Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE PHASE EMI FILTER;
Median Price
$11.840
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
< 1k
Newark
1+ parts
$3.780
100+ parts
1k+ parts
10k+ parts
-
Farnell
$9.990
$8.120
$7.730
Mouser Electronics
$10.150
$9.870
DigiKey
$14.920
$10.187
$9.450
Element14
$16.930
$15.840
$14.110
$13.550
Verical
TME
$11.490
$10.500
EMI Mains Filters SCF29XV-250-2R2A008JV attributes and parameters. Explore more EMI Mains Filters devices from KEMET Corporation
Filter Type:
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Transys Electronics
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
B84111F0000M110
TDK
The TDK B84111F0000M110 is a UL, CUL, ENEC-10 approved 250V single-phase EMI mains filter with 10A rated current. It offers a high pot of 2500V and max leakage current of 0.002mA. Ideal for panel mount applications due to its compact dimensions of L43.5xB35.0xH26.0mm, it operates at 50/60Hz frequency for effective noise suppression in electronic equipment.
FMAD-0932-2510
Schurter Ag
Schurter Ag's FMAD-0932-2510 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a 480V rated voltage. It operates at -25 to 100°C, has a 25A rated current, and offers high pot protection up to 3000V. Ideal for three-phase applications requiring effective filtering in industrial settings.
NBH-30-681-D
Cosel
The Cosel NBH-30-681-D is a single-phase EMI filter with a rated voltage of 250V. It has approvals from UL, CSA, VDE, and ENEC-10. With a max operating temperature of 85°C and a rated current of 30A, it is suitable for DIN rail mounting in various applications requiring effective EMI filtering.
FIL-1S-1-3A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Mounting Type: PANEL MOUNT; Approvals (V): IEC; UL; VDE; Height: 99 mm; Length: 99.5 mm;
30AYT6C
TE Connectivity
The TE Connectivity 30AYT6C is a UL, CSA, and VDE approved THREE PHASE EMI FILTER with insertion loss ranging from 29 dB to 60 dB. Rated for 250V and 30A, it operates at frequencies of 50/60Hz and offers high pot protection up to 1450V. Ideal for panel mounting applications in industrial settings due to its compact dimensions of L351.0xB141.5xH65.0 mm.
SC22-05-30J
KEMET Corporation
KEMET Corporation's SC22-05-30J EMI Mains Filter has a rated voltage of 250V, insulation resistance of 100 Mohm, and rated current of 5A. It is a single-phase filter with UL approval, operating b/w -25°C to 120°C. Ideal for applications requiring effective electromagnetic interference filtering in compact spaces.
RN214-2-02-4M2
Schaffner Holding Ag
The Schaffner Holding Ag RN214-2-02-4M2 EMI Mains Filter is UL, IEC, VDE, and ENEC-10 approved with a rated voltage of 300V. It operates at temperatures from -40 to 100°C and has a max current of 2A. This single-phase filter is designed for through-hole mounting applications.
CMS2-4-R
Eaton Corporation
Eaton Corporation's CMS2-4-R is a UL-approved single-phase EMI mains filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 2.8A. Ideal for surface mount applications due to its compact dimensions of L8.89xB8.89xH6.0 mm, it offers effective EMI filtering in various electronic devices.
1609989-3
TE Connectivity's 1609989-3 is a UL and VDE approved THREE PHASE EMI FILTER with 277V rated voltage, 30A current rating, and 50/60Hz operating frequency. Ideal for PANEL MOUNT applications due to its compact dimensions of L240.0xB50.0xH85.0 (mm).
B84144A0016R120
TDK B84144A0016R120 is a 3-phase EMI mains filter with approvals from UL, CUL, and ENEC-10. It has a rated voltage of 300V, rated current of 16A, and high pot of 2720V. Ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
3-103-983
Schurter Ag's 3-103-983 EMI Mains Filter is a single-phase filter with approvals from CSA, EN, IEC, and UL. It has a rated voltage of 250V, rated current of 10A, and max operating temperature of 100°C. Ideal for panel mounting applications in various industries requiring effective EMI filtering at frequencies of 50/60Hz.
SCF19XV-150-1R3A006JH
5500.2025
The Schurter Ag 5500.2025 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V and rated current of 16A. It operates b/w -25°C to 100°C, has high pot of 2700V, and max leakage current of 0.5mA. This single-phase filter with through-hole mount is ideal for applications requiring effective electromagnetic interference suppression.
SC-15-05J
KEMET Corporation's SC-15-05J is a UL-approved EMI mains filter with 100 Mohm min insulation resistance, rated for 250V and 15A. This single-phase filter operates b/w -25°C to 105°C, measuring L34.0xB23.0xH33.0 mm and is mounted through hole. Ideal for applications requiring effective electromagnetic interference suppression in compact spaces.
6VS1
TE Connectivity's 6VS1 EMI Mains Filter is a single-phase filter with UL, CSA, and VDE approvals. It offers insertion loss of 15 dB at 0.15 MHz and 40 dB at 2 MHz. With a rated voltage of 250V, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
FN351H-50-33
Schaffner Holding Ag's FN351H-50-33 is a 3-phase EMI filter with approvals from CSA and ENEC-14. It has a rated voltage of 520V, rated current of 57.7A, and operates at temperatures ranging from -25°C to 100°C. This panel mount filter is designed for applications requiring effective electromagnetic interference suppression in industrial settings.
20VR6
The TE Connectivity 20VR6 is a single-phase EMI filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V and rated current of 20A, it is ideal for applications requiring EMI mains filtering in electronic systems.
5500.2003
The Schurter Ag 5500.2003 EMI Mains Filter is UL, CUL, VDE, and ENEC-10 approved with a rated voltage of 250V. It has 5 terminals, operates at -25 to 85°C temperatures, and offers high pot of 2700V. Ideal for single-phase EMI filtering applications with a rated current of 4A and dimensions of L25.0xB25.0xH25.0 mm.
FMW-65-0002
Schurter Ag's FMW-65-0002 is a THREE PHASE EMI FILTER with a rated voltage of 440V. It has a max operating temperature of 100°C and a high pot of 3000V. This panel mount filter is suitable for applications requiring EMI mains filtering.
RN214-1.5-02-6M8
RN214-1.5-02-6M8 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 1.5A rated current. It operates b/w -40 to 100°C and has dimensions of L23.0xB15.5xH25.0 mm, suitable for single-phase EMI filtering applications in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved