Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 74482210002 is a single-phase EMI filter with 4 terminals, rated for 250V and 10A. Operating b/w -40°C to 125°C, it's ideal for applications requiring EMI mains filtering at a frequency of 50Hz. Mountable through holes, its compact size of L18.5xB14.5xH22.0 (mm) makes it suitable for various electronic devices.
Median Price
$6.010
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.010
100+ parts
$4.570
1k+ parts
$4.140
10k+ parts
-
Farnell
$5.450
$4.150
DigiKey
$5.452
Mouser Electronics
Newark
$7.100
$6.160
$5.910
$5.790
Distrelec
$7.197
Verical
$5.500
Nova Conductors
$5.240
R&J Components
Vyrian
VNN
Prism Electronics
Pegasus Components GmbH
Aztec Data Supply Inc.
$1.790
Semicontronic
$4.260
$4.154
$4.132
Aranea Global
$5.135
$4.930
Advanced Electronics
$5.375
$4.945
$4.634
Continental Prestige Electronics
$5.570
$3.830
Perfect Parts
Argo Parts USA
The high rated voltage makes this EMI mains filter suitable for use in a wide range of power applications.
Having 4 terminals allows for easy and secure connection, ensuring reliable performance.
The single phase EMI filter helps in reducing electromagnetic interference and ensures clean power supply.
With a high maximum operating temperature, this EMI filter can withstand demanding environmental conditions.
The low minimum operating temperature ensures that the EMI filter can function effectively even in cold environments.
The compact width makes this EMI filter suitable for applications where space is limited.
The filter is designed to work optimally at the standard power frequency of 50Hz, ensuring compatibility with most power systems.
The moderate length of the EMI filter makes it versatile for a variety of mounting configurations.
The through hole mounting type ensures easy and secure installation of the EMI filter on circuit boards.
The compact dimensions make this EMI filter suitable for use in various electronic devices and equipment.
The high rated current capacity allows the EMI filter to handle a substantial amount of electrical load without overheating.
The moderate height of the EMI filter makes it easy to integrate into different electronic setups.
EMI Mains Filters 74482210002 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Additional Features:
Filter Type:
Height:
Length:
Mounting Type:
No. of Terminals:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Changzhou Starsea Electronics
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Daco Semiconductor
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
RSEN-2010D
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 35 mm; Maximum Leakage Current: 1 mA; Approvals (V): UL; CSA; EN; Maximum Operating Temperature: 85 Cel;
SS11V-R10093-CH
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Operating Frequency (Hz): 50Hz; Length: 22 mm; No. of Terminals: 4; Height: 21.5 mm;
SC-26-S010JH
KEMET Corporation
KEMET Corporation's SC-26-S010JH is a 3-phase EMI mains filter with 500V UL approval. It offers a rated current of 26A, insulation resistance of 500 Mohm, and operates b/w -25°C to 120°C. Ideal for applications requiring high-pot testing up to 100V, it has a diameter of 50mm and height of 28mm for through-hole mounting in various electronic systems.
FN3258-42-33
Schaffner Holding Ag
Schaffner Holding Ag's FN3258-42-33 EMI Mains Filter is a UL, CSA, and ENEC-14 approved three-phase filter with 480V rated voltage and 42A current. With a compact size of L280.0xB50.0xH85.0 mm, it operates b/w -25°C to 100°C making it ideal for panel mounting applications requiring high pot of 2650V and max leakage current of 33mA at 60Hz frequency.
RN114-3-02-2M0
Schaffner Holding Ag's RN114-3-02-2M0 EMI Mains Filter, rated at 300V and 3A, is UL, IEC, VDE, ENEC-10 approved. With a single-phase filter type and operating temperatures from -40°C to 100°C, it is ideal for applications requiring through-hole mounting in systems with frequencies of 50/60Hz.
CMS2-7-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.6 A; Width (mm): 8.89; Maximum Operating Temperature: 160 Cel; Mounting Type: SURFACE MOUNT; Length: 8.89 mm;
KEMET's SS11V-R10093-CH EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and operates b/w -25°C to 120°C. With a high pot of 500V, it is ideal for single-phase EMI filtering applications. This through-hole mount filter measures L22.0xB14.5xH21.5mm and can handle a rated current of 1A efficiently.
FN3288HV-80-34-C36-R65
Schaffner's FN3288HV-80-34-C36-R65 is a 3-phase EMI filter with 305V rated voltage, 34A current, and 2650V high pot. It operates b/w -40°C to 100°C, has approvals from IEC and UL, and offers max leakage current of 12.4mA. Ideal for panel mounting applications requiring efficient mains filtering at a frequency of 60Hz.
8-1609148-2
TE Connectivity
TE Connectivity's 8-1609148-2 EMI Mains Filter is a THREE PHASE filter with 520V rated voltage and 250A rated current. It operates b/w -10°C to 50°C, with max leakage current of 222mA. Ideal for panel mounting applications in environments requiring effective electromagnetic interference filtering at 50Hz frequency.
PLA10AN3521R2R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN3521R2R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 1.2A current. It operates b/w -25°C to 120°C, ideal for EMI mains filtering applications requiring high insulation resistance of 100 Mohm.
SC22-05-30J
KEMET Corporation's SC22-05-30J EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 5A. It is a single-phase filter with UL approval, operating b/w -25°C to 120°C. Ideal for applications requiring effective electromagnetic interference filtering in compact spaces.
B82722J2202N001
TDK
TDK B82722J2202N001 is a 250V UL/EN/IEC/VDE approved EMI mains filter with 2A rated current. It features single-phase filtering, through-hole mounting, and dimensions of 16.1mm x 23.3mm x 25.4mm. Ideal for applications requiring effective electromagnetic interference suppression in power systems.
744841414
Wuerth Elektronik & Kg
Wurth Elektronik's 744841414 is a single-phase EMI mains filter with a rated voltage of 250V and max operating temperature of 125°C. It has approvals from ENEC-10, IEC, VDE and dimensions of L16.0xB7.5xH17.5 (mm). Ideal for applications requiring effective EMI filtering in electronic systems with a rated current of 4A.
FN2010-6-06
FN2010-6-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage and 6.9A rated current. It operates at temperatures from -25°C to 100°C, has a high pot of 2000V, and max leakage current of 0.66mA. This single-phase filter is panel mountable and suitable for applications requiring effective electromagnetic interference suppression.
SS21V-R300013
KEMET Corporation's SS21V-R300013 EMI Mains Filter is UL approved with 250V rating, 3A current, and 100 Mohm insulation resistance. Ideal for single-phase applications, it operates b/w -25°C to 120°C temperatures and features a compact size of L20.6xB16.8xH24.5 mm for through-hole mounting in various electronic devices.
CMS1-1-R
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 2.6 mm; Dimensions: L9.4XB7.2XH2.6 (mm); Length: 9.4 mm; Width (mm): 7.2;
7448051804
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
RTEN-2020
RTEN-2020 by TDK is a THREE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It offers approvals from UL, EN, and ENEC-14 for various applications. With a wide operating temperature range (-25 to 85 °C) and compact dimensions (140x70x42 mm), it is ideal for panel mount installations in industrial settings.
CMS3-4-R
SINGLE PHASE EMI FILTER; Rated Current: 3.95 A; Maximum Operating Temperature: 160 Cel; Mounting Type: SURFACE MOUNT; Manufacturer Series: CMS; Minimum Operating Temperature: -40 Cel;
RD7137-6-12M0
DATA LINE FILTER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7448031501
Wurth Elektronik
SINGLE PHASE EMI FILTER; Rated Current: 15 A; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz; Packing Method: TRAY; Mounting Type: THROUGH HOLE MOUNT;
744844221
Wurth Elektronik 744844221 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 125°C, ideal for EMI mains filtering applications. Compact at L28.0xB18.5xH33.0 (mm), it offers through-hole mounting for easy installation in various systems.
7448227005
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
7448031002
Wurth Elektronik 7448031002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A current. It operates b/w -40°C to 125°C, ideal for ENEC-10; VDE approved applications requiring EMI mains filtering.
7448030509
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Dimensions: L22.0XB13.5XH25.0 (mm)/L0.866XB0.531XH0.984 (inch); Maximum Operating Temperature: 125 Cel; Height: 25 mm; Rated Voltage: 250 V;
7448051012
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 33 mm; Rated Voltage: 250 V; Packing Method: CARTON; Width (mm): 23;
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
744839010400
THREE PHASE EMI FILTER; Rated Current: 40 A; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Approvals (V): IEC; Packing Method: TRAY;
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
7448680120
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Length: 27.5 mm; Rated Voltage: 250 V;
7448040707
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 28 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L28.0XB19.0XH28.0 (mm)/L1.102XB0.748XH1.102 (inch); Terminal Finish: TIN COPPER;
7448040435
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e2; Approvals (V): ENEC-10; VDE; Terminal Finish: TIN COPPER;
7448014501
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Mounting Type: THROUGH HOLE MOUNT; Length: 15 mm; Height: 16 mm; Maximum Operating Temperature: 125 Cel;
7448030417
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 13.5; Minimum Operating Temperature: -40 Cel; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz;
744834407
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Length: 32.5 mm; Terminal Finish: Tin (Sn) over Copper (Cu); Width (mm): 28.0; Rated Voltage: 250 V;
744844471
SINGLE PHASE EMI FILTER; Rated Current: 9 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -40 Cel;
7448041104
SINGLE PHASE EMI FILTER; Rated Current: 11 A; Length: 28 mm; JESD-609 Code: e2; Terminal Finish: TIN COPPER; Approvals (V): ENEC-10; VDE;
7448226404
SINGLE PHASE EMI FILTER; Rated Current: 6.4 A; Approvals (V): ENEC-10; IEC; VDE; Length: 18.5 mm; Minimum Operating Temperature: -40 Cel; Width (mm): 14.5;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved