Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFCN-1700D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 4450 kHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter has low insertion loss of 3 dB and can handle an average input power of 10 W.
Median Price
$13.150
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$3.432
1k+ parts
$2.693
10k+ parts
-
Nova Conductors
$2.589
Vyrian
Argo Parts USA
Continental Prestige Electronics
$2.537
Netroflash
$2.460
$2.408
AZTECH Wire
$8.701
Having 4 terminals allows for secure and reliable connections, ensuring stability in performance.
Ceramic Low Pass Filter technology provides efficient noise reduction and signal clarity for optimal performance.
High attenuation at maximum frequency ensures effective filtering of unwanted signals or interference.
With a maximum operating temperature of 100°C, this filter can withstand high heat conditions for reliable performance.
The filter can operate in extremely low temperatures down to -55°C, making it suitable for various environments.
The filter provides effective attenuation at a lower frequency range, ensuring comprehensive signal filtering capabilities.
Tin/Lead terminal finish offers good solderability and conductivity for reliable connections.
Low insertion loss helps in maintaining signal integrity and minimizing loss during signal transmission.
The center/cutoff frequency of 2050 MHz indicates the filter's capability to efficiently block or pass signals within this frequency range.
A low VSWR of 1.2 signifies minimal signal reflection and efficient power transfer within the system.
Having a minimum of 7 sections indicates a more complex and precise filtering design for improved signal processing.
The maximum of 7 sections ensures a balanced design that effectively filters out unwanted frequencies while passing the desired signals.
With an average input power of 10 watts, the filter can handle moderate power levels for consistent performance.
Surface mount configuration offers easy installation and space-saving design for convenient integration into electronic systems.
Matching the filter's input/output impedance with the system's impedance ensures optimal signal transfer and minimal loss.
Compact dimensions make it suitable for space-restricted applications without compromising on performance.
High attenuation frequency range ensures effective filtering of a wide range of unwanted signals or noise.
Even at the minimum frequency, the filter provides significant attenuation for comprehensive signal filtering.
Low profile design with a height of 1 mm allows for flexible installation options in compact electronic devices.
Ceramic Filters LFCN-1700D attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM358AN
NXP Semiconductors
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Diotec Semiconductor Ag
Taitron Components
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BSS123,215
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
Rectron
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LFCN-3800D+
Mini-circuits
LFCN-3800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 1150000 kHz. With a cutoff frequency of 4850 MHz and VSWR of 1.3, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8 W efficiently.
CFWM455FY
Murata Manufacturing
Murata Manufacturing's CFWM455FY is a Ceramic BPF filter with 50 dB attenuation at 6 kHz and 10 dB insertion loss. Ideal for applications requiring precise filtering at 0.455 MHz, this through-hole mount component offers dimensions of L9.5xB6.5xH6.3 mm and an impedance of 2000 ohms.
LFCN-1000D+
LFCN-1000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
SFECV10M7FA00-R0
Murata's SFECV10M7FA00-R0 is a Ceramic BPF filter with 3dB insertion loss at 10.7 MHz. With dimensions of L6.9xB2.9xH1.5 mm, it has a terminal finish of Silver (Ag) and an I/O impedance of 330Ω. Ideal for surface mount applications in RF circuits for signal filtering and noise suppression.
DFC3R836P025BHD
Murata Manufacturing's DFC3R836P025BHD is a Ceramic BPF filter with 2.6 dB max insertion loss at 836.5 MHz. Operating b/w -30°C to 85°C, it features gold terminal finish and surface mounting type. Ideal for applications requiring precise frequency filtering in compact spaces.
SFECF10M7GA00-R0
Murata's SFECF10M7GA00-R0 is a Ceramic BPF filter with 6 terminals, operating from -20 to 80°C. Featuring a center frequency of 10.7 MHz and max insertion loss of 3.5 dB, it's ideal for surface mount applications with an impedance of 330Ω.
CDB455C16
Murata Manufacturing's CDB455C16 is a Ceramic BPF filter with 0.455 MHz center frequency, -20 to 80°C operating range, and dimensions of L7xB3.5xH9 mm. Ideal for through-hole mounting applications in various electronic devices requiring precise signal filtering capabilities.
LFCN-1000
LFCN-1000 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
6530BP44A1190E
Johanson Dielectrics
Johanson Dielectrics' 6530BP44A1190E is a Ceramic BPF filter with 3dB max insertion loss, operating from -40 to 85°C. Ideal for surface mount applications at 6525 MHz, it has an average input power of 3W and impedance of 50Ω.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
7000BP15A1600E-AEC
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Packing Method: TR; Maximum No. of Sections: 1;
LFCN-1700
The Mini-circuits LFCN-1700 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter provides low insertion loss of 3 dB and can handle an average input power of 10 W.
2450LP14A100T
2450LP14A100T by Johanson Dielectrics is a Ceramic LPF filter with 6 terminals, operating at -40 to 85°C. It offers a max insertion loss of 0.5 dB at 2450 MHz and can handle an average input power of 3 W. Ideal for applications requiring a surface mount ceramic filter with an impedance of 50 ohms.
TSB1N18D2G00LV0H7T
Taiyo Yuden
TSB1N18D2G00LV0H7T by Taiyo Yuden is a Ceramic BPF filter with 1.8 dB max insertion loss, 2002.5 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in temperature range -40 to 85 °C, commonly used in RF communication systems.
CFWLA455KHFA-B0
Murata Manufacturing's CFWLA455KHFA-B0 is a Ceramic BPF filter with 5 terminals, operating from -20 to 80°C. It has a center frequency of 0.455 MHz and max insertion loss of 6 dB. Ideal for applications requiring an I/O impedance of 2000 OHM, this filter is mounted through hole and measures L11.0xB7.0xH7.5 mm.
LFCN-6000D+
LFCN-6000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20dB at min frequency and 30dB at max frequency. With a center frequency of 6800MHz, it has a VSWR of 1.3 and can handle an average input power of 9W. Ideal for applications requiring precise filtering in RF circuits.
LFCN-1200+
LFCN-1200+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 1530 MHz and max insertion loss of 1 dB. With an operating temperature range from -55 to 100°C, it's ideal for RF applications requiring low-pass filtering in the 50 Ohm impedance range.
ABSGS4C6-CDGM3B8M
Abracon
ABSGS4C6-CDGM3B8M by Abracon is a ceramic filter with DIELECTRIC BPF type. It operates b/w -40 to 90°C, has 2.35 dB insertion loss at 7240 MHz, and VSWR of 2. Ideal for applications requiring a compact surface mount filter with 50 Ohm impedance and handling up to 1W power input.
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
SFSRA6M00DF00-B0
Murata Manufacturing's SFSRA6M00DF00-B0 is a Ceramic BPF filter with 20 dB attenuation at 6 MHz. Featuring 6 dB max insertion loss, it has dimensions of L10xB4xH7 mm and I/O impedance of 470 OHM. Ideal for applications requiring precise filtering at high frequencies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
LFCN-80
The Mini-circuits LFCN-80 is a ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 80 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and an input power rating of 8.5 W.
LFCN-800D+
LFCN-800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 9 W efficiently.
LFCN-800+
CERAMIC LPF; Average Input Power: 9 W; Maximum Attenuation Frequency (± Δf): 510000 kHz; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 990 MHz; I/O Impedance: 50 OHM;
LFCN-80D
LFCN-80D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering 40 dB attenuation at max frequency of 550 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for applications requiring high-frequency filtering in compact spaces like RF communication systems.
LFCN-80D+
LFCN-80D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 1405500 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has low insertion loss of 3 dB and can handle an average input power of 8.5 W.
LFCN-1200D+
CERAMIC LPF; Additional Features: TAPE AND REEL; Height: .94 mm; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Maximum Attenuation Frequency (± Δf): 470000 kHz;
LFCN-1200D
CERAMIC LPF; Minimum No. of Sections: 7; I/O Impedance: 50 OHM; Maximum Insertion Loss: 3 dB; Minimum Attenuation Frequency (± Δf): 335000 kHz; Maximum Operating Temperature: 100 Cel;
LFCN-1200
LFCN-1200 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 MHz. With a center frequency of 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
LFCN-1200+T&R
CERAMIC HPF; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Center/Cutoff Frequency (fo/fc): 1180 MHz; Width (mm): 1.6; I/O Impedance: 50 OHM;
LFCN-1700D+
CERAMIC LPF; Maximum Insertion Loss: 3 dB; No. of Terminals: 4; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 2050 MHz; Height: .94 mm;
CERAMIC LPF; Maximum Operating Temperature: 100 Cel; No. of Terminals: 4; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Mounting Type: SURFACE MOUNT;
LFCN-1000D
CERAMIC LPF; Maximum Insertion Loss: 3 dB; Average Input Power: 10 W; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1300 MHz; Attenuation At Minimum Frequency: 20 dB;
LFCN-1800D-1+
CERAMIC LPF; Height: .94 mm; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Voltage Standing Wave Ratio: 1.2; Average Input Power: 10 W;
LFCN-1800D-6+
LFCN-1800D-6+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss, 2125 MHz center frequency, and 1.2 VSWR. Ideal for RF applications requiring a compact surface-mount filter with an operating temperature range of -55 to 100°C.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
LFCN-190D+
CERAMIC LPF; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Voltage Standing Wave Ratio: 1.2; Height: .94 mm; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved