Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFCN-800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 990 MHz. With a compact size of L3.2XB1.6XH0.94 (mm), it's ideal for surface mount applications in RF circuits, offering low insertion loss of 3 dB and VSWR of 1.2 for impedance matching.
Median Price
$12.230
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.652
1k+ parts
$1.867
10k+ parts
$1.525
Mouser Electronics
$2.660
$1.740
-
Freelance Electronics
$1.200
Nova Conductors
$1.704
Chip Stock
Vyrian
Component Sense
Bristol Electronics
Atlantic Semiconductor
Prism Electronics
Cogito LLC
Speed Components Ltd
Argo Parts USA
$1.607
Continental Prestige Electronics
$1.575
Corohmni
$1.673
Netroflash
$1.669
Advanced Electronics
$1.723
$1.637
Aztec Data Supply Inc.
$2.980
Perfect Parts
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
GreenTree Electronics
Kepictronics
Speed Components Ltd (Excess)
Ceramic LPF filters are known for their high performance and reliability in filtering out unwanted frequencies.
High attenuation at the maximum frequency ensures effective noise reduction and signal clarity.
Can withstand high temperatures without compromising performance.
Can operate in extreme cold conditions, making it a versatile choice for various environments.
Effective filtering of frequencies starting from a relatively low threshold, ensuring comprehensive signal cleaning.
Provides a durable and corrosion-resistant finish for long-lasting performance.
Compact size allows for easy integration into electronic devices with limited space.
Low insertion loss helps in preserving signal strength and integrity.
Ideal frequency range for various communication applications and signal processing.
Low VSWR indicates efficient power transmission and minimal signal loss.
Compact design makes it suitable for small-scale electronic devices and systems.
Multiple sections ensure thorough frequency filtering for high-quality output.
Optimal number of sections for efficient signal processing and noise reduction.
Capable of handling moderate power inputs for reliable performance.
Convenient packing method for easy storage and transportation.
Surface mount installation simplifies the integration process in electronic circuitry.
Matches standard impedance requirements for seamless connectivity with other components.
Provides precise dimensions for accurate fitting and compatibility with various devices.
Wide range of attenuation frequencies for versatile signal filtering options.
Consistent attenuation across frequencies ensures reliable signal filtering.
Low profile design for easy integration in compact electronic setups.
Ceramic Filters LFCN-800+ attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Width (mm):
LFCN-800+ Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification_2024_03_08 (PDF)
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Cheng-yi Electronic
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
BFU455K
Murata Manufacturing
Murata Manufacturing's BFU455K is a Ceramic BPF filter with 2 terminals, offering 12 dB attenuation at max frequency of 0.455 MHz. With dimensions of L7xB3.5xH9 mm, it is designed for through hole mounting applications and provides max attenuation at ±9 kHz frequency range.
SFECV10M7JA00-R0
Murata's SFECV10M7JA00-R0 is a Ceramic BPF filter with 5.5 dB max insertion loss at 10.7 MHz. Featuring silver terminal finish, it has dimensions of L6.9xB2.9xH1.5 mm and an I/O impedance of 330Ω, ideal for surface mount applications in RF circuits.
LFCN-800+
Mini-circuits
773-0055
Oscilent
CERAMIC BPF; Manufacturer Series: 773;
LFCN-320D+
LFCN-320D+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 180000 kHz. Operating b/w -55 to 100 °C, it has a center frequency of 460 MHz and max insertion loss of 3 dB. Ideal for applications requiring surface mount filters with 50 OHM impedance.
LFB212G49SG8B830
Murata Manufacturing's LFB212G49SG8B830 is a Ceramic BPF filter with 2.6 dB max insertion loss, 2495 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in electronics requiring precise filtering at temperatures ranging from -40 to 85 °C.
LFCN-2250+
LFCN-2250+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 2575 MHz. It operates b/w -55 to 100 °C and has a VSWR of 1.2, making it ideal for RF applications requiring precise filtering in compact spaces. With dimensions of L3.2XB1.6XH0.94 mm, this surface mount filter offers low insertion loss and high power handling capabilities up to 10 W.
LFCN-6000+
LFCN-6000+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 6800 MHz. With a VSWR of 1.3, it operates b/w -55 to 100 °C and has a compact size of L3.2xB1.6xH0.94 mm, making it ideal for RF applications requiring precise filtering in limited space.
7000BP15A1600E-AEC
Johanson Dielectrics
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Packing Method: TR; Maximum No. of Sections: 1;
2450BM14G0011T-AEC
Johanson Dielectrics' 2450BM14G0011T-AEC is a ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates in temperatures ranging from -40 to 105°C and is suitable for surface mount applications requiring an I/O impedance of 50 ohms.
CDBM455C7
Murata Manufacturing's CDBM455C7 is a Ceramic BPF filter with 0.455 MHz center frequency, -20 to 80°C operating range, and dimensions of L6xB3xH6 mm. Ideal for through-hole mounting applications in various electronic devices.
HFCW-5500+
The Mini-circuits HFCW-5500+ is a Ceramic HPF filter with a center frequency of 16750 MHz, handling up to 2.5 W power. Operating from -55°C to 125°C, it's ideal for RF applications requiring a surface mount ceramic filter with 50 Ohm impedance.
LFCN-1700+
LFCN-1700+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 450 kHz. Operating from -55 to 100°C, it has a center frequency of 2050 MHz and VSWR of 1.2, ideal for surface mount applications in RF circuits.
LFCN-1700D+
LFCN-1700D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
2450FM07A0029T
Johanson Technology
Johanson Technology's 2450FM07A0029T is a Ceramic LPF filter with 2450 MHz center frequency, 0.8 dB insertion loss, and 2 W power rating. Ideal for surface mount applications in the -40 to 85 °C temperature range, this filter has a compact size of 1mm x 0.5mm x 0.4mm.
HFCN-5500D+
HFCN-5500D+ by Mini-circuits is a ceramic filter with a cutoff frequency of 5500 MHz and attenuation of 30 dB at max frequency. It operates in temperatures ranging from -55 to 100 °C and is suitable for surface mount applications requiring high pass filtering.
LFCN-1700
The Mini-circuits LFCN-1700 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter provides low insertion loss of 3 dB and can handle an average input power of 10 W.
HFCN-2700
The Mini-circuits HFCN-2700 is a Ceramic HPF filter with 4 terminals, attaining 40 dB attenuation at 1 MHz. With a center frequency of 2500 MHz and VSWR of 1.5, it's ideal for RF applications requiring high-frequency filtering in a compact surface-mount design.
CFUCG455KF4X-R0
Murata Manufacturing's CFUCG455KF4X-R0 is a Ceramic BPF filter with 6 dB max insertion loss and 0.455 MHz center frequency. Operating b/w -20°C to 80°C, it has a compact size of L6xB4xH7.5 mm for surface mount applications with 1500 Ohm impedance.
LFCN-1000D+
LFCN-1000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
LFCN-80
The Mini-circuits LFCN-80 is a ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 80 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and an input power rating of 8.5 W.
LFCN-800D+
LFCN-800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 9 W efficiently.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
LFCN-80D
LFCN-80D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering 40 dB attenuation at max frequency of 550 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for applications requiring high-frequency filtering in compact spaces like RF communication systems.
LFCN-80D+
LFCN-80D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 1405500 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has low insertion loss of 3 dB and can handle an average input power of 8.5 W.
LFCN-1200D+
CERAMIC LPF; Additional Features: TAPE AND REEL; Height: .94 mm; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Maximum Attenuation Frequency (± Δf): 470000 kHz;
LFCN-1200D
CERAMIC LPF; Minimum No. of Sections: 7; I/O Impedance: 50 OHM; Maximum Insertion Loss: 3 dB; Minimum Attenuation Frequency (± Δf): 335000 kHz; Maximum Operating Temperature: 100 Cel;
LFCN-1200+
LFCN-1200+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 1530 MHz and max insertion loss of 1 dB. With an operating temperature range from -55 to 100°C, it's ideal for RF applications requiring low-pass filtering in the 50 Ohm impedance range.
LFCN-1200
LFCN-1200 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 MHz. With a center frequency of 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
LFCN-1200+T&R
CERAMIC HPF; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Center/Cutoff Frequency (fo/fc): 1180 MHz; Width (mm): 1.6; I/O Impedance: 50 OHM;
LFCN-1700D
CERAMIC LPF; Center/Cutoff Frequency (fo/fc): 2050 MHz; Minimum Attenuation Frequency (± Δf): 325000 kHz; Minimum No. of Sections: 7; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel;
CERAMIC LPF; Maximum Insertion Loss: 3 dB; No. of Terminals: 4; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 2050 MHz; Height: .94 mm;
CERAMIC LPF; Maximum Operating Temperature: 100 Cel; No. of Terminals: 4; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Mounting Type: SURFACE MOUNT;
LFCN-1000D
CERAMIC LPF; Maximum Insertion Loss: 3 dB; Average Input Power: 10 W; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1300 MHz; Attenuation At Minimum Frequency: 20 dB;
LFCN-1800D-1+
CERAMIC LPF; Height: .94 mm; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Voltage Standing Wave Ratio: 1.2; Average Input Power: 10 W;
LFCN-1800D-6+
LFCN-1800D-6+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss, 2125 MHz center frequency, and 1.2 VSWR. Ideal for RF applications requiring a compact surface-mount filter with an operating temperature range of -55 to 100°C.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
LFCN-1400
CERAMIC LPF; Voltage Standing Wave Ratio: 1.2; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); No. of Terminals: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved