Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's SFECF10M7FA00-R0 is a Ceramic BPF filter with 6 terminals, operating from -20 to 80°C. It offers a center frequency of 10.7 MHz and max insertion loss of 3 dB. Ideal for surface mount applications with an impedance of 330Ω, it measures L3.45xB3.1xH1.3 mm and is suitable for various electronic devices requiring precise signal filtering.
Median Price
$0.628
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.784
100+ parts
$0.350
1k+ parts
$0.265
10k+ parts
-
Avnet
Verical
$0.472
$0.357
Nova Conductors
$0.591
Chip Stock
Vyrian
Pegasus Components GmbH
Sea View Technologies
Bristol Electronics
Dan-Mar Components
ComSIT Distribution GmbH
ComSIT USA
ACDS - Activité Composants Distribution Service
LIBRA Elektronik GmbH
Cyclops Electronics Ltd
Argo Parts USA
$0.574
Netroflash
$0.562
$0.550
Continental Prestige Electronics
$0.580
AZTECH Wire
$1.180
$1.130
$1.110
$1.090
Corohmni
$2.652
Robosynatics
Lucentia Tech
$2.145
$2.101
Metaverse IC Inc.
Kepictronics
Cyclops Electronics Ltd (Excess)
Having 6 terminals allows for more versatile connectivity options, making it easier to integrate into various systems.
Ceramic BPF filters are known for their high performance and reliability, ensuring optimal filtering capabilities.
With a maximum operating temperature of 80°C, this filter can withstand high temperature environments without loss of performance.
The filter can also operate in colder environments down to -20°C, providing flexibility for various operating conditions.
The compact width of 3.1mm makes this filter suitable for applications where space is limited.
With a low maximum insertion loss of 3 dB, this filter helps maintain signal strength and quality during filtering.
The center/cutoff frequency of 10.7 MHz indicates that this filter is designed for specific frequency filtering applications with high precision.
The small length of 3.45mm contributes to the filter's compact size, making it ideal for space-constrained installations.
The surface mounting type allows for easy and secure installation on circuit boards, enhancing convenience and reliability.
The 330 OHM impedance ensures compatibility with a wide range of systems and devices, making this filter versatile in its applications.
The compact dimensions of 3.45x3.1x1.3mm (0.136x0.122x0.051 inch) make this filter suitable for miniature and portable devices.
The low height of 1.3mm further adds to the filter's compactness, enabling its use in applications with limited vertical space.
Ceramic Filters SFECF10M7FA00-R0 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Width (mm):
PCN Obsolescence/ EOL - SFECF Series 01/Mar/2022
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LFCN-1700D+
Mini-circuits
LFCN-1700D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
LFCN-120
LFCN-120 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 105 MHz. With a center frequency of 195 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating from -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8.5 W efficiently.
SFSKA5M50CF00-R3
Murata Manufacturing
Murata Manufacturing's SFSKA5M50CF00-R3 is a Ceramic BPF filter with 5.5 MHz center frequency, 6 dB insertion loss, and -20 to 80°C operating temperature range. Ideal for surface mount applications in electronics requiring a compact ceramic filter solution.
2450FM07A0029T
Johanson Technology
Johanson Technology's 2450FM07A0029T is a Ceramic LPF filter with 2450 MHz center frequency, 0.8 dB insertion loss, and 2 W power rating. Ideal for surface mount applications in the -40 to 85 °C temperature range, this filter has a compact size of 1mm x 0.5mm x 0.4mm.
HFCN-5500D
The Mini-circuits HFCN-5500D is a Ceramic HPF filter with 6 terminals, offering 20 dB attenuation at 5500 MHz. With a max insertion loss of 3 dB and VSWR of 1.5, it's ideal for RF applications requiring high-frequency filtering in a compact surface-mount design.
LFCN-1200D
LFCN-1200D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 30 dB at max frequency. With cutoff frequency at 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling up to 10 W.
SFECV10M7JA00-R0
Murata's SFECV10M7JA00-R0 is a Ceramic BPF filter with 5.5 dB max insertion loss at 10.7 MHz. Featuring silver terminal finish, it has dimensions of L6.9xB2.9xH1.5 mm and an I/O impedance of 330Ω, ideal for surface mount applications in RF circuits.
LFB182G45CGFD436
Murata Manufacturing's LFB182G45CGFD436 is a Ceramic BPF filter with 2.8 dB max insertion loss, 2450 MHz center frequency, and 1.7 VSWR. Ideal for applications requiring a compact design and high performance in the 50 OHM impedance range.
LFCN-1000
LFCN-1000 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
LFCN-2250D
LFCN-2250D by Mini-circuits is a Ceramic LPF filter with 4 terminals, 2575 MHz cutoff frequency, and 20 dB attenuation at max frequency. Ideal for applications requiring a compact surface mount filter with low insertion loss and high power handling up to 10W.
HFCG-2200+
CERAMIC HPF;
LFCN-1800D-6+
LFCN-1800D-6+ by Mini-circuits is a Ceramic LPF filter with 1dB max insertion loss, 2125 MHz center frequency, and 1.2 VSWR. Ideal for RF applications requiring a compact surface-mount filter with an operating temperature range of -55 to 100°C.
HFCN-2700AD+
Mini-circuits' HFCN-2700AD+ is a Ceramic HPF filter with 20 dB attenuation at 2700 MHz. With 6 terminals and MIL-STD-202 screening, it has a VSWR of 1.5 and can handle up to 7W input power. Ideal for surface mount applications in RF systems requiring high-frequency filtering.
7000BP15A1600E-AEC
Johanson Dielectrics
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Packing Method: TR; Maximum No. of Sections: 1;
LFCN-3800
The Mini-circuits LFCN-3800 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.45 GHz. With a compact size of 3.2x1.6x0.94 mm, it's ideal for surface mount applications in RF circuits requiring precise filtering at frequencies up to 4.85 GHz.
LFCN-3800D+
LFCN-3800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 1150000 kHz. With a cutoff frequency of 4850 MHz and VSWR of 1.3, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8 W efficiently.
LFCN-2250D+
LFCN-2250D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20 dB at min frequency and 30 dB at max frequency. With a center frequency of 2575 MHz, it is ideal for RF applications requiring high attenuation and low insertion loss in a compact surface mount design.
HFCN-5500D+
HFCN-5500D+ by Mini-circuits is a ceramic filter with a cutoff frequency of 5500 MHz and attenuation of 30 dB at max frequency. It operates in temperatures ranging from -55 to 100 °C and is suitable for surface mount applications requiring high pass filtering.
LFCN-1800
LFCN-1800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 375 MHz. With a center frequency of 2125 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SFECF10M7EA00-R0
CERAMIC BPF; Length: 3.45 mm; Center/Cutoff Frequency (fo/fc): 10.7 MHz; I/O Impedance: 330 OHM; Minimum Operating Temperature: -20 Cel; Width (mm): 3.1;
SFECF10M7GA00-R0
CERAMIC BPF; Length: 3.45 mm; Width (mm): 3.1; Maximum Operating Temperature: 80 Cel; I/O Impedance: 330 OHM; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch);
SFECS13M0SF0023-R0
CERAMIC BPF; Attenuation At Maximum Frequency: 5 dB; Maximum Insertion Loss: 6 dB; Mounting Type: SURFACE MOUNT; Additional Features: 2 ELEMENTS; CHIP TYPE; TAPE AND REEL; Maximum Attenuation Frequency (± Δf): 250 kHz;
SFECV10M7KA00-R0
CERAMIC BPF; Maximum Operating Temperature: 80 Cel; I/O Impedance: 330 OHM; Maximum Insertion Loss: 6 dB; Width (mm): 2.9; Terminal Finish: Silver (Ag);
SFECF10M7HA00-R0
CERAMIC BPF; Width (mm): 3.1; Minimum Operating Temperature: -20 Cel; Height: 1.3 mm; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Maximum Insertion Loss: 4 dB;
SFECV10M7FA00-R0
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Width (mm): 2.9; Length: 6.9 mm; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 3 dB;
CERAMIC BPF; Length: 6.9 mm; Terminal Finish: Silver (Ag); Additional Features: 2 ELEMENTS THICKNESS LONGITUDINAL VIBRATION; CHIP TYPE; TAPE AND REEL; Width (mm): 2.9; JESD-609 Code: e4;
SFECF10M7CQ00S0-R0
CERAMIC BPF; I/O Impedance: 470 OHM; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Additional Features: HIGH-RELIABILITY; No. of Terminals: 6; Maximum Operating Temperature: 80 Cel;
SFECF10M7DA0001-R0
CERAMIC BPF; I/O Impedance: 330 OHM; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 80 Cel; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Minimum Operating Temperature: -20 Cel;
SFECF10M7DF00S0-R0
CERAMIC BPF; Height: 1.3 mm; Minimum Operating Temperature: -20 Cel; Mounting Type: SURFACE MOUNT; Length: 3.45 mm; I/O Impedance: 330 OHM;
SFECF10M7EA00S0-R0
CERAMIC BPF; Mounting Type: SURFACE MOUNT; Length: 3.45 mm; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Additional Features: HIGH-RELIABILITY; Minimum Operating Temperature: -20 Cel;
SFECF10M7FA00S0-R0
CERAMIC BPF; Width (mm): 3.1; Additional Features: HIGH-RELIABILITY; Maximum Insertion Loss: 3 dB; Height: 1.3 mm; No. of Terminals: 6;
SFECF10M7FF00-R0
CERAMIC BPF; Width (mm): 3.1; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 7 dB; Minimum Operating Temperature: -20 Cel; Length: 3.45 mm;
SFECF10M7FF00S0-R0
CERAMIC BPF; Maximum Insertion Loss: 7 dB; Mounting Type: SURFACE MOUNT; Width (mm): 3.1; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 80 Cel;
SFECF10M7GF00-R0
CERAMIC BPF; Maximum Insertion Loss: 8 dB; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Width (mm): 3.1; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Length: 3.45 mm;
SFECF10M7GF00S0-R0
CERAMIC BPF; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Additional Features: HIGH-RELIABILITY; Width (mm): 3.1; Mounting Type: SURFACE MOUNT; Height: 1.3 mm;
SFECF10M7HA00S0-R0
CERAMIC BPF; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -20 Cel; I/O Impedance: 330 OHM; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Height: 1.3 mm;
SFECF10M7HF00-R0
CERAMIC BPF; I/O Impedance: 330 OHM; Length: 3.45 mm; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Height: 1.3 mm; Width (mm): 3.1;
SFECF10M7HF00S0-R0
CERAMIC BPF; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Length: 3.45 mm; Width (mm): 3.1; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Maximum Insertion Loss: 8 dB;
SFECF10M7DF00-R0
CERAMIC BPF; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); No. of Terminals: 6; Maximum Insertion Loss: 6 dB; Maximum Operating Temperature: 80 Cel; Height: 1.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved