Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LFCN-2250+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 2575 MHz. It operates b/w -55 to 100 °C and has a VSWR of 1.2, making it ideal for RF applications requiring precise filtering in compact spaces. With dimensions of L3.2XB1.6XH0.94 mm, this surface mount filter offers low insertion loss and high power handling capabilities up to 10 W.
Median Price
$12.535
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
DigiKey
1+ parts
$12.230
100+ parts
$2.652
1k+ parts
$1.867
10k+ parts
$1.525
Mouser Electronics
$12.840
$2.360
$1.680
-
Nova Conductors
$1.704
DF Sales Co.
$2.000
Chip Stock
Vyrian
Elcom Components
Bristol Electronics
Component Sense
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
Sensible Micro Corp
EPE Components Inc.
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
PC Components Company LLC
Cyclops Electronics Ltd
Technoshack Inc.
Continental Prestige Electronics
$1.582
$1.551
Argo Parts USA
Netroflash
Corohmni
$1.986
Aztec Data Supply Inc.
$3.050
Kepictronics
Authorized Procurement Solutions
Metaverse IC Inc.
Infinite Electronics LLP (Excess)
iodParts Technologies Inc.
GreenTree Electronics
S.R.D Solutions
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
Formix International (Excess)
Ceramic filters are known for their durability and reliability, making this product a good choice for long-term use.
High attenuation at maximum frequency ensures that unwanted signals or noise are effectively filtered out, improving overall signal quality.
With a high maximum operating temperature, this filter can withstand extreme conditions, making it suitable for a wide range of applications.
The low minimum operating temperature allows this filter to function efficiently even in cold environments, enhancing its versatility.
The terminal finish provides good conductivity and corrosion resistance, ensuring stable performance over time.
The compact width makes this filter suitable for applications where space is limited, allowing for easy integration into existing systems.
Low insertion loss results in minimal signal degradation, ensuring that the desired signal passes through without significant loss.
The specific center/cutoff frequency allows this filter to target signals within that frequency range, making it ideal for specific filtering requirements.
A low VSWR indicates efficient power transfer and minimal signal reflection, resulting in improved overall system performance.
The compact length of the filter contributes to its space-saving design, making it suitable for applications where size constraints are a concern.
The surface mount design allows for easy and secure installation on PCBs, streamlining the manufacturing process and ensuring stable connections.
Matching the impedance of the filter to the system results in maximum power transfer, reducing signal loss and improving overall system efficiency.
The precise dimensions provide compatibility with standard PCB layouts, facilitating easy integration into various electronic devices.
The high maximum attenuation frequency ensures that a wide range of unwanted signals can be effectively filtered out, enhancing signal purity.
Even at minimum frequency, this filter provides significant attenuation, ensuring effective signal filtering across a wide frequency range.
The low profile height makes this filter suitable for applications where space constraints are a concern, allowing for flexible installation options.
Ceramic Filters LFCN-2250+ attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Additional Features:
Maximum Attenuation Frequency (± Δf):
Minimum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Width (mm):
LFCN-2250+ Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification_2024_03_08 (PDF)
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Rugao Dachang Electronic
BSS138PS,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
EU2B-YS303C
Idec
ROTARY SWITCH;
0896BM15A0001E
Johanson Technology
0896BM15A0001E by Johanson Technology is a Ceramic LPF filter with a center frequency of 895.5 MHz and max insertion loss of 1.55 dB. Operating b/w -40°C to 125°C, it's ideal for applications requiring a compact surface mount filter with an impedance of 50Ω and power handling capacity of 1W.
CDB455C16
Telcona Ag
CERAMIC BPF; Minimum Operating Temperature: -20 Cel; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 80 Cel; Center/Cutoff Frequency (fo/fc): .455 MHz; Dimensions: L7XB3.5XH9 (mm);
FI168B24956D-T
Taiyo Yuden
CERAMIC BPF; Manufacturer Series: FI;
BFHK-1572+
Mini-circuits
Mini-circuits BFHK-1572+ is a Ceramic BPF with 15.6 MHz fo/fc, 4 dB max insertion loss, and 1 W avg input power. Ideal for RF applications, it operates b/w -55 to 125 °C, has a compact size of 3.2mm x 4.5mm x 1.49mm, and features surface mounting type.
ABSGS4C6-CDGM3B8M
Abracon
ABSGS4C6-CDGM3B8M by Abracon is a ceramic filter with DIELECTRIC BPF type. It operates b/w -40 to 90°C, has 2.35 dB insertion loss at 7240 MHz, and VSWR of 2. Ideal for applications requiring a compact surface mount filter with 50 Ohm impedance and handling up to 1W power input.
SFSRA6M00DF00-B0
Murata Manufacturing
Murata Manufacturing's SFSRA6M00DF00-B0 is a Ceramic BPF filter with 20 dB attenuation at 6 MHz. Featuring 6 dB max insertion loss, it has dimensions of L10xB4xH7 mm and I/O impedance of 470 OHM. Ideal for applications requiring precise filtering at high frequencies.
LFCN-1200D
LFCN-1200D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 30 dB at max frequency. With cutoff frequency at 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling up to 10 W.
CFUCG455KF4X-R0
Murata Manufacturing's CFUCG455KF4X-R0 is a Ceramic BPF filter with 6 dB max insertion loss and 0.455 MHz center frequency. Operating b/w -20°C to 80°C, it has a compact size of L6xB4xH7.5 mm for surface mount applications with 1500 Ohm impedance.
LFCN-2250D+
LFCN-2250D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20 dB at min frequency and 30 dB at max frequency. With a center frequency of 2575 MHz, it is ideal for RF applications requiring high attenuation and low insertion loss in a compact surface mount design.
2450LP14B100T
2450LP14B100T by Johanson Technology is a Ceramic LPF filter with 6 terminals, operating from -40 to 85°C. It offers a max insertion loss of 0.5 dB at 2450 MHz and can handle up to 3W input power. Ideal for surface mount applications in need of a compact filter with an impedance of 50Ω.
7000BP15A1600E-AEC
Johanson Dielectrics
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Packing Method: TR; Maximum No. of Sections: 1;
LFCN-1000D
LFCN-1000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring high attenuation and low insertion loss in a compact surface-mount design.
LFCN-6000D
LFCN-6000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.7 GHz. With a center frequency of 6.8 GHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50 ohms and dimensions of L3.2xB1.6xH0.94 mm.
CER0357C
Cts
Cts CER0357C is a Ceramic BPF filter with 2 terminals, offering 22 dB attenuation at 1575 MHz. With a max insertion loss of 1.7 dB and operating temperature range from -40 to 85 °C, it's ideal for surface mount applications requiring high-frequency filtering.
2450BM14G0011T
2450BM14G0011T by Johanson Technology is a Ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates b/w -40°C to 85°C, has dimensions of 1.6x0.8x0.6 mm, and is ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
LFCN-1200+T&R
LFCN-1200+T&R by Mini-circuits is a Ceramic HPF filter with 1180 MHz center frequency, 2 dB insertion loss, and 1.5 VSWR. Ideal for RF applications requiring high-pass filtering in the 50 OHM impedance range. Operating temperatures from -55 to 100 °C make it versatile for various environments.
LFCN-120
LFCN-120 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 105 MHz. With a center frequency of 195 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating from -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8.5 W efficiently.
CFX455F
Murata Manufacturing's CFX455F is a Ceramic BPF filter with 70 dB attenuation at max frequency of 0.455 MHz. With dimensions of L10.8xB7xH9.5 (mm), it operates b/w -20 to 80 °C, offering 6 dB insertion loss and I/O impedance of 1500 OHM. Ideal for applications requiring precise filtering in narrowband communication systems.
2450LP14A100T
2450LP14A100T by Johanson Dielectrics is a Ceramic LPF filter with 6 terminals, operating at -40 to 85°C. It offers a max insertion loss of 0.5 dB at 2450 MHz and can handle an average input power of 3 W. Ideal for applications requiring a surface mount ceramic filter with an impedance of 50 ohms.
LFCN-2250D
LFCN-2250D by Mini-circuits is a Ceramic LPF filter with 4 terminals, 2575 MHz cutoff frequency, and 20 dB attenuation at max frequency. Ideal for applications requiring a compact surface mount filter with low insertion loss and high power handling up to 10W.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
LFCN-80
The Mini-circuits LFCN-80 is a ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 80 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and an input power rating of 8.5 W.
LFCN-800D+
LFCN-800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 9 W efficiently.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
LFCN-800+
CERAMIC LPF; Average Input Power: 9 W; Maximum Attenuation Frequency (± Δf): 510000 kHz; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 990 MHz; I/O Impedance: 50 OHM;
LFCN-800
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
LFCN-80D
LFCN-80D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering 40 dB attenuation at max frequency of 550 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for applications requiring high-frequency filtering in compact spaces like RF communication systems.
LFCN-80D+
LFCN-80D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 1405500 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has low insertion loss of 3 dB and can handle an average input power of 8.5 W.
LFCN-1200D+
CERAMIC LPF; Additional Features: TAPE AND REEL; Height: .94 mm; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Maximum Attenuation Frequency (± Δf): 470000 kHz;
CERAMIC LPF; Minimum No. of Sections: 7; I/O Impedance: 50 OHM; Maximum Insertion Loss: 3 dB; Minimum Attenuation Frequency (± Δf): 335000 kHz; Maximum Operating Temperature: 100 Cel;
LFCN-1200+
LFCN-1200+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 1530 MHz and max insertion loss of 1 dB. With an operating temperature range from -55 to 100°C, it's ideal for RF applications requiring low-pass filtering in the 50 Ohm impedance range.
LFCN-1200
LFCN-1200 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 MHz. With a center frequency of 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
CERAMIC HPF; Minimum No. of Sections: 7; Maximum No. of Sections: 7; Center/Cutoff Frequency (fo/fc): 1180 MHz; Width (mm): 1.6; I/O Impedance: 50 OHM;
LFCN-1700D
CERAMIC LPF; Center/Cutoff Frequency (fo/fc): 2050 MHz; Minimum Attenuation Frequency (± Δf): 325000 kHz; Minimum No. of Sections: 7; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel;
LFCN-1700D+
CERAMIC LPF; Maximum Insertion Loss: 3 dB; No. of Terminals: 4; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Center/Cutoff Frequency (fo/fc): 2050 MHz; Height: .94 mm;
LFCN-1000D+
CERAMIC LPF; Maximum Operating Temperature: 100 Cel; No. of Terminals: 4; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Mounting Type: SURFACE MOUNT;
CERAMIC LPF; Maximum Insertion Loss: 3 dB; Average Input Power: 10 W; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1300 MHz; Attenuation At Minimum Frequency: 20 dB;
LFCN-1800D-1+
CERAMIC LPF; Height: .94 mm; Attenuation At Minimum Frequency: 20 dB; Minimum No. of Sections: 7; Voltage Standing Wave Ratio: 1.2; Average Input Power: 10 W;
LFCN-1800D-6+
LFCN-1800D-6+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss, 2125 MHz center frequency, and 1.2 VSWR. Ideal for RF applications requiring a compact surface-mount filter with an operating temperature range of -55 to 100°C.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved