HVIT-100-35-C26-R60
THREE PHASE EMI FILTER; Rated Current: 100 A; Maximum Operating Temperature: 100 Cel; Width (mm): 95; Height: 230 mm; High Pot: 3530 V;
FN3288HVIT-100-35-C43-R60
THREE PHASE EMI FILTER; Rated Current: 100 A; Mounting Type: PANEL MOUNT; Rated Voltage: 305 V; Minimum Insulation Resistance: 1 Mohm; Length: 280 mm;
FN3288IT-100-35-C34-R60
Schaffner Holding Ag's FN3288IT-100-35-C34-R60 is a 3-phase EMI filter with 100A rated current, 305V voltage, and 1 Mohm insulation resistance. It operates b/w -40°C to 100°C, approved by IEC and UL for applications requiring high pot of 2900V and low leakage current of 7mA.
FN3258-100-35
THREE PHASE EMI FILTER; Rated Current: 100 A; Width (mm): 90.0; Additional Features: TERMINAL BLOCK CONNECTIONS; Approvals (V): UL; CSA; ENEC-14; Minimum Operating Temperature: -25 Cel;
FN3258-55-34
THREE PHASE EMI FILTER; Rated Current: 55 A; Additional Features: TERMINAL BLOCK CONNECTIONS; Height: 90 mm; High Pot: 2650 V; Operating Frequency (Hz): 60Hz;
FN3258-7-44
THREE PHASE EMI FILTER; Rated Current: 7 A; High Pot: 2650 V; Length: 160 mm; Height: 70 mm; Maximum Leakage Current: 33 mA;
FN3258H-100-35
THREE PHASE EMI FILTER; Rated Current: 100 A; Approvals (V): UL; CSA; ENEC-14; Operating Frequency (Hz): 60Hz; Maximum Leakage Current: 33 mA; Additional Features: TERMINAL BLOCK CONNECTIONS;
FN3258H-130-35
THREE PHASE EMI FILTER; Rated Current: 130 A; Additional Features: TERMINAL BLOCK CONNECTIONS; Dimensions: L240.0XB90.0XH150.0 (mm)/L9.449XB3.543XH5.906 (inch); Length: 240 mm; Height: 150 mm;
FN3258H-16-44
THREE PHASE EMI FILTER; Rated Current: 16 A; Approvals (V): UL; CSA; ENEC-14; Dimensions: L220.0XB45.0XH70.0 (mm)/L8.661XB1.772XH2.756 (inch); Maximum Operating Temperature: 100 Cel; Additional Features: TERMINAL BLOCK CONNECTIONS;
FN3258H-30-33
THREE PHASE EMI FILTER; Rated Current: 30 A; Height: 85 mm; Dimensions: L240.0XB50.0XH85.0 (mm)/L9.449XB1.969XH3.346 (inch); Approvals (V): UL; CSA; ENEC-14; Operating Frequency (Hz): 60Hz;
FN3258H-30-47
THREE PHASE EMI FILTER; Rated Current: 30 A; Rated Voltage: 520 V; Additional Features: TERMINAL BLOCK CONNECTIONS; Minimum Operating Temperature: -25 Cel; Dimensions: L240.0XB50.0XH85.0 (mm)/L9.449XB1.969XH3.346 (inch);
FN3258H-42-33
THREE PHASE EMI FILTER; Rated Current: 42 A; Additional Features: TERMINAL BLOCK CONNECTIONS; Maximum Leakage Current: 33 mA; Rated Voltage: 520 V; Dimensions: L280.0XB50.0XH85.0 (mm)/L11.024XB1.969XH3.346 (inch);
FN3258H-55-34
THREE PHASE EMI FILTER; Rated Current: 55 A; Maximum Operating Temperature: 100 Cel; Maximum Leakage Current: 33 mA; Minimum Operating Temperature: -25 Cel; Additional Features: TERMINAL BLOCK CONNECTIONS;
FN3258H-7-44
THREE PHASE EMI FILTER; Rated Current: 7 A; Maximum Operating Temperature: 100 Cel; High Pot: 2650 V; Height: 70 mm; Width (mm): 40.0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved