Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFCN-1200D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 30 dB at max frequency. With cutoff frequency at 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling up to 10 W.
Median Price
$2.670
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Argo Parts USA
Continental Prestige Electronics
$2.617
AZTECH Wire
$13.260
$12.730
$12.480
$12.230
Netroflash
$2.537
$2.483
Having 4 terminals allows for easy connectivity and installation, making this product user-friendly.
Ceramic LPF filters are known for their high performance, stability, and reliability, making this product a dependable choice.
With a high attenuation level at maximum frequency, this filter effectively removes unwanted signals, ensuring a cleaner output.
Being able to operate at a maximum temperature of 100°C allows for versatility in different environments and applications.
The ability to operate at very low temperatures of -55°C makes this filter suitable for use in extreme cold conditions.
The filter can effectively attenuate signals at a relatively low frequency, making it suitable for a wide range of applications.
The use of tin/lead terminal finish provides good conductivity and reliability, ensuring optimal performance of the filter.
With a low insertion loss, this filter minimizes signal degradation and maintains signal integrity.
The specified center/cutoff frequency makes this filter suitable for applications requiring signal processing within the 1.5 GHz frequency range.
A low VSWR of 1.2 indicates efficient power transfer and minimal signal reflection, leading to better overall performance.
Having a minimum of 7 sections allows for precise and customizable filtering capabilities to meet specific requirements.
Consistency in the number of sections ensures uniform filtering performance across different units.
With an average input power of 10W, this filter can handle moderate power levels without compromising performance.
Surface mounting type enables easy integration onto circuit boards, saving space and simplifying assembly processes.
A standard 50 ohm impedance allows for compatibility with common RF systems and components, ensuring seamless integration.
The compact size of this filter makes it suitable for applications where space is limited, without compromising on performance.
The filter can effectively attenuate signals at a high frequency, providing flexibility for applications requiring higher frequency rejection.
Even at the minimum frequency, this filter provides significant attenuation, ensuring unwanted signals are effectively filtered out.
The low profile height of 1mm allows for easy integration into compact electronic devices or systems.
Ceramic Filters LFCN-1200D attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Panjit International
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LFCN-1200D
Mini-circuits
FI168B24956D-T
Taiyo Yuden
CERAMIC BPF; Manufacturer Series: FI;
CFX455F
Murata Manufacturing
Murata Manufacturing's CFX455F is a Ceramic BPF filter with 70 dB attenuation at max frequency of 0.455 MHz. With dimensions of L10.8xB7xH9.5 (mm), it operates b/w -20 to 80 °C, offering 6 dB insertion loss and I/O impedance of 1500 OHM. Ideal for applications requiring precise filtering in narrowband communication systems.
SFECV10M7FA00-R0
Murata's SFECV10M7FA00-R0 is a Ceramic BPF filter with 3dB insertion loss at 10.7 MHz. With dimensions of L6.9xB2.9xH1.5 mm, it has a terminal finish of Silver (Ag) and an I/O impedance of 330Ω. Ideal for surface mount applications in RF circuits for signal filtering and noise suppression.
HFCG-2200+
CERAMIC HPF;
LFCN-3800
The Mini-circuits LFCN-3800 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.45 GHz. With a compact size of 3.2x1.6x0.94 mm, it's ideal for surface mount applications in RF circuits requiring precise filtering at frequencies up to 4.85 GHz.
ASFC10.7MA19-T
ASFC10.7MA19-T by Abracon is a Ceramic BPF filter with 10.7 MHz center frequency, 3 dB max insertion loss, and -20 to 85°C operating range. Ideal for surface mount applications in electronics requiring precise signal filtering at 470 OHM impedance.
HFCN-880D
The Mini-circuits HFCN-880D is a Ceramic HPF filter with 4 terminals, offering attenuation up to 40 dB at 380 kHz. With a center frequency of 880 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring high-frequency filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50Ω and can handle an average input power of 7W.
1400BP41A0550E
Johanson Technology
1400BP41A0550E by Johanson Technology is a Ceramic BPF filter with 2dB max insertion loss, 1400MHz center frequency, and -40 to 85°C operating range. Ideal for surface mount applications in systems requiring a compact 75Ω impedance filter.
LFCN-1200
LFCN-1200 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 MHz. With a center frequency of 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
LFCN-1800D+
LFCN-1800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, attaining 40 dB attenuation at max frequency of 875 kHz. With a center frequency of 2125 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces.
2450LP14A100T
Johanson Dielectrics
2450LP14A100T by Johanson Dielectrics is a Ceramic LPF filter with 6 terminals, operating at -40 to 85°C. It offers a max insertion loss of 0.5 dB at 2450 MHz and can handle an average input power of 3 W. Ideal for applications requiring a surface mount ceramic filter with an impedance of 50 ohms.
2450FM07A0029T
Johanson Technology's 2450FM07A0029T is a Ceramic LPF filter with 2450 MHz center frequency, 0.8 dB insertion loss, and 2 W power rating. Ideal for surface mount applications in the -40 to 85 °C temperature range, this filter has a compact size of 1mm x 0.5mm x 0.4mm.
2450LP07C0100T
2450LP07C0100T by Johanson Technology is a Ceramic LPF filter with a center frequency of 2450 MHz and max insertion loss of 0.7 dB. It operates b/w -40 to 85 °C, has an I/O impedance of 50 OHM, and can handle up to 3 W average input power. Ideal for surface mount applications in various electronic devices.
CFWM455FY
Murata Manufacturing's CFWM455FY is a Ceramic BPF filter with 50 dB attenuation at 6 kHz and 10 dB insertion loss. Ideal for applications requiring precise filtering at 0.455 MHz, this through-hole mount component offers dimensions of L9.5xB6.5xH6.3 mm and an impedance of 2000 ohms.
LFCN-120
LFCN-120 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 105 MHz. With a center frequency of 195 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating from -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8.5 W efficiently.
SFSRA6M00DF00-B0
Murata Manufacturing's SFSRA6M00DF00-B0 is a Ceramic BPF filter with 20 dB attenuation at 6 MHz. Featuring 6 dB max insertion loss, it has dimensions of L10xB4xH7 mm and I/O impedance of 470 OHM. Ideal for applications requiring precise filtering at high frequencies.
CFM455C
Murata Manufacturing's CFM455C is a Ceramic BPF filter with 60 dB attenuation at max 0.455 MHz frequency, and 6 dB at min 13 kHz. With dimensions of L20xB7.5xH10.5 mm, it's ideal for through-hole mounting in applications requiring precise frequency filtering like communication devices.
B096QC2S
Knowles Precision Devices
B096QC2S by Knowles Precision Devices is a Ceramic BPF filter with 3dB max insertion loss, 10,000 MHz center frequency, and -55 to 125°C operating temperature range. Ideal for surface mount applications in need of a compact (4.57mm x 10.86mm x 2.54mm) ceramic filter with 50Ω impedance.
Golledge Electronics
CERAMIC BPF; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 6.5; Dimensions: L9.5XB6.5XH6.3 (mm)/L0.374XB0.256XH0.248 (inch); Manufacturer Series: CFWM; Attenuation At Minimum Frequency: 6 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
LFCN-80
The Mini-circuits LFCN-80 is a ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 80 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and an input power rating of 8.5 W.
LFCN-800D+
LFCN-800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 9 W efficiently.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
LFCN-800+
CERAMIC LPF; Average Input Power: 9 W; Maximum Attenuation Frequency (± Δf): 510000 kHz; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 990 MHz; I/O Impedance: 50 OHM;
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
LFCN-80D
LFCN-80D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering 40 dB attenuation at max frequency of 550 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for applications requiring high-frequency filtering in compact spaces like RF communication systems.
LFCN-80D+
LFCN-80D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 1405500 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has low insertion loss of 3 dB and can handle an average input power of 8.5 W.
LFCN-1200D+
CERAMIC LPF; Additional Features: TAPE AND REEL; Height: .94 mm; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Maximum Attenuation Frequency (± Δf): 470000 kHz;
LFCN-1200+
LFCN-1200+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 1530 MHz and max insertion loss of 1 dB. With an operating temperature range from -55 to 100°C, it's ideal for RF applications requiring low-pass filtering in the 50 Ohm impedance range.
LFCN-1200+T&R
CERAMIC HPF; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Center/Cutoff Frequency (fo/fc): 1180 MHz; Width (mm): 1.6; I/O Impedance: 50 OHM;
LFCN-1700D
CERAMIC LPF; Center/Cutoff Frequency (fo/fc): 2050 MHz; Minimum Attenuation Frequency (± Δf): 325000 kHz; Minimum No. of Sections: 7; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel;
LFCN-1700D+
CERAMIC LPF; Maximum Insertion Loss: 3 dB; No. of Terminals: 4; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 2050 MHz; Height: .94 mm;
LFCN-1000D+
CERAMIC LPF; Maximum Operating Temperature: 100 Cel; No. of Terminals: 4; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Mounting Type: SURFACE MOUNT;
LFCN-1000D
CERAMIC LPF; Maximum Insertion Loss: 3 dB; Average Input Power: 10 W; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1300 MHz; Attenuation At Minimum Frequency: 20 dB;
LFCN-1800D-1+
CERAMIC LPF; Height: .94 mm; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Voltage Standing Wave Ratio: 1.2; Average Input Power: 10 W;
LFCN-1800D-6+
LFCN-1800D-6+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss, 2125 MHz center frequency, and 1.2 VSWR. Ideal for RF applications requiring a compact surface-mount filter with an operating temperature range of -55 to 100°C.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
LFCN-120D
CERAMIC LPF; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Additional Features: ATTENUATION MIN 20 DB AT 280 MHZ; ATTENUATION MAX 40 DB AT 1850 MHZ; Height: .94 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved