Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 7448031501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 15A current. It operates b/w -40 to 125 °C, suitable for ENEC-10; VDE approved applications requiring EMI mains filtering at 50Hz frequency.
Median Price
$12.130
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Farnell
1+ parts
$10.580
100+ parts
$7.310
1k+ parts
-
10k+ parts
Distrelec
$11.620
Bürklin Elektronik
$12.000
$10.550
$8.110
DigiKey
$12.260
$10.773
$8.284
Mouser Electronics
$9.180
$8.280
Chip1Stop
$12.800
$11.200
$8.620
$7.650
Newark
$14.520
$12.400
$11.290
Element14
$18.660
$16.410
RS (Exports)
$11.537
Verical
$11.100
Nova Conductors
$8.720
Ozdisan Elektronik
$16.946
VNN
Component Sense
Sensible Micro Corp
Vyrian
AZTECH Wire
$1.690
$1.620
$1.590
$1.560
Corohmni
$2.563
Aztec Data Supply Inc.
$3.010
Advanced Electronics
$3.580
$3.401
Semicontronic
$9.430
$9.194
$9.147
Ampacity Inc.
Continental Prestige Electronics
$11.080
$7.140
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Argo Parts USA
Netroflash
$8.546
Kepictronics
iodParts Technologies Inc.
Perfect Parts
Having ENEC-10 and VDE approvals ensures that this EMI mains filter meets high safety and quality standards, making it a reliable choice for use in various applications.
The 250V rated voltage of this EMI mains filter makes it suitable for use in a wide range of electrical systems and equipment without the risk of voltage overload.
Being a single phase EMI filter means this product is specifically designed to effectively eliminate electromagnetic interference in single-phase power systems, ensuring better performance and reliability of connected devices.
With a maximum operating temperature of 125°C, this EMI mains filter can withstand high temperatures, making it suitable for use in environments where heat dissipation is a concern.
The ability to operate at temperatures as low as -40°C makes this EMI mains filter versatile and suitable for use in both extreme cold and hot conditions.
The compact width of 17mm makes this EMI mains filter space-efficient and easy to integrate into different electronic devices or systems.
The 50Hz operating frequency of this EMI mains filter ensures compatibility with standard power systems, making it a versatile choice for various applications.
With a length of 23mm, this EMI mains filter has a balanced form factor that allows for easy installation and maintenance in different settings.
The tray packing method facilitates easy handling, storage, and transportation of multiple EMI mains filters, enhancing convenience for manufacturers and users alike.
Being designed for through-hole mounting simplifies the installation process of this EMI mains filter, providing a secure and stable fit in PCBs or enclosures.
The specified dimensions in millimeters and inches give a clear idea of the size and form factor of this EMI mains filter, allowing for precise integration and compatibility with existing setups.
With a rated current of 15A, this EMI mains filter can handle high current loads efficiently, making it suitable for power-hungry applications without the risk of overheating or malfunction.
The 25mm height of this EMI mains filter complements its overall compact design, ensuring that it can be easily accommodated in limited-space environments or enclosures.
EMI Mains Filters 7448031501 attributes and parameters. Explore more EMI Mains Filters devices from Wurth Elektronik
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Bytesonic Electronics
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Rugao Dachang Electronic
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
250APS12L
TE Connectivity
The TE Connectivity 250APS12L is a UL-approved EMI mains filter with a rated voltage of 520V and rated current of 250A. This three-phase filter operates at temperatures from -10°C to 50°C, making it suitable for panel mounting in various industrial applications requiring high-potential and low-leakage current protection.
SS11H-R10093-CH
KEMET Corporation
KEMET's SS11H-R10093-CH EMI Mains Filter offers 100 Mohm Min Insulation Resistance, 250V Rated Voltage, and 120°C Max Operating Temp. Ideal for single-phase EMI filtering applications with Through Hole Mounting, it ensures reliable performance in a compact L21.0xB20.5xH16.0 mm package.
FPP2-25-1/A
Schurter Ag
Schurter Ag's FPP2-25-1/A EMI Mains Filter is rated for 250V, 1A with approvals from UL, EN, IEC. It operates at 50/60Hz frequency, offers high pot of 2700V and max leakage current of 0.25mA. Ideal for applications requiring single-phase EMI filtering using through-hole mounting.
NAC-06-472-D
Cosel
The Cosel NAC-06-472-D is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 6A rated current. With a compact size of L92.0xB53.0xH41.0 (mm), it is ideal for DIN rail mounting applications requiring high pot of 2500V and max leakage current of 1mA at temperatures ranging from -40 to 85°C.
LF-202U-1
KEMET LF-202U-1 EMI Mains Filter has 300 Mohm Min Insulation Resistance, 250V Rated Voltage, and -20 to 55 °C Operating Temp. UL approved for PANEL MOUNT application in SINGLE PHASE systems with 60Hz freq.
SS26V-R100330
KEMET Corporation's SS26V-R100330 EMI Mains Filter is UL approved with 250V rated voltage and 1A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L26.0xB20.5xH30.5 mm. Ideal for single-phase EMI filtering applications in various electronic devices.
SS30V-400021
SS30V-400021 by KEMET Corp is a UL approved SINGLE PHASE EMI FILTER with 250V rated voltage, 4A current, and 100 Mohm insulation resistance. It operates b/w -25°C to 120°C and is ideal for EMI mains filtering applications due to its high pot of 500V.
CMS2-11-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Minimum Operating Temperature: -40 Cel; Dimensions: L8.89XB8.89XH6 (mm); Packing Method: TAPE AND REEL; Length: 8.89 mm;
CMS3-4-R
Eaton Corporation
The Eaton Corporation's CMS3-4-R EMI Mains Filter is a single-phase filter with UL approval. It features 4 terminals, rated for 3.95A current, and operates b/w -40°C to 160°C. Ideal for surface mount applications, it measures L11.43xB11.43xH6.0mm and uses Tin/Silver/Copper terminal finish.
FN2010-3-06
Schaffner Holding Ag
FN2010-3-06 by Schaffner Holding Ag is a UL, CSA, ENEC-14 approved EMI mains filter with 250V rated voltage. It operates at temperatures from -25°C to 100°C and has a max leakage current of 0.74mA. This single-phase filter is panel mountable and measures L43.5xB32.5xH24.3mm, making it ideal for applications requiring effective electromagnetic interference suppression in electrical systems.
16BCF10
TE Connectivity's 16BCF10 EMI Mains Filter is a THREE PHASE filter with UL and VDE approvals, rated for 277V and 16A. With a max operating temperature of 50°C and min of -10°C, it is ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
SU9VF-02100
Tokin
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Mounting Type: THROUGH HOLE MOUNT; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Height: 17 mm;
SS11VL-R06270
SS11VL-R06270 by KEMET Corp is a SINGLE PHASE EMI FILTER with 250V rated voltage and 0.6A rated current. It operates b/w -25°C to 75°C, offering 100 Mohm min insulation resistance. Ideal for EMI mains filtering applications due to its compact dimensions of L22.0xB14.5xH19.5 (mm).
SINGLE PHASE EMI FILTER; Rated Current: 3.95 A; Maximum Operating Temperature: 160 Cel; Mounting Type: SURFACE MOUNT; Manufacturer Series: CMS; Minimum Operating Temperature: -40 Cel;
20VR1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 10 MHz; Rated Current: 20 A; High Pot: 2250 V; Maximum Leakage Current: .4 mA; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
SSB11H-R13090
SINGLE PHASE EMI FILTER; Rated Current: 1.3 A; Mounting Type: THROUGH HOLE MOUNT; Operating Frequency (Hz): 50Hz; Maximum Operating Temperature: 343 Cel; Rated Voltage: 250 V;
CMS1-12-R
Eaton Corporation's CMS1-12-R is a UL-approved SINGLE PHASE EMI FILTER with 4 terminals. With dimensions of L9.4XB7.2XH2.6 (mm), it operates b/w -40 to 160 °C, suitable for surface mount applications at a rated current of 1.15 A.
B84111A0000A030
TDK
TDK's B84111A0000A030 is a 250V UL/CSA/ENEC-10 approved single-phase EMI mains filter with 3A rated current. With dimensions of L50xB45xH22.3 mm, it offers high pot of 2700V and max leakage current of 0.5mA. Ideal for panel mount applications at 50/60Hz operating frequency.
SS21V-R300013
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Minimum Operating Temperature: -25 Cel; Dimensions: L20.5XB16.5XH24.5 (mm)/L0.807XB0.65XH0.965 (inch); Height: 24.5 mm; Rated Voltage: 250 V;
15VT1
The TE Connectivity 15VT1 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 8 dB at min frequency and 35 dB at max frequency. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74482210002
Wurth Elektronik
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Additional Features: INDUCTANCE 0.175 MILLI HENRY; Dimensions: L18.5XB14.5XH22.0 (mm)/L0.728XB0.571XH0.866 (inch); Height: 22 mm; Mounting Type: THROUGH HOLE MOUNT;
744844221
Wurth Elektronik 744844221 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 12A current. It operates b/w -40°C to 125°C, ideal for EMI mains filtering applications. Compact at L28.0xB18.5xH33.0 (mm), it offers through-hole mounting for easy installation in various systems.
7448051804
Wurth Elektronik 7448051804 is a single-phase EMI filter with a rated voltage of 250V and current of 18A. It operates b/w -40°C to 125°C, suitable for ENEC-10; VDE approvals. Ideal for applications requiring effective mains filtering in compact spaces.
7448227005
Wurth Elektronik 7448227005 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 6.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications due to its compact L18.5XB14.5XH22.0 mm size and through-hole mounting type.
7448031002
Wurth Elektronik 7448031002 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 10A current. It operates b/w -40°C to 125°C, ideal for ENEC-10; VDE approved applications requiring EMI mains filtering.
7448030509
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Dimensions: L22.0XB13.5XH25.0 (mm)/L0.866XB0.531XH0.984 (inch); Maximum Operating Temperature: 125 Cel; Height: 25 mm; Rated Voltage: 250 V;
7448051012
SINGLE PHASE EMI FILTER; Rated Current: 10 A; Height: 33 mm; Rated Voltage: 250 V; Packing Method: CARTON; Width (mm): 23;
7448063801
Wuerth Elektronik & Kg 7448063801 is a single-phase EMI mains filter with 250V rated voltage and 38A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40°C to 125°C, and is suitable for applications requiring effective electromagnetic interference suppression in through-hole mounting setups.
744839010400
THREE PHASE EMI FILTER; Rated Current: 40 A; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Approvals (V): IEC; Packing Method: TRAY;
744834433
Wurth Elektronik 744834433 is a single-phase EMI mains filter with 4 terminals, rated voltage of 250V, and operating temperature range from -40°C to 125°C. It has a width of 28.0mm, length of 32.5mm, and height of 22mm. Ideal for applications requiring noise suppression in electrical systems at frequencies up to 50Hz with a rated current of 5A.
7448680120
SINGLE PHASE EMI FILTER; Rated Current: 12 A; Operating Frequency (Hz): 50Hz; Mounting Type: THROUGH HOLE MOUNT; Length: 27.5 mm; Rated Voltage: 250 V;
7448040707
SINGLE PHASE EMI FILTER; Rated Current: 7 A; Height: 28 mm; Maximum Operating Temperature: 125 Cel; Dimensions: L28.0XB19.0XH28.0 (mm)/L1.102XB0.748XH1.102 (inch); Terminal Finish: TIN COPPER;
7448040435
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e2; Approvals (V): ENEC-10; VDE; Terminal Finish: TIN COPPER;
744841414
Wurth Elektronik's 744841414 is a single-phase EMI mains filter with a rated voltage of 250V and max operating temperature of 125°C. It has approvals from ENEC-10, IEC, VDE and dimensions of L16.0xB7.5xH17.5 (mm). Ideal for applications requiring effective EMI filtering in electronic systems with a rated current of 4A.
7448014501
SINGLE PHASE EMI FILTER; Rated Current: 4.5 A; Mounting Type: THROUGH HOLE MOUNT; Length: 15 mm; Height: 16 mm; Maximum Operating Temperature: 125 Cel;
7448030417
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 13.5; Minimum Operating Temperature: -40 Cel; Approvals (V): ENEC-10; VDE; Operating Frequency (Hz): 50Hz;
744834407
SINGLE PHASE EMI FILTER; Rated Current: 3.5 A; Length: 32.5 mm; Terminal Finish: Tin (Sn) over Copper (Cu); Width (mm): 28.0; Rated Voltage: 250 V;
744844471
SINGLE PHASE EMI FILTER; Rated Current: 9 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Frequency (Hz): 50Hz; Minimum Operating Temperature: -40 Cel;
7448041104
SINGLE PHASE EMI FILTER; Rated Current: 11 A; Length: 28 mm; JESD-609 Code: e2; Terminal Finish: TIN COPPER; Approvals (V): ENEC-10; VDE;
7448030333
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Maximum Operating Temperature: 125 Cel; Length: 22 mm; Rated Voltage: 250 V; Mounting Type: THROUGH HOLE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved