Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TE Connectivity 10VW1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 18 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250 V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
Median Price
$46.440
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
RS Americas
1+ parts
$32.930
100+ parts
-
1k+ parts
10k+ parts
Arrow
$39.060
$36.010
$35.700
TTI
$43.090
$37.420
$36.620
Master Electronics
$33.020
$32.850
Mouser Electronics
$46.880
$39.680
$38.240
Heilind Electronics
$48.660
$38.016
Interstate Connecting
$49.556
$39.940
Newark
$52.920
$47.090
$46.180
DigiKey
$54.200
$43.297
TE Connectivity
$101.230
$87.730
Verical
$38.847
Sager
$34.790
$31.240
Chip1Stop
RS (Exports)
$36.287
Freelance Electronics
$26.714
Nova Conductors
$30.000
TME
$34.290
Electro Sonic
$39.620
$28.510
$27.940
IBS Electronics
$64.908
$47.152
$46.311
R&J Components
A2Z Electronics, Inc.
Vyrian
Rapid Electronics
Speed Components Ltd
Aztec Data Supply Inc.
$2.834
Continental Prestige Electronics
$29.400
Netroflash
Semicontronic
$60.920
$59.397
$59.092
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Having approvals from reputable organizations such as UL, CSA, and VDE ensures that the product meets the necessary safety and quality standards.
The high insertion loss at minimum frequency of 18 dB indicates effective filtering of electromagnetic interference at lower frequencies.
The rated voltage of 250 V makes this EMI mains filter suitable for use in various electronic and electrical applications.
Being a single phase EMI filter simplifies the installation process and makes it ideal for single phase power systems.
The high insertion loss at maximum frequency of 65 dB shows strong suppression of electromagnetic interference at higher frequencies.
The maximum operating temperature of 40°C ensures the filter can perform reliably even in demanding environmental conditions.
With a minimum operating temperature of -10°C, this filter can function effectively in a wide range of temperature environments.
The compact width of 52.8 mm allows for easy integration into various electronic or electrical systems with limited space.
The low minimum frequency of 0.15 MHz demonstrates the filter's capability to eliminate electromagnetic interference across a wide frequency spectrum.
Designed for commonly used power frequencies of 50/60Hz, making it versatile and compatible with a wide range of equipment.
The moderate length of 84.8 mm provides a balance between performance and space requirements in the installation of the filter.
With a maximum frequency handling capability of 10 MHz, this filter offers reliable suppression of interference across a broad frequency range.
The high pot rating of 2250 V ensures electrical safety and isolation between the input and output sides of the filter.
The low maximum leakage current of 0.5 mA indicates minimal loss of electrical current through the filter, resulting in efficient operation.
The panel mount design enables straightforward and secure installation of the filter onto various surfaces or enclosures.
The compact dimensions of 84.8mm x 52.8mm x 38.9mm (3.34in x 2.08in x 1.53in) make it suitable for space-constrained applications.
With a rated current of 10 A, this filter can accommodate moderate to high power loads without compromising on performance.
The height of 38.9 mm provides a good balance between compactness and functionality in the overall design of the filter.
EMI Mains Filters 10VW1 attributes and parameters. Explore more EMI Mains Filters devices from TE Connectivity
Additional Features:
Approvals (V):
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
High Pot:
Insertion Loss At Maximum Frequency:
Insertion Loss At Minimum Frequency:
Maximum Leakage Current:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
10VW1 Filters trade compliance attributes, and parameters.
NSN
5915-01-114-9855, 5915011149855
NIIN
011149855
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SPC TECHNOLOGY/ MULTICOMP
Micro Commercial Components
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
MMBT2907ALT1G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B84112G0000B030
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Width (mm): 52.0; Approvals (V): UL; CUL; ENEC-10; High Pot: 2700 V; Rated Voltage: 250 V;
2FB3
TE Connectivity's 2FB3 EMI Mains Filter is a SINGLE PHASE filter with 277V voltage rating and 2A current. It operates b/w -10°C to 50°C, with max leakage current of 0.12mA. Ideal for THROUGH HOLE MOUNT applications in electronic devices requiring EMI suppression.
SC-10-30J
KEMET Corporation
KEMET Corporation's SC-10-30J is a UL approved EMI mains filter with 100 Mohm min insulation resistance, 250V rated voltage, and 10A rated current. It operates b/w -25°C to 105°C, ideal for single-phase EMI filtering applications requiring through-hole mounting in compact spaces.
FN2410-100-34
Schaffner Holding Ag
The Schaffner Holding Ag FN2410-100-34 is a UL, CSA, and ENEC-14 approved single-phase EMI mains filter with a rated voltage of 250V. It operates b/w -25°C to 100°C and has a max leakage current of 3.4mA. This DIN rail mount filter measures L140.0xB115.0xH100.0mm and is suitable for applications requiring up to 100A rated current at 400Hz frequency.
SN8S-300JB
KEMET Corporation's SN8S-300JB is a UL-approved SINGLE PHASE EMI FILTER with 2A rated current. Operating temperature ranges from -25°C to 105°C, suitable for various applications requiring EMI mains filtering. Compact dimensions of 12.5mm width and 18mm height make it ideal for through-hole mounting in electronic devices.
10511
Murrelektronik
10511 by Murrelektronik is a CE and EN approved EMI mains filter with a rated voltage of 440V. Featuring a three-phase filter type, it operates at temperatures ranging from -25°C to 85°C. With a rated current of 6A, this panel mount filter is ideal for industrial applications requiring high-potential protection.
PLA10AN3630R3D2B
Murata Manufacturing
Murata Manufacturing's PLA10AN3630R3D2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 0.3A rated current. It operates b/w -25°C to 120°C, offering high insulation resistance of 100 Mohm. Ideal for EMI mains filtering applications due to its compact dimensions of L18.0xB16.0xH17.5 mm and through-hole mounting design.
RN114-0.3-02-47M
Schaffner Holding Ag's RN114-0.3-02-47M EMI Mains Filter, rated at 300V and 0.3A, is UL, IEC, VDE, ENEC-10 approved. With a single-phase filter type and operating temperatures from -40 to 100°C, it's ideal for applications requiring through-hole mounting in 50/60Hz environments.
NEF1-3-2794110
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Operating Frequency (Hz): 60Hz; Rated Voltage: 264 V; Maximum Operating Temperature: 100 Cel; Mounting Type: PANEL MOUNT;
RTEN-5030D
THREE PHASE EMI FILTER; Rated Current: 30 A; Length: 140 mm; Height: 50.4 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel;
NAC-16-472-D
Cosel
The Cosel NAC-16-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI mains filter with 250V rated voltage and 16A rated current. It operates at temperatures from -40 to 85°C and features high pot of 2500V. Ideal for DIN rail mounting in applications requiring effective EMI filtering at 60Hz frequency.
SS11VL-R06270
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Length: 22 mm; Width (mm): 14.5; Maximum Operating Temperature: 75 Cel; Rated Voltage: 250 V;
SSHB21HS-15064
KEMET Corporation's SSHB21HS-15064 EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operating temperature range from -25°C to 130°C. It is UL approved and designed for single-phase applications requiring a rated current of 1.5A.
SCT19XV-190-1R5A005JH
KEMET's SCT19XV-190-1R5A005JH is a 1000V rated SINGLE PHASE EMI Filter with 19A current capacity. It offers high insulation resistance of 100 Mohm and operates b/w -40°C to 150°C. Ideal for EMI mains filtering applications due to its through-hole mounting design and compact dimensions (27mm x 28mm x 18.9mm).
744834407
Wuerth Elektronik & Kg
Wurth Elektronik 744834407 is a single-phase EMI filter with 4 terminals, rated for 250V and 3.5A current. Operating temperature ranges from -40°C to 125°C, suitable for applications requiring noise suppression in mains power systems at frequencies up to 50Hz. Dimensions are L32.5xB28.0xH22.0mm, ideal for through-hole mounting setups.
CMS2-4-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 2.8 A; Maximum Operating Temperature: 160 Cel; Packing Method: TAPE AND REEL; Width (mm): 8.89; Manufacturer Series: CMS;
LF-202U-1
KEMET LF-202U-1 EMI Mains Filter has 300 Mohm Min Insulation Resistance, 250V Rated Voltage, and -20 to 55 °C Operating Temp. UL approved for PANEL MOUNT application in SINGLE PHASE systems with 60Hz freq.
FN3288HV-80-34-C36-R65
Schaffner's FN3288HV-80-34-C36-R65 is a 3-phase EMI filter with 305V rated voltage, 34A current, and 2650V high pot. It operates b/w -40°C to 100°C, has approvals from IEC and UL, and offers max leakage current of 12.4mA. Ideal for panel mounting applications requiring efficient mains filtering at a frequency of 60Hz.
PLA10AN1522R0R2B
Tokyo Parts Industrial
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Terminal Finish: Tin/Copper (Sn/Cu); Maximum Operating Temperature: 120 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: INDUCTANCE 1.5 MILLI HENRY; STANDARD WINDING TYPE;
6609046-7
TE Connectivity's 6609046-7 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 12 dB at min frequency and 45 dB at max frequency. With a rated voltage of 250V, it is ideal for applications requiring effective EMI filtering in electrical systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10VW1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 10 A; Maximum Leakage Current: .5 mA; Height: 38.9 mm; Insertion Loss At Maximum Frequency: 65 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved