Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFCN-1800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 300000 kHz. With a center frequency of 2125 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters in the 50 OHM impedance range.
Median Price
$13.615
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
DigiKey
1+ parts
$13.280
100+ parts
$4.176
1k+ parts
$3.504
10k+ parts
$2.988
Mouser Electronics
$13.950
$4.040
$3.140
$2.990
DF Sales Co.
$5.600
-
Chip Stock
Bristol Electronics
Vyrian
Semi Source
Nova Conductors
Lantek
Component Sense
EPE Components Inc.
Goldney Electronics S.L.
Manoshevitz Elec. Sales
Connect4Technologies Inc.
Connector Distribution Corp
Right Parts Inc.
Prism Electronics
EZ Electronic Parts
Cogito LLC
Speed Components Ltd
Perfect Parts
Continental Prestige Electronics
Kepictronics
Argo Parts USA
Benley Electronics
S.R.D Solutions
Aranea Global
GreenTree Electronics
iodParts Technologies Inc.
Speed Components Ltd (Excess)
The ceramic low pass filter design provides high performance and reliability for filtering high frequency signals.
High attenuation at the maximum frequency ensures effective signal filtering and noise reduction.
With a maximum operating temperature of 100°C, this filter can withstand high temperature environments.
The ability to operate at temperatures as low as -55°C makes this filter suitable for a wide range of applications.
The filter provides effective attenuation at a low frequency of 300000 kHz, ensuring comprehensive signal filtering.
The matte tin finish with nickel barrier provides corrosion resistance and enhances the durability of the filter.
The compact width of 1.6 mm makes this filter suitable for space-constrained applications.
Low insertion loss of 3 dB ensures minimal signal loss during filtering.
The center/cutoff frequency of 2125 MHz indicates the filter's capability to effectively attenuate signals beyond this frequency.
A VSWR of 1.2 indicates low signal reflection and efficient signal transmission through the filter.
The compact length of 3.2 mm further contributes to the filter's space-saving design.
Having a minimum of 7 sections allows for precise tuning and customization of the filter's frequency response.
The maximum of 7 sections ensures that the filter can achieve the desired attenuation characteristics.
With an average input power of 10 W, this filter can handle high-power signals effectively.
The surface mount design simplifies installation and integration of the filter into electronic circuits.
The standard impedance of 50 ohms ensures compatibility with various RF systems and components.
The compact dimensions make this filter easy to incorporate into designs with limited space.
The filter provides significant attenuation at a high frequency of 375000 kHz, ensuring effective signal suppression.
Even at the lowest frequency, the filter offers a high attenuation of 20 dB for comprehensive signal filtering.
The low height profile of 0.94 mm contributes to the overall compactness of the filter.
Ceramic Filters LFCN-1800+ attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Width (mm):
LFCN-1800+ Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification_2024_03_08 (PDF)
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Diotec Semiconductor Ag
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Synsemi
LFCN-1700D+
Mini-circuits
LFCN-1700D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
CDSCB10M7GA119-R0
Murata Manufacturing
Murata Manufacturing's CDSCB10M7GA119-R0 is a Ceramic BPF filter with 2 terminals, measuring L4.5xB2.0xH1.0 mm. It operates at 10.7 MHz and is ideal for surface mount applications in electronic devices requiring precise frequency filtering capabilities.
LFCN-120
LFCN-120 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 105 MHz. With a center frequency of 195 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating from -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8.5 W efficiently.
LFCN-1800+
CFWLA455KHFA-B0
Murata Manufacturing's CFWLA455KHFA-B0 is a Ceramic BPF filter with 5 terminals, operating from -20 to 80°C. It has a center frequency of 0.455 MHz and max insertion loss of 6 dB. Ideal for applications requiring an I/O impedance of 2000 OHM, this filter is mounted through hole and measures L11.0xB7.0xH7.5 mm.
LFCN-1000+
LFCN-1000+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss at 1300MHz. It operates b/w -55 to 100°C, has VSWR of 1.3, and is ideal for applications requiring a compact surface mount filter with 50Ω impedance.
LFCN-1200D+
LFCN-1200D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 kHz. With a center frequency of 1530 MHz and insertion loss of 3 dB, it's ideal for applications requiring surface mount filters in the 50 Ohm impedance range.
LFL182G54TC1B838
Murata Manufacturing's LFL182G54TC1B838 is a Ceramic LPF filter with 2545 MHz center frequency, 0.43 dB insertion loss, and 50 OHM impedance. Ideal for surface mount applications in electronics, it operates b/w -40 to 85 °C with a max power input of 3 W.
0896BM15A0001E
Johanson Technology
0896BM15A0001E by Johanson Technology is a Ceramic LPF filter with a center frequency of 895.5 MHz and max insertion loss of 1.55 dB. Operating b/w -40°C to 125°C, it's ideal for applications requiring a compact surface mount filter with an impedance of 50Ω and power handling capacity of 1W.
6530BP44A1190E
Johanson Dielectrics
Johanson Dielectrics' 6530BP44A1190E is a Ceramic BPF filter with 3dB max insertion loss, operating from -40 to 85°C. Ideal for surface mount applications at 6525 MHz, it has an average input power of 3W and impedance of 50Ω.
2450LP07C0100T
2450LP07C0100T by Johanson Technology is a Ceramic LPF filter with a center frequency of 2450 MHz and max insertion loss of 0.7 dB. It operates b/w -40 to 85 °C, has an I/O impedance of 50 OHM, and can handle up to 3 W average input power. Ideal for surface mount applications in various electronic devices.
LFCN-6000+
LFCN-6000+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 6800 MHz. With a VSWR of 1.3, it operates b/w -55 to 100 °C and has a compact size of L3.2xB1.6xH0.94 mm, making it ideal for RF applications requiring precise filtering in limited space.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
Golledge Electronics
CERAMIC BPF; Length: 11.5 mm; Dimensions: L11.5XB7.5XH8 (mm); Additional Features: BULK; HIGH SELECTIVITY; Width (mm): 7.5; Maximum Insertion Loss: 6 dB;
HFCN-5500D
The Mini-circuits HFCN-5500D is a Ceramic HPF filter with 6 terminals, offering 20 dB attenuation at 5500 MHz. With a max insertion loss of 3 dB and VSWR of 1.5, it's ideal for RF applications requiring high-frequency filtering in a compact surface-mount design.
BFU455K
Murata Manufacturing's BFU455K is a Ceramic BPF filter with 2 terminals, offering 12 dB attenuation at max frequency of 0.455 MHz. With dimensions of L7xB3.5xH9 mm, it is designed for through hole mounting applications and provides max attenuation at ±9 kHz frequency range.
LFCN-1200
LFCN-1200 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 MHz. With a center frequency of 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
4700BP15A0600E
4700BP15A0600E by Johanson Technology is a Ceramic BPF filter with a center frequency of 4700 MHz, 0.9 dB insertion loss, and 3W power rating. It operates b/w -40°C to 85°C, ideal for surface mount applications in RF circuits requiring a compact design.
B096QC2S
Knowles Precision Devices
B096QC2S by Knowles Precision Devices is a Ceramic BPF filter with 3dB max insertion loss, 10,000 MHz center frequency, and -55 to 125°C operating temperature range. Ideal for surface mount applications in need of a compact (4.57mm x 10.86mm x 2.54mm) ceramic filter with 50Ω impedance.
TSB1N18D2G00LV0H7T
Taiyo Yuden
TSB1N18D2G00LV0H7T by Taiyo Yuden is a Ceramic BPF filter with 1.8 dB max insertion loss, 2002.5 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in temperature range -40 to 85 °C, commonly used in RF communication systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
LFCN-80
The Mini-circuits LFCN-80 is a ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 80 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and an input power rating of 8.5 W.
LFCN-800D+
LFCN-800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 9 W efficiently.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
LFCN-800+
CERAMIC LPF; Average Input Power: 9 W; Maximum Attenuation Frequency (± Δf): 510000 kHz; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 990 MHz; I/O Impedance: 50 OHM;
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
LFCN-80D
LFCN-80D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering 40 dB attenuation at max frequency of 550 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for applications requiring high-frequency filtering in compact spaces like RF communication systems.
LFCN-80D+
LFCN-80D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 1405500 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has low insertion loss of 3 dB and can handle an average input power of 8.5 W.
CERAMIC LPF; Additional Features: TAPE AND REEL; Height: .94 mm; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Maximum Attenuation Frequency (± Δf): 470000 kHz;
LFCN-1200D
CERAMIC LPF; Minimum No. of Sections: 7; I/O Impedance: 50 OHM; Maximum Insertion Loss: 3 dB; Minimum Attenuation Frequency (± Δf): 335000 kHz; Maximum Operating Temperature: 100 Cel;
LFCN-1200+
LFCN-1200+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 1530 MHz and max insertion loss of 1 dB. With an operating temperature range from -55 to 100°C, it's ideal for RF applications requiring low-pass filtering in the 50 Ohm impedance range.
LFCN-1200+T&R
CERAMIC HPF; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Center/Cutoff Frequency (fo/fc): 1180 MHz; Width (mm): 1.6; I/O Impedance: 50 OHM;
LFCN-1700D
CERAMIC LPF; Center/Cutoff Frequency (fo/fc): 2050 MHz; Minimum Attenuation Frequency (± Δf): 325000 kHz; Minimum No. of Sections: 7; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel;
CERAMIC LPF; Maximum Insertion Loss: 3 dB; No. of Terminals: 4; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 2050 MHz; Height: .94 mm;
LFCN-1000D+
CERAMIC LPF; Maximum Operating Temperature: 100 Cel; No. of Terminals: 4; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Mounting Type: SURFACE MOUNT;
LFCN-1000D
CERAMIC LPF; Maximum Insertion Loss: 3 dB; Average Input Power: 10 W; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1300 MHz; Attenuation At Minimum Frequency: 20 dB;
LFCN-1800D-1+
CERAMIC LPF; Height: .94 mm; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Voltage Standing Wave Ratio: 1.2; Average Input Power: 10 W;
LFCN-1800D-6+
LFCN-1800D-6+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss, 2125 MHz center frequency, and 1.2 VSWR. Ideal for RF applications requiring a compact surface-mount filter with an operating temperature range of -55 to 100°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved