Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; Mounting Type: SURFACE MOUNT; Width (mm): 11.43; Dimensions: L11.43XB11.43XH6 (mm); Length: 11.43 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Dan-Mar Components
EMI Mains Filters CMS3-1 attributes and parameters. Explore more EMI Mains Filters devices from Cooper Industries
Additional Features:
Approvals (V):
Filter Type:
Height:
Length:
Manufacturer Series:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Width (mm):
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Eic Semiconductor
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Yangzhou Yangjie Electronics
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
10511
Murrelektronik
10511 by Murrelektronik is a CE and EN approved EMI mains filter with a rated voltage of 440V. Featuring a three-phase filter type, it operates at temperatures ranging from -25°C to 85°C. With a rated current of 6A, this panel mount filter is ideal for industrial applications requiring high-potential protection.
B82722J2102N001
TDK
The TDK B82722J2102N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with a rated current of 1A. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm (W x L x H). Ideal for applications requiring effective electromagnetic interference suppression in power supply systems.
B84131-M1-G135
B84131-M1-G135 by TDK is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 35A rated current. It features a three-phase filter type, high pot of 2700V, and max leakage current of 3.5mA. Ideal for panel mount applications in industrial settings due to its compact dimensions of L149xB104xH80mm.
SSHB21HS-15064
KEMET Corporation
KEMET Corporation's SSHB21HS-15064 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25°C to 130°C. It is UL approved and designed for single-phase applications requiring a rated current of 1.5A.
FN2410-100-34
Schaffner Holding Ag
The Schaffner Holding Ag FN2410-100-34 is a UL, CSA, and ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V. It operates b/w -25°C to 100°C and has a max leakage current of 3.4mA. This DIN rail mount filter measures L140.0xB115.0xH100.0mm and is suitable for applications requiring up to 100A rated current at 400Hz frequency.
CMS3-1-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 5.7 A; Packing Method: TAPE AND REEL; Approvals (V): UL; Dimensions: L11.43XB11.43XH6 (mm); Minimum Operating Temperature: -40 Cel;
FN2060-16-06
The Schaffner Holding Ag FN2060-16-06 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 18.4A. It operates at temperatures from -25°C to 100°C and has dimensions of L64.8xB49.8xH40.3 (mm). Ideal for panel mounting applications requiring effective EMI filtering at 50/60Hz frequencies.
SS30V-R120380
KEMET Corporation's SS30V-R120380 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 1.2A. This single-phase filter operates b/w -25°C to 120°C, making it ideal for applications requiring UL approval and high-pot testing up to 500V.
1-1609034-2
TE Connectivity
TE Connectivity's 1-1609034-2 EMI Mains Filter is a single-phase filter with a rated voltage of 250V and rated current of 6A. It operates b/w -10°C to 40°C, with a max leakage current of 0.75mA at 50Hz. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
NBC-10-472-D
Cosel
The Cosel NBC-10-472-D EMI Mains Filter is a single-phase filter with UL, CSA, VDE, and ENEC-10 approvals. It has a rated voltage of 250V, rated current of 10A, and operates b/w -40°C to 85°C. Ideal for DIN rail mounting applications due to its compact dimensions of L92.0xB53.0xH41.0mm.
FMBC-A91G-J310
Schurter Ag
Schurter Ag's FMBC-A91G-J310 is a UL, CUL, VDE approved EMI mains filter with 480V rated voltage. It offers 130A rated current and operates at -25 to 100°C. Ideal for three-phase applications, it has a compact size of L240.0xB90.0xH150.0mm for panel mounting in industrial settings.
ESP-03-222
Cosel ESP-03-222 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, has a high pot of 2500V, and max leakage current of 0.5mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
PLH10AN1612R1P2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2.1 A; Maximum Operating Temperature: 120 Cel; Minimum Insulation Resistance: 100 Mohm; Additional Features: INDUCTANCE 160 MICRO HENRY; HIGH-FREQUENCY TYPE; CORE VERTICAL TYPE STRUCTURE; ALIGNED WINDING TYPE; JESD-609 Code: e2;
B84111F0000M110
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
SS20H-R10100
KEMET Corporation's SS20H-R10100 is a SINGLE PHASE EMI FILTER with 100 Mohm Min. Insulation Resistance, 250 V Rated Voltage, and 1 A Rated Current. It operates b/w -25 to 120 °C and has High Pot of 500 V. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB22.0xH18.5 mm and Through Hole Mounting type.
SC-02-10GS
The KEMET SC-02-10GS EMI Mains Filter has a rated voltage of 250V and insulation resistance of 100 Mohm. With UL approval, it operates b/w -25°C to 105°C, ideal for single-phase applications. Measuring L15.0xB8.5xH15.0 mm, it supports a max current of 2A with through-hole mounting in bulk packaging.
6EHQ1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .15 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Insertion Loss At Maximum Frequency: 42 dB; Maximum Leakage Current: .002 mA;
6MV1
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 6 A; Insertion Loss At Maximum Frequency: 50 dB; Maximum Leakage Current: .07 mA; Minimum Frequency: .15 MHz;
FN410-1-02
FN410-1-02 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 5 terminals and rated voltage of 250V. It operates at temperatures from -25 to 100°C, has a max leakage current of 0.373mA, and can handle a rated current of 1.2A. This through-hole mount filter is ideal for applications requiring effective EMI filtering in compact spaces.
SU7VC-05011
KEMET Corporation's SU7VC-05011 EMI Mains Filter has a rated voltage of 125V and min insulation resistance of 100 Mohm. With a filter type of SINGLE PHASE EMI FILTER, it operates b/w -25 to 75 °C and is suitable for THROUGH HOLE MOUNT applications at a rated current of 0.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Cooper Industries
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved