Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Knowles Precision Devices L185XF4S is a Ceramic LPF filter with a center frequency of 18.5 GHz and max insertion loss of 2.2 dB. Operating b/w -55°C to 125°C, it has an impedance of 50Ω and VSWR of 1.4, making it ideal for panel mount applications in RF systems.
Median Price
$157.125
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$157.120
100+ parts
$118.230
1k+ parts
-
10k+ parts
DigiKey
$157.130
$116.638
RFMW
Nova Conductors
$130.000
Vyrian
Corohmni
$0.520
AZTECH Wire
$0.990
$0.950
$0.930
$0.910
Aztec Data Supply Inc.
$2.210
Continental Prestige Electronics
$127.400
Netroflash
Argo Parts USA
Ceramic material provides excellent stability and durability, ensuring reliable performance over time.
Can operate in high-temperature environments without risk of damage, making it suitable for a variety of applications.
Capable of functioning in extremely low temperatures, offering versatility in different operating conditions.
Compact size allows for easy integration into existing systems without occupying a large amount of space.
Low insertion loss ensures minimal signal degradation, maintaining signal quality in the transmission process.
Designed for high-frequency applications, providing precise filtering at the specified frequency range.
Low VSWR indicates efficient power transfer and minimal reflected energy, optimizing overall system performance.
Compact design facilitates easy installation and integration into various electronic devices or systems.
Panel mount option simplifies installation and ensures secure attachment to surfaces for stable operation.
Common impedance value allows for easy integration with standard RF systems, ensuring compatibility.
Low-profile design enables flexible placement within devices or systems without adding significant height.
Ceramic Filters L185XF4S attributes and parameters. Explore more Ceramic Filters devices from Knowles Precision Devices
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Voltage Standing Wave Ratio:
Width (mm):
As a division of Knowles Corporation, Knowles Precision Devices (KPD), focuses on production of a wide variety of highly engineered Capacitors and Microwave to Millimeter Wave components for use in critical applications in military, medical, electric vehicle, and 5G market segments. Radar, pacemakers, MRI equipment, satellites, airplanes, electric vehicles and mobile phone base stations are just a few of the places you will find our products. Our products can be found in every corner of the world, from 8000ft below the earth’s surface to orbiting 254 miles above us on the ISS. We are a Specialty Components manufacturer, which means we choose to take on the complex challenges that come with High Reliability, High Temperature, High Performance and High Frequency solutions. This is built on our commitment to innovation, whether it be our ongoing creativity in manufacturing high performance multi-layer ceramic capacitors, or our unique ceramic formulations that allow us to provide the highest performance-for-footprint mmWave filters available
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
Electronic Devices
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
08055C104KAT4A
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Cheng-yi Electronic
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LFL182G54TC1B838
Murata Manufacturing
Murata Manufacturing's LFL182G54TC1B838 is a Ceramic LPF filter with 2545 MHz center frequency, 0.43 dB insertion loss, and 50 OHM impedance. Ideal for surface mount applications in electronics, it operates b/w -40 to 85 °C with a max power input of 3 W.
HFCN-880+
Mini-circuits
The Mini-circuits HFCN-880+ is a Ceramic HPF filter with 40 dB attenuation at 380 kHz and 20 dB at 240 kHz. Operating from -55 to 100°C, it has a VSWR of 1.5 and insertion loss of 3 dB at 880 MHz. Ideal for surface mount applications in RF systems requiring precise frequency filtering.
LFCN-1700D
LFCN-1700D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 4450 kHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter has low insertion loss of 3 dB and can handle an average input power of 10 W.
LFB185G54CGLD602
Murata Manufacturing's LFB185G54CGLD602 is a Ceramic BPF filter with 1dB max insertion loss, 5425 MHz center frequency, and 85°C max operating temp. Ideal for applications requiring a compact (1.6mm x 0.8mm x 0.65mm) and high-performance filter in the 50Ω impedance range.
CFWLA455KHFA-B0
Golledge Electronics
CERAMIC BPF; Length: 11.5 mm; Dimensions: L11.5XB7.5XH8 (mm); Additional Features: BULK; HIGH SELECTIVITY; Width (mm): 7.5; Maximum Insertion Loss: 6 dB;
BFCN-3085A+
The Mini-circuits BFCN-3085A+ is a Ceramic BPF filter with 4 terminals, operating from -55 to 100°C. It offers a max insertion loss of 2.5 dB at 3085 MHz and VSWR of 3, suitable for surface mount applications in RF circuits with 50 Ohm impedance.
LFCN-1800+
LFCN-1800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 300000 kHz. With a center frequency of 2125 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters in the 50 OHM impedance range.
HFCN-2700+
The Mini-circuits HFCN-2700+ is a Ceramic HPF filter with 40 dB attenuation at 1 MHz and 20 dB at 700 kHz. With a center frequency of 2500 MHz, it has a max insertion loss of 3 dB. Ideal for RF applications requiring high-frequency filtering in compact designs.
LFCN-1800D-1+
LFCN-1800D-1+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 875 MHz. With a center frequency of 2125 MHz and insertion loss of 1 dB, it's ideal for RF applications requiring precise filtering in the range of 425-875 MHz. This surface-mount filter operates b/w -55°C to 100°C, making it suitable for various communication systems.
LFCN-1700
The Mini-circuits LFCN-1700 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter provides low insertion loss of 3 dB and can handle an average input power of 10 W.
LFCN-6000+
LFCN-6000+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 6800 MHz. With a VSWR of 1.3, it operates b/w -55 to 100 °C and has a compact size of L3.2xB1.6xH0.94 mm, making it ideal for RF applications requiring precise filtering in limited space.
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
LFCN-800D+
LFCN-800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 9 W efficiently.
HFCN-880D
The Mini-circuits HFCN-880D is a Ceramic HPF filter with 4 terminals, offering attenuation up to 40 dB at 380 kHz. With a center frequency of 880 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring high-frequency filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50Ω and can handle an average input power of 7W.
SFSKA6M50CF00-R3
Murata Manufacturing's SFSKA6M50CF00-R3 is a Ceramic BPF filter with 3 terminals, gold finish. It operates b/w -20°C to 80°C, has 6dB insertion loss at 6.5MHz. Ideal for applications requiring a surface mount ceramic filter with an impedance of 470Ω.
LFCN-1000
LFCN-1000 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
SFSRA6M00DF00-B0
Murata Manufacturing's SFSRA6M00DF00-B0 is a Ceramic BPF filter with 20 dB attenuation at 6 MHz. Featuring 6 dB max insertion loss, it has dimensions of L10xB4xH7 mm and I/O impedance of 470 OHM. Ideal for applications requiring precise filtering at high frequencies.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
7000BP15A1600E-AEC
Johanson Dielectrics
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Packing Method: TR; Maximum No. of Sections: 1;
CFM455A
Murata Manufacturing's CFM455A is a Ceramic BPF filter with 60 dB attenuation at 30 kHz. With a center frequency of 0.455 MHz, it offers 3 dB max insertion loss and dimensions of L20xB7.5xH10.5 mm. Ideal for applications requiring precise filtering in through-hole mounting setups with an I/O impedance of 1000 OHM OHM OHM.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Knowles Precision Devices
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved