Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RN122-4-02-1M8 by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved EMI mains filter with 300V rated voltage and 4A current. It operates b/w -40°C to 100°C, suitable for single-phase applications at 50/60Hz frequency. With dimensions of L28.0xB27.0xH16.5 mm, it's mounted through hole for effective electromagnetic interference suppression.
Median Price
$2.840
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.924
1k+ parts
$1.583
10k+ parts
$1.465
Mouser Electronics
$1.920
$1.620
$1.520
TE Connectivity
$5.170
-
Verical
Nova Conductors
$1.438
Vyrian
Advanced Electronics
$0.404
$0.368
$0.331
Netroflash
AZTECH Wire
$14.023
Glotronic Ltd.
Perfect Parts
Multiple approvals ensure that this product meets international safety standards and can be used in various regions with different regulations.
With a rated voltage of 300V, this EMI mains filter can handle high voltage applications with ease.
Single phase EMI filter design provides effective filtering of electromagnetic interference, ensuring clean power supply.
With a wide range of operating temperatures from -40°C to 100°C, this filter can be used in diverse environmental conditions.
Compact width of 27.0mm allows easy installation in tight spaces or crowded PCB layouts.
Compatible with standard 50/60Hz operating frequency, making it suitable for a wide range of electronic equipment.
A rated current of 4A ensures that the filter can handle moderate to high current loads without overheating.
Through hole mount design offers secure and reliable installation on PCBs, suitable for industrial applications where vibration or shock may be a concern.
The compact dimensions of L28.0 x B27.0 x H16.5 mm (L1.102 x B1.063 x H0.65 inch) make this filter versatile and easy to integrate into various electronic systems.
EMI Mains Filters RN122-4-02-1M8 attributes and parameters. Explore more EMI Mains Filters devices from Schaffner Holding Ag
Approvals (V):
Filter Type:
Height:
Length:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
Our modern society is becoming increasingly digitalized and electrified. Everything – from the smallest device to the largest system – depends on smart technology to function reliably and efficiently. All these technologies and solutions are ideas brought to life by innovative minds. But these inventions can be affected by electromagnetic interferences. At Schaffner, we are at the forefront of electromagnetic interference solutions. Our talented and knowledgeable employees work passionately to solve these challenges and drive the technological transformation of our society. And as the electromagnetic experts, we provide reliable solutions that reduce the complexity our customers are facing – freeing up their time to focus on their inventions. Backed by long-term investors that recognize the growth potential and the value of innovations in the field of electromagnetic compatibility, we share a vision for a more sustainable and electrified society and a way forward in generating value for all our stakeholders.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rfe International
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
CMS1-1-R
Eaton Corporation
Eaton Corporation's CMS1-1-R EMI Mains Filter is a UL approved single-phase filter with 4 terminals. It operates b/w -40°C to 160°C, rated at 7A. Ideal for surface mount applications, it measures L9.4xB7.2xH2.6mm and comes in tape and reel packaging.
RN214-1-02-15M
Schaffner Holding Ag
RN214-1-02-15M by Schaffner Holding Ag is a UL, IEC, VDE, ENEC-10 approved single-phase EMI mains filter with 300V rated voltage and 1A rated current. Operating at temperatures from -40°C to 100°C, it has dimensions of L23.0xB15.5xH25.0 mm and is ideal for applications requiring effective filtering of electromagnetic interference in electronic systems.
10VS1
The TE Connectivity 10VS1 is a UL, CSA, VDE approved EMI mains filter with insertion loss of 15-40 dB. Rated for 250V and 10A, it operates at -10 to 40°C with dimensions of L84.8xB52.8xH38.9mm. Ideal for single-phase applications requiring effective filtering up to 2MHz frequency range.
CMS1-12-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 1.15 A; Additional Features: INDUCTANCE 131 MICRO HENRY; Length: 9.4 mm; Width (mm): 7.2; Manufacturer Series: CMS;
10VR6
The TE Connectivity 10VR6 EMI Mains Filter has a rated voltage of 250V and insertion loss ranging from 5dB to 65dB. With approvals from UL, CSA, and VDE, it is suitable for single-phase applications with an operating frequency of 50/60Hz. This panel-mount filter measures L85.1xB52.6xH38.9mm and can handle a rated current of 10A while offering high pot protection up to 2250V.
SSR21NH-M30064
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Height: 14.5 mm; Width (mm): 23; Length: 23 mm; Rated Voltage: 250 V;
SSR10VS-08180
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Length: 23.5 mm; Rated Voltage: 250 V; Minimum Insulation Resistance: 100 Mohm; Mounting Type: THROUGH HOLE MOUNT;
SSRH7H-M06237
KEMET Corporation
SSRH7H-M06237 by KEMET Corp is a UL approved EMI mains filter with 250V rated voltage and 0.6A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C. Ideal for applications requiring high insulation resistance of 100 Mohm, such as industrial electronics and power supplies.
20VR1
The TE Connectivity 20VR1 is a single-phase EMI mains filter with UL, CSA, and VDE approvals. It offers insertion loss of 5 dB at min frequency and 65 dB at max frequency. With a rated voltage of 250V and rated current of 20A, it is ideal for panel mount applications in electronics to reduce electromagnetic interference.
5VR1
TE Connectivity's 5VR1 EMI Mains Filter offers UL, CSA, VDE approvals. With insertion loss ranging from 5 dB to 65 dB, it operates at 50/60Hz frequency and rated voltage of 250V. Ideal for single-phase applications with a rated current of 5A, this panel mount filter ensures efficient noise reduction in electronic systems.
RSEL-2005M
Tdk-lambda
SINGLE PHASE EMI FILTER; Rated Current: 5 A; Height: 30 mm; Maximum Leakage Current: 1 mA; Minimum Operating Temperature: -25 Cel; Rated Voltage: 250 V;
SSR10V-07330
KEMET Corporation's SSR10V-07330 is a UL approved EMI mains filter with 250V rated voltage and 0.7A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 120°C, and has a compact size of 18mm x 22mm x 13.5mm. Ideal for single-phase EMI filtering applications requiring high pot (500V) protection.
74482210002
Wuerth Elektronik & Kg
Wurth Elektronik 74482210002 is a single-phase EMI filter with 4 terminals, rated for 250V and 10A. Operating b/w -40°C to 125°C, it's ideal for applications requiring EMI mains filtering at a frequency of 50Hz. Mountable through holes, its compact size of L18.5xB14.5xH22.0 (mm) makes it suitable for various electronic devices.
EAC-10-102-D
Cosel
The Cosel EAC-10-102-D is a UL, CSA, VDE, and ENEC-10 approved single-phase EMI mains filter with a rated voltage of 250V and rated current of 10A. It operates at temperatures ranging from -40 to 85°C and has a high pot of 2500V. Ideal for DIN rail mounting applications due to its compact dimensions of L85.0xB39.0xH30.0mm.
SCR-050-0R9A070JH
KEMET Corporation's SCR-050-0R9A070JH is a SINGLE PHASE EMI FILTER with 250V rated voltage and 5A current. It offers 100 Mohm insulation resistance, operates b/w -25°C to 50°C, and has dimensions of L29.0xB23.0xH27.0 mm. Ideal for EMI mains filtering applications with through hole mounting requirements.
20VSK6
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: 30 MHz; Rated Current: 20 A; Length: 113.3 mm; Rated Voltage: 120 V; Insertion Loss At Maximum Frequency: 48 dB;
FN406-8.4-02
Schaffner Holding Ag's FN406-8.4-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 8.4A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2000V. Ideal for applications requiring through-hole mounting in electronics to reduce electromagnetic interference on mains power lines.
SS26V-R100330
KEMET Corporation's SS26V-R100330 EMI Mains Filter is UL approved with 250V rated voltage and 1A rated current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 120°C, and has dimensions of L26.0xB20.5xH30.5 mm. Ideal for single-phase EMI filtering applications in various electronic devices.
3EDP
SINGLE PHASE EMI FILTER; Maximum Frequency: 5 MHz; Rated Current: 3 A; Operating Frequency (Hz): 50/60Hz; Dimensions: L36.6XB31.5XH24.15 (mm)/L1.44XB1.24XH0.95 (inch); Minimum Frequency: .15 MHz;
ESP-03-221
Cosel ESP-03-221 is a UL, CSA, VDE, ENEC-10 approved single-phase EMI filter with 250V rated voltage and 3A rated current. It operates at -40 to 85°C, offers high pot of 2500V, and has max leakage current of 0.05mA. Ideal for chassis mount applications due to its compact L85.0xB39.0xH30.0mm size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RN122-1-02
The Schaffner Holding Ag RN122-1-02 EMI Mains Filter is a single-phase filter with UL and VDE approvals, rated for 250V and 1A. Operating temperatures range from -40°C to 125°C, suitable for through-hole mounting in applications requiring effective electromagnetic interference suppression at 50/60Hz frequencies.
RN122-4-02-3M3
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Minimum Operating Temperature: -40 Cel; Height: 16.5 mm; Width (mm): 27.0; Approvals (V): UL; IEC; VDE; ENEC-10;
RN122-4-02
SINGLE PHASE EMI FILTER; Rated Current: 4 A; Width (mm): 27; Height: 16.5 mm; Length: 28 mm; Maximum Operating Temperature: 125 Cel;
RN122-0.5-02-56M
SINGLE PHASE EMI FILTER; Rated Current: .5 A; Operating Frequency (Hz): 50/60Hz; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Rated Voltage: 300 V;
RN122-0.6-02-47M
SINGLE PHASE EMI FILTER; Rated Current: .6 A; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch); Width (mm): 27.0; Mounting Type: THROUGH HOLE MOUNT;
RN122-0.8-02-39M
SINGLE PHASE EMI FILTER; Rated Current: .8 A; Maximum Operating Temperature: 100 Cel; Width (mm): 27.0; Mounting Type: THROUGH HOLE MOUNT; Height: 16.5 mm;
RN122-1-02-10M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Length: 28 mm; Dimensions: L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch); Width (mm): 27.0; Rated Voltage: 300 V;
RN122-1-02-18M
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 27.0; Maximum Operating Temperature: 100 Cel; Dimensions: L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch); Length: 28 mm;
RN122-1.5-02-10M
SINGLE PHASE EMI FILTER; Rated Current: 1.5 A; Minimum Operating Temperature: -40 Cel; Width (mm): 27.0; Length: 28 mm; Approvals (V): UL; IEC; VDE; ENEC-10;
RN122-2-02-5M0
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Rated Voltage: 300 V; Approvals (V): UL; IEC; VDE; ENEC-10; Mounting Type: THROUGH HOLE MOUNT; Length: 28 mm;
RN122-2-02-6M8
SINGLE PHASE EMI FILTER; Rated Current: 2 A; Dimensions: L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch); Maximum Operating Temperature: 100 Cel; Operating Frequency (Hz): 50/60Hz; Length: 28 mm;
RN122-2.5-02-5M6
SINGLE PHASE EMI FILTER; Rated Current: 2.5 A; Operating Frequency (Hz): 50/60Hz; Approvals (V): UL; IEC; VDE; ENEC-10; Dimensions: L28.0XB27.0XH16.5 (mm)/L1.102XB1.063XH0.65 (inch); Height: 16.5 mm;
RN122-3-02-4M5
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Maximum Operating Temperature: 100 Cel; Length: 28 mm; Rated Voltage: 300 V; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved