Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RP400200-100-S by Astrodyne Tdi is a 480V THREE PHASE EMI FILTER with 200A rated current. It has approvals from EN and UL, operates at -25 to 100 °C, and offers high pot of 3500V. Ideal for panel mount applications requiring efficient filtering in industrial settings.
Median Price
$792.608
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Master Electronics
1+ parts
$659.450
100+ parts
-
1k+ parts
10k+ parts
Verical
DigiKey
$1,008.850
Nova Conductors
$581.332
DigiKey Marketplace
$710.660
IBS Electronics
$942.957
Vyrian
AZTECH Wire
$12.970
Aranea Global
$569.706
$546.917
Having both EN and UL approvals ensures that this EMI mains filter meets safety and quality standards, making it a reliable choice for your application.
With a high rated voltage of 480V, this EMI mains filter is suitable for handling industrial-level power requirements.
Being a three-phase EMI filter, this product is capable of effectively reducing electromagnetic interference in power systems with three-phase connections.
The high maximum operating temperature of 100°C ensures that this EMI mains filter can withstand elevated temperatures in industrial environments, enhancing its durability.
The low minimum operating temperature of -25°C allows this EMI mains filter to function effectively in cold environments, making it versatile for various operating conditions.
With a width of 168mm, this EMI mains filter has a compact design that is space-efficient when mounted on panels or enclosures.
The operating frequency range of 50-60Hz covers standard power frequencies, ensuring compatibility with most power systems and equipment.
Measuring 330mm in length, this EMI mains filter has a suitable size for installation in various applications without taking up excessive space.
The high potential test value of 3500V indicates the robust insulation and isolation capabilities of this EMI mains filter, providing safety assurance in high-voltage applications.
With a low maximum leakage current of 1mA, this EMI mains filter helps prevent excessive current leakage, contributing to the overall efficiency and safety of the power system.
Featuring a panel mount design, this EMI mains filter can be easily integrated into control panels or enclosures for convenient installation and maintenance.
Rated at 200A, this EMI mains filter is capable of handling high current loads while effectively filtering out electromagnetic interference, ensuring the smooth operation of connected equipment.
With a height of 114mm, this EMI mains filter has a compact profile that allows for flexible mounting options and space-saving installation in various applications.
EMI Mains Filters RP400200-100-S attributes and parameters. Explore more EMI Mains Filters devices from Astrodyne Tdi
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Manufacturer Series:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
Astrodyne TDI develops power technologies and products that people depend upon, to enhance, protect, and save lives. Our ultimate goal is to maintain our position as a world-renowned leader in the development of power conversion solutions that safeguard and enrich the lives of people everywhere. We strive to be the go-to partner and employer of choice, recognized for our exceptional growth and business achievements. At Astrodyne TDI, we strive to not only meet but surpass our customers' expectations. With a focus on quality, exceptional customer service, employee development, and innovation, we are dedicated to maintaining the effectiveness of our Quality Management System and embracing a mindset of continual improvement.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Asi Semiconductor
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Crimson Semiconductor
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Semiconductor Technology
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Digitron Semiconductors
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSHB21HS-R10300
KEMET Corporation
KEMET Corporation's SSHB21HS-R10300 is a UL approved EMI mains filter with 250V rated voltage and 1A current. Featuring single-phase filter type, it operates b/w -25°C to 120°C. Ideal for applications requiring high insulation resistance and through-hole mounting in compact spaces.
FMBC-A91G-J310
Schurter Ag
Schurter Ag's FMBC-A91G-J310 is a UL, CUL, VDE approved EMI mains filter with 480V rated voltage. It offers 130A rated current and operates at -25 to 100°C. Ideal for three-phase applications, it has a compact size of L240.0xB90.0xH150.0mm for panel mounting in industrial settings.
FN2030-1-06
Schaffner Holding Ag
FN2030-1-06 by Schaffner Holding Ag is a SINGLE PHASE EMI FILTER with approvals from UL, CSA, and ENEC-14. It has a rated voltage of 250V, rated current of 1.1A, and operates at temperatures ranging from -25°C to 100°C. Ideal for chassis mount applications requiring effective electromagnetic interference mains filtering.
SS20H-R10100
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Rated Voltage: 250 V; Length: 22 mm; High Pot: 2400 V; Mounting Type: THROUGH HOLE MOUNT;
20SRBS1-W
TE Connectivity
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Mounting Type: PANEL MOUNT; Maximum Operating Temperature: 40 Cel; Minimum Operating Temperature: -10 Cel;
7448014501
Wuerth Elektronik & Kg
Wurth Elektronik 7448014501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 4.5A rated current. It operates b/w -40 to 125 °C, suitable for EMI mains filtering applications. Compact at L15.0xB7.5xH16.0 (mm), it offers through-hole mounting and TIN COPPER terminal finish for efficient use in various electronic devices.
FN406B-6-02
Schaffner Holding Ag's FN406B-6-02 EMI Mains Filter is a single-phase filter with 250V rated voltage and 6A rated current. It has approvals from UL, CSA, and ENEC-14, operates at -25 to 100°C, and offers high pot of 2500V. Ideal for applications requiring through-hole mounting in various industries.
SSRH7H-M04596
KEMET Corporation's SSRH7H-M04596 is a UL approved EMI mains filter with 100 Mohm insulation resistance. It operates at temperatures ranging from -25°C to 120°C and has a rated voltage of 250V. This single-phase filter, with a rated current of 0.4A, is designed for through-hole mounting applications.
810912010112
810912010112 by Wurth Elektronik is a SINGLE PHASE EMI FILTER with a rated voltage of 250V and rated current of 10A. It has approvals from CSA, ENEC-10, IEC, UL, VDE and operates at temperatures ranging from -25°C to 100°C. Ideal for PANEL MOUNT applications requiring effective EMI mains filtering in various electronic systems.
1-6609028-9
TE Connectivity 1-6609028-9 is a UL, CSA, VDE approved EMI mains filter with 6dB insertion loss at 0.15MHz and 50dB at 30MHz. It operates at 50/60Hz frequency, rated for 250V and 20A current. Ideal for panel mount applications in electronics to reduce electromagnetic interference.
SN10-300J
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Packing Method: TRAY; Width (mm): 16; Length: 23 mm; Minimum Operating Temperature: -55 Cel;
B82722-A2102-N1
TDK
TDK's B82722-A2102-N1 is a 250V rated SINGLE PHASE EMI FILTER with 1A current. It has approvals from EN, UL, VDE and operates at 50Hz frequency. Ideal for EMI mains filtering applications due to its compact size and through-hole mounting type.
6ET1
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .5 MHz; Rated Current: 6 A; Minimum Frequency: .01 MHz; Manufacturer Series: T; Additional Features: 1/4 INCH QUICK CONNECT TERMINAL;
SS26V-R100330
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Height: 30.5 mm; Terminal Finish: NOT SPECIFIED; Dimensions: L26.0XB20.5XH30.5 (mm)/L1.024XB0.807XH1.201 (inch); Operating Frequency (Hz): 50Hz;
SU9V-02080
SINGLE PHASE EMI FILTER; Rated Current: .2 A; Terminal Finish: NOT SPECIFIED; Mounting Type: THROUGH HOLE MOUNT; High Pot: 500 V; Length: 17 mm;
16BCF6R
TE Connectivity's 16BCF6R is a 480V, 16A THREE PHASE EMI Filter with max leakage current of 6.9mA. Ideal for panel mounting, it operates b/w -10°C to 40°C at 50Hz, providing effective EMI suppression in industrial applications.
30DKCS5B
Delta Electronics
30DKCS5B by Delta Electronics is a single-phase EMI filter with a rated voltage of 250V and a max leakage current of 2mA. It is UL, CSA, and VDE approved and has a rated current of 30A. This panel mount filter is suitable for applications requiring EMI mains filtering.
16BCF10
TE Connectivity's 16BCF10 EMI Mains Filter is a THREE PHASE filter with UL and VDE approvals, rated for 277V and 16A. With a max operating temperature of 50°C and min of -10°C, it is ideal for panel mounting applications requiring effective filtering at 50/60Hz frequency.
LDFL039172VJUV0E
Nippon Chemi-con
THREE PHASE EMI FILTER;
B82722S0193A041
TDK's B82722S0193A041 is a 48V single-phase EMI mains filter with 19A rated current. It operates b/w -40°C to 125°C, suitable for IEC approvals and surface mount installation. Ideal for applications requiring effective filtering at 50/60Hz frequency in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RP400150-100-S
Astrodyne Tdi
THREE PHASE EMI FILTER; Rated Current: 150 A; Maximum Leakage Current: 1 mA; High Pot: 3500 V; Mounting Type: PANEL MOUNT; Approvals (V): EN; UL;
RP400300-100-S
THREE PHASE EMI FILTER; Rated Current: 300 A; High Pot: 3500 V; Maximum Operating Temperature: 100 Cel; Approvals (V): EN; UL; Length: 330 mm;
RP40045-2000-S
THREE PHASE EMI FILTER; Rated Current: 45 A; Maximum Operating Temperature: 100 Cel; Height: 83 mm; Rated Voltage: 480 V; Approvals (V): EN; UL;
RP400150-1000-S
THREE PHASE EMI FILTER; Rated Current: 150 A; Rated Voltage: 480 V; Width (mm): 168; High Pot: 3500 V; Minimum Operating Temperature: -25 Cel;
RP400150-10-S
THREE PHASE EMI FILTER; Rated Current: 150 A; Maximum Leakage Current: .1 mA; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -25 Cel; Width (mm): 168;
RP400100-100-S
THREE PHASE EMI FILTER; Rated Current: 100 A; Maximum Leakage Current: 1 mA; Minimum Operating Temperature: -25 Cel; Operating Frequency (Hz): 50-60Hz; Approvals (V): EN; UL;
RP400150-2000-S
THREE PHASE EMI FILTER; Rated Current: 150 A; High Pot: 3500 V; Length: 254 mm; Height: 114 mm; Manufacturer Series: RP400;
RP400200-0-S
THREE PHASE EMI FILTER; Rated Current: 200 A; Manufacturer Series: RP400; Length: 330 mm; Approvals (V): EN; UL; Maximum Leakage Current: 0 mA;
RP400200-10-S
THREE PHASE EMI FILTER; Rated Current: 200 A; Length: 330 mm; Mounting Type: PANEL MOUNT; Manufacturer Series: RP400; Maximum Operating Temperature: 100 Cel;
RP400200-1000-S
THREE PHASE EMI FILTER; Rated Current: 200 A; Mounting Type: PANEL MOUNT; Rated Voltage: 480 V; High Pot: 3500 V; Operating Frequency (Hz): 50-60Hz;
RP400200-2000-S
THREE PHASE EMI FILTER; Rated Current: 200 A; Minimum Operating Temperature: -25 Cel; Approvals (V): EN; UL; High Pot: 3500 V; Maximum Leakage Current: 20 mA;
RP40030-10-S
THREE PHASE EMI FILTER; Rated Current: 30 A; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 100 Cel; Manufacturer Series: RP400;
RP40030-1000-S
THREE PHASE EMI FILTER; Rated Current: 30 A; Mounting Type: PANEL MOUNT; Length: 127 mm; Operating Frequency (Hz): 50-60Hz; Approvals (V): EN; UL;
RP40035-10-S
THREE PHASE EMI FILTER; Rated Current: 35 A; Width (mm): 84; Mounting Type: PANEL MOUNT; Height: 45 mm; High Pot: 3500 V;
RP40035-100-S
THREE PHASE EMI FILTER; Rated Current: 35 A; Minimum Operating Temperature: -25 Cel; Rated Voltage: 480 V; Mounting Type: PANEL MOUNT; High Pot: 3500 V;
RP40040-100-S
THREE PHASE EMI FILTER; Rated Current: 40 A; Height: 57 mm; Width (mm): 108; Approvals (V): EN; UL; Length: 108 mm;
RP40060-0-S
THREE PHASE EMI FILTER; Rated Current: 60 A; Maximum Leakage Current: 0 mA; Width (mm): 127.0; Approvals (V): EN; UL; Height: 89 mm;
RP40060-10-S
THREE PHASE EMI FILTER; Rated Current: 60 A; High Pot: 3500 V; Maximum Operating Temperature: 100 Cel; Approvals (V): EN; UL; Height: 89 mm;
RP40060-1000-S
THREE PHASE EMI FILTER; Rated Current: 60 A; Rated Voltage: 480 V; Width (mm): 127.0; Length: 203 mm; Mounting Type: PANEL MOUNT;
RP40065-0-S
THREE PHASE EMI FILTER; Rated Current: 65 A; Maximum Leakage Current: 0 mA; Length: 184 mm; Width (mm): 140; High Pot: 3500 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved