Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
THREE PHASE EMI FILTER; Rated Current: 200 A; Manufacturer Series: RP400; Length: 330 mm; Approvals (V): EN; UL; Maximum Leakage Current: 0 mA;
Median Price
$710.660
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
DigiKey Marketplace
EMI Mains Filters RP400200-0-S attributes and parameters. Explore more EMI Mains Filters devices from Astrodyne Tdi
Approvals (V):
Filter Type:
Height:
High Pot:
Maximum Leakage Current:
Length:
Manufacturer Series:
Mounting Type:
Operating Frequency (Hz):
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Width (mm):
Astrodyne TDI develops power technologies and products that people depend upon, to enhance, protect, and save lives. Our ultimate goal is to maintain our position as a world-renowned leader in the development of power conversion solutions that safeguard and enrich the lives of people everywhere. We strive to be the go-to partner and employer of choice, recognized for our exceptional growth and business achievements. At Astrodyne TDI, we strive to not only meet but surpass our customers' expectations. With a focus on quality, exceptional customer service, employee development, and innovation, we are dedicated to maintaining the effectiveness of our Quality Management System and embracing a mindset of continual improvement.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
FN3025HL-20-71
Schaffner Holding Ag
Schaffner Holding Ag's FN3025HL-20-71 EMI Mains Filter is UL, CSA, and ENEC-14 approved with a rated voltage of 520V. It operates at temperatures from -25°C to 100°C, has a max leakage current of 0.4mA, and a rated current of 20A. This three-phase filter is mounted on DIN rail for applications requiring effective EMI filtering in industrial settings.
30DKCS5
Delta Electronics
The Delta Electronics 30DKCS5 is a single-phase EMI filter with UL, CSA, and VDE approvals. It has a rated voltage of 250V and a max leakage current of 2mA. With dimensions of L74.7xB51.8xH39.1mm, it is ideal for panel mount applications in electrical systems requiring up to 30A of current.
CMS1-6-R
Cooper Electronic Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3.1 A; Length: 9.4 mm; Mounting Type: SURFACE MOUNT; Dimensions: L9.4XB7.2XH2.6 (mm); Maximum Operating Temperature: 160 Cel;
20SRB1-Y
TE Connectivity
SINGLE PHASE EMI FILTER; Rated Current: 20 A; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 40 Cel;
30VSK6
TE Connectivity's 30VSK6 EMI Mains Filter is UL, CUL, VDE approved with a rated voltage of 250V. It features a single-phase filter type, 30A rated current, and operates at temperatures from -10 to 40°C. Ideal for panel mounting applications requiring effective electromagnetic interference filtering.
AFH461
Infineon Technologies
SINGLE PHASE EMI FILTER; Rated Current: 3 A; Height: .325 mm; Screening Level: 38535Q/M;38534H;883B; Mounting Type: PANEL MOUNT; Minimum Operating Temperature: -55 Cel;
SSR10H-10170
Tokin
SINGLE PHASE EMI FILTER; Rated Current: 1 A; Width (mm): 18; Length: 22 mm; Mounting Type: THROUGH HOLE MOUNT; Height: 13.5 mm;
B84131-M1-G135
TDK
B84131-M1-G135 by TDK is a UL, CSA, VDE approved EMI mains filter with 250V rated voltage and 35A rated current. It features a three-phase filter type, high pot of 2700V, and max leakage current of 3.5mA. Ideal for panel mount applications in industrial settings due to its compact dimensions of L149xB104xH80mm.
6EHT3
Corcom
SINGLE PHASE EMI FILTER; Maximum Frequency: .15 MHz; Rated Current: 6 A; Approvals (V): UL; CSA; VDE; Maximum Leakage Current: .002 mA; Insertion Loss At Minimum Frequency: 16 dB;
RD7137-6-12M0
DATA LINE FILTER;
7448042001
Wuerth Elektronik & Kg
Wurth Elektronik 7448042001 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 20A rated current. It operates b/w -40 to 125 °C, has high pot of 1500V, and dimensions of L30.0xB19.0xH28.0 mm. Ideal for EMI mains filtering in various applications due to its through-hole mounting type and compact size.
FN406-6-02
The Schaffner Holding Ag FN406-6-02 is a UL, CSA, ENEC-14 approved single-phase EMI mains filter with 250V rated voltage and 6A rated current. With dimensions of L45.0xB15.0xH28.0 (mm), it operates at temperatures from -25 to 100 °C and has a high pot of 2000V. Ideal for applications requiring effective electromagnetic interference filtering in electronic systems.
SS11VL-R22020
SINGLE PHASE EMI FILTER; Rated Current: 2.2 A; Width (mm): 14.5; Operating Frequency (Hz): 50Hz; Rated Voltage: 250 V; Height: 19.5 mm;
SCF25XV-240-2R0A006JV
KEMET Corporation
SINGLE PHASE EMI FILTER;
SSHB21HS-18046
KEMET Corporation's SSHB21HS-18046 is a UL approved EMI mains filter with 250V rated voltage and 1.8A current. It offers high insulation resistance of 100 Mohm, operates b/w -25°C to 130°C, and has a compact size of 23mm x 26mm x 15.5mm. Ideal for applications requiring single-phase EMI filtering in various electronic devices.
FIL-1S-1-6A-230AC-PT
Phoenix Contact
SINGLE PHASE EMI FILTER; Rated Current: 6 A; Mounting Type: PANEL MOUNT; Rated Voltage: 230 V; Height: 99 mm; Length: 99.5 mm;
7448040707
Wurth Elektronik 7448040707 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 7A rated current. With dimensions of L28.0XB19.0XH28.0 (mm), it is ideal for EMI mains filtering applications in electronics, ensuring efficient operation at temperatures ranging from -40 to 125 °C.
7448013501
Wurth Elektronik 7448013501 is a SINGLE PHASE EMI FILTER with 250V rated voltage and 3.5A rated current. It has approvals from ENEC-10 and VDE, operates b/w -40 to 125 °C, suitable for applications requiring EMI mains filtering in through-hole mounting setups.
B82722A2301N001
The TDK B82722A2301N001 is a UL, EN, IEC, VDE approved EMI mains filter with 250V rated voltage and 0.3A rated current. It features single-phase filtering, 50/60Hz operating frequency, and tin over nickel terminal finish. Ideal for applications requiring effective electromagnetic interference suppression in electronic devices.
PLA10AN3030R4R2B
Murata Manufacturing
Murata Manufacturing's PLA10AN3030R4R2B is a SINGLE PHASE EMI FILTER with 300V rated voltage and 100 Mohm min insulation resistance. Operating b/w -25 to 120 °C, it has a 0.4A rated current and dimensions of L18.0xB16.0xH17.5 mm. Ideal for EMI mains filtering applications with through-hole mounting requirement.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Astrodyne Tdi
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved