Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
Median Price
$10.620
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.890
100+ parts
$6.060
1k+ parts
$4.820
10k+ parts
-
DigiKey
$14.350
$5.544
$4.651
$3.960
Nova Conductors
$4.280
Vyrian
Chip Stock
Bristol Electronics
IBS Electronics
$6.032
Resion
Prism Electronics
QIE Inc.
Cogito LLC
Classic Components Corporation
EZ Electronic Parts
Right Parts Inc.
Micros
$23.061
Partservice
$22.563
Micros sp.j. W. Kędra i J. Lic
$24.168
Contempo Components LLC
Cyclops Electronics Ltd
Corohmni
$0.908
Advanced Electronics
$3.526
$3.349
Continental Prestige Electronics
$3.881
Argo Parts USA
Netroflash
$4.066
$3.980
Kepictronics
iodParts Technologies Inc.
GreenTree Electronics
Authorized Procurement Solutions
Speed Components Ltd (Excess)
CERAMIC LPF - This filter type ensures efficient signal filtering, making it suitable for various applications.
40 dB - With high attenuation, this product effectively suppresses unwanted frequencies, improving signal quality.
100 °C - The product's ability to operate at high temperatures ensures reliability and durability in demanding environments.
55 °C - The wide temperature range allows this product to be used in various climates and conditions.
55000 kHz - This specification indicates the product's effectiveness in attenuating signals at a specific frequency range, providing precise filtering capabilities.
MATTE TIN OVER NICKEL - The terminal finish enhances conductivity and corrosion resistance, ensuring a long-lasting and reliable connection.
1.6 - The compact width makes this filter suitable for space-constrained applications while maintaining high performance.
3 dB - The low insertion loss ensures minimal signal degradation, allowing for accurate and clear transmission.
145 MHz - This specific frequency range is ideal for applications requiring precise signal filtering and modulation.
1.2 - The low voltage standing wave ratio indicates efficient power transmission and reduced signal reflection, leading to improved performance.
3.2 mm - The compact length makes this filter suitable for miniaturized devices without compromising its filtering capabilities.
7 - The product's design with a minimum of 7 sections enhances its filtering efficiency and accuracy.
7 - With a maximum of 7 sections, this filter provides optimized signal filtering while minimizing complexity.
8.5 W - The high average input power capability enables this product to handle robust signal flows, ensuring reliable performance.
SURFACE MOUNT - The surface mount design simplifies installation and integration, making it convenient for various circuit board designs.
50 OHM - The standardized impedance ensures compatibility with a wide range of input and output devices, facilitating seamless signal transfer.
L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch) - The compact dimensions allow for easy integration into space-limited applications, providing high-performance filtering capabilities.
80000 kHz - This specification indicates the product's ability to effectively attenuate signals at a specific frequency range, enhancing signal clarity and quality.
20 dB - With attenuation at the minimum frequency, this filter effectively reduces unwanted noise and interference, resulting in improved overall performance.
0.94 mm - The low height profile makes this product suitable for slim devices while maintaining efficient signal filtration.
Ceramic Filters LFCN-80+ attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Width (mm):
LFCN-80+ Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification (PDF)
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
1554216004
Molex
WIRE AND CABLE;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LFCN-800+
Mini-circuits
LFCN-800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 990 MHz. With a compact size of L3.2XB1.6XH0.94 (mm), it's ideal for surface mount applications in RF circuits, offering low insertion loss of 3 dB and VSWR of 1.2 for impedance matching.
2450LP14A100T
Johanson Dielectrics
2450LP14A100T by Johanson Dielectrics is a Ceramic LPF filter with 6 terminals, operating at -40 to 85°C. It offers a max insertion loss of 0.5 dB at 2450 MHz and can handle an average input power of 3 W. Ideal for applications requiring a surface mount ceramic filter with an impedance of 50 ohms.
LFCN-1575D
LFCN-1575D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 4925000 kHz. With a center frequency of 1875 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with dimensions of L3.2XB1.6XH0.94 mm.
SFECF10M7EA00-R0
SFECF10M7EA00-R0 by Murata: Ceramic BPF filter with 3dB max insertion loss, 10.7 MHz center frequency, and 6 terminals. Ideal for surface mount applications in electronics for impedance of 330Ω at -20 to 80°C temperature range.
LFCN-2250D
LFCN-2250D by Mini-circuits is a Ceramic LPF filter with 4 terminals, 2575 MHz cutoff frequency, and 20 dB attenuation at max frequency. Ideal for applications requiring a compact surface mount filter with low insertion loss and high power handling up to 10W.
HFCN-2700
The Mini-circuits HFCN-2700 is a Ceramic HPF filter with 4 terminals, attaining 40 dB attenuation at 1 MHz. With a center frequency of 2500 MHz and VSWR of 1.5, it's ideal for RF applications requiring high-frequency filtering in a compact surface-mount design.
SFECF10M7HA00-R0
Murata's SFECF10M7HA00-R0 is a Ceramic BPF filter with 6 terminals, fo/fc of 10.7 MHz, and max insertion loss of 4 dB. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C with an impedance of 330Ω.
2450FM07D0034T
Johanson Technology
2450FM07D0034T by Johanson Technology is a FERRITE CHIP ceramic filter with a center frequency of 2450 MHz. It has a max insertion loss of 1 dB and can handle an average input power of 3 W. Ideal for surface mount applications in the temperature range of -40 to 85°C, this filter is designed for use in systems requiring a compact and efficient filtering solution.
CFUCG455KE4A-R0
Murata Manufacturing's CFUCG455KE4A-R0 is a Ceramic BPF filter with 6 dB max insertion loss, fo/fc at 0.455 MHz, and 1500 OHM I/O impedance. Ideal for applications requiring precise frequency filtering in a compact form factor, such as wireless communication devices.
SFSKA6M50CF00-R3
Murata Manufacturing's SFSKA6M50CF00-R3 is a Ceramic BPF filter with 3 terminals, gold finish. It operates b/w -20°C to 80°C, has 6dB insertion loss at 6.5MHz. Ideal for applications requiring a surface mount ceramic filter with an impedance of 470Ω.
773-0055
Oscilent
CERAMIC BPF; Manufacturer Series: 773;
LFCN-120+
LFCN-120+ by Mini-circuits is a Ceramic LPF filter with 40 dB attenuation at max frequency of 195 MHz. With a VSWR of 1.2, it operates b/w -55 to 100 °C and has a compact size of L3.2XB1.6XH0.94 mm making it ideal for surface mount applications in RF circuits.
CDBM455C7
Murata Manufacturing's CDBM455C7 is a Ceramic BPF filter with 0.455 MHz center frequency, -20 to 80°C operating range, and dimensions of L6xB3xH6 mm. Ideal for through-hole mounting applications in various electronic devices.
LFCN-2250D+
LFCN-2250D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20 dB at min frequency and 30 dB at max frequency. With a center frequency of 2575 MHz, it is ideal for RF applications requiring high attenuation and low insertion loss in a compact surface mount design.
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
HFCN-880D
The Mini-circuits HFCN-880D is a Ceramic HPF filter with 4 terminals, offering attenuation up to 40 dB at 380 kHz. With a center frequency of 880 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring high-frequency filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50Ω and can handle an average input power of 7W.
CFWM455FY
Murata Manufacturing's CFWM455FY is a Ceramic BPF filter with 50 dB attenuation at 6 kHz and 10 dB insertion loss. Ideal for applications requiring precise filtering at 0.455 MHz, this through-hole mount component offers dimensions of L9.5xB6.5xH6.3 mm and an impedance of 2000 ohms.
LFCN-320D+
LFCN-320D+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 180000 kHz. Operating b/w -55 to 100 °C, it has a center frequency of 460 MHz and max insertion loss of 3 dB. Ideal for applications requiring surface mount filters with 50 OHM impedance.
LFCN-320D
LFCN-320D by Mini-circuits is a Ceramic LPF filter with 4 terminals. It offers 40 dB attenuation at max frequency of 2040 kHz and has a center frequency of 460 MHz. Ideal for applications requiring high attenuation and precise filtering in compact spaces.
3750BP14D0900T
Johanson Dielectrics' 3750BP14D0900T is a Ceramic BPF filter with 1.7 dB max insertion loss, 3750 MHz center frequency, and -40 to 105 °C operating temperature range. Ideal for surface mount applications in RF circuits requiring high input power handling at 50 OHM impedance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFCN-80
The Mini-circuits LFCN-80 is a ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 80 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and an input power rating of 8.5 W.
LFCN-800D+
LFCN-800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 9 W efficiently.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
CERAMIC LPF; Average Input Power: 9 W; Maximum Attenuation Frequency (± Δf): 510000 kHz; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 990 MHz; I/O Impedance: 50 OHM;
LFCN-80D
LFCN-80D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering 40 dB attenuation at max frequency of 550 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for applications requiring high-frequency filtering in compact spaces like RF communication systems.
LFCN-80D+
LFCN-80D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 1405500 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has low insertion loss of 3 dB and can handle an average input power of 8.5 W.
LFCN-1200D+
CERAMIC LPF; Additional Features: TAPE AND REEL; Height: .94 mm; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Maximum Attenuation Frequency (± Δf): 470000 kHz;
LFCN-1200D
CERAMIC LPF; Minimum No. of Sections: 7; I/O Impedance: 50 OHM; Maximum Insertion Loss: 3 dB; Minimum Attenuation Frequency (± Δf): 335000 kHz; Maximum Operating Temperature: 100 Cel;
LFCN-1200+
LFCN-1200+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 1530 MHz and max insertion loss of 1 dB. With an operating temperature range from -55 to 100°C, it's ideal for RF applications requiring low-pass filtering in the 50 Ohm impedance range.
LFCN-1200
LFCN-1200 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 MHz. With a center frequency of 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
LFCN-1200+T&R
CERAMIC HPF; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Center/Cutoff Frequency (fo/fc): 1180 MHz; Width (mm): 1.6; I/O Impedance: 50 OHM;
LFCN-1700D
CERAMIC LPF; Center/Cutoff Frequency (fo/fc): 2050 MHz; Minimum Attenuation Frequency (± Δf): 325000 kHz; Minimum No. of Sections: 7; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel;
LFCN-1700D+
CERAMIC LPF; Maximum Insertion Loss: 3 dB; No. of Terminals: 4; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 2050 MHz; Height: .94 mm;
LFCN-1000D+
CERAMIC LPF; Maximum Operating Temperature: 100 Cel; No. of Terminals: 4; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Mounting Type: SURFACE MOUNT;
LFCN-1000D
CERAMIC LPF; Maximum Insertion Loss: 3 dB; Average Input Power: 10 W; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1300 MHz; Attenuation At Minimum Frequency: 20 dB;
LFCN-1800D-1+
CERAMIC LPF; Height: .94 mm; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Voltage Standing Wave Ratio: 1.2; Average Input Power: 10 W;
LFCN-1800D-6+
LFCN-1800D-6+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss, 2125 MHz center frequency, and 1.2 VSWR. Ideal for RF applications requiring a compact surface-mount filter with an operating temperature range of -55 to 100°C.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
LFCN-3000
CERAMIC LPF; Maximum Insertion Loss: 3 dB; Attenuation At Minimum Frequency: 20 dB; Additional Features: TAPE AND REEL; Average Input Power: 10 W; Maximum Operating Temperature: 100 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved