Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's SFECV10M7FA00-R0 is a Ceramic BPF filter with 3dB insertion loss at 10.7 MHz. With dimensions of L6.9xB2.9xH1.5 mm, it has a terminal finish of Silver (Ag) and an I/O impedance of 330Ω. Ideal for surface mount applications in RF circuits for signal filtering and noise suppression.
Median Price
$0.380
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
TTI Europe
1+ parts
-
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
Rutronik
$0.320
Connector Distribution Corp
Semi Source
PC Components Company LLC
Nova Conductors
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Prism Electronics
Corohmni
$2.959
Perfect Parts
Cyclops Electronics Ltd (Excess)
Netroflash
Ceramic filters are known for their high-performance filtering capabilities, making this product ideal for applications requiring precise signal filtering.
Silver terminal finish provides excellent conductivity and corrosion resistance, ensuring reliable signal transmission and longevity of the filter.
Narrow width allows for compact design and integration into space-constrained electronic devices without compromising on filtering performance.
Low insertion loss indicates minimal signal attenuation, maintaining the integrity of the filtered signal without significant loss in power.
Specific center/cutoff frequency ensures targeted filtering of signals at 10.7 MHz, making it suitable for applications requiring precise frequency control.
Short length facilitates easier placement and installation of the filter on PCBs or within electronic devices, contributing to ease of assembly and space efficiency.
Surface mount design simplifies the integration of the filter onto PCBs, reducing assembly time and making it suitable for automated manufacturing processes.
Optimal input/output impedance of 330 ohms ensures compatibility with signal sources and destinations, improving signal transmission efficiency and overall system performance.
Compact dimensions provide flexibility in placement and integration, while maintaining the performance requirements of the filter in a variety of electronic applications.
Low profile height enables the filter to be used in slim and compact electronic devices, saving space and allowing for more versatile design options.
Ceramic Filters SFECV10M7FA00-R0 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Additional Features:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
Dimensions:
Terminal Finish:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
EU2B-YS2J03C
Idec
ROTARY SWITCH;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Taiwan Semiconductor
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Yangzhou Yangjie Electronics
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Lite-on Semiconductor
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LFCN-2250D
Mini-circuits
LFCN-2250D by Mini-circuits is a Ceramic LPF filter with 4 terminals, 2575 MHz cutoff frequency, and 20 dB attenuation at max frequency. Ideal for applications requiring a compact surface mount filter with low insertion loss and high power handling up to 10W.
LFCN-1800
LFCN-1800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 375 MHz. With a center frequency of 2125 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
SFE10.7MS3-A
Murata Manufacturing
Murata's SFE10.7MS3-A is a Ceramic BPF filter with 20 dB attenuation at 10.7 MHz, 7 dB insertion loss, and 260 kHz max attenuation frequency. Measuring L7xB3xH7 mm, it has an I/O impedance of 330 OHM and is ideal for through hole mounting applications in electronic devices.
SFSKA5M50CF00-R3
Murata Manufacturing's SFSKA5M50CF00-R3 is a Ceramic BPF filter with 5.5 MHz center frequency, 6 dB insertion loss, and -20 to 80°C operating temperature range. Ideal for surface mount applications in electronics requiring a compact ceramic filter solution.
ADFC15-2450.00-A-T
Abracon
Abracon's ADFC15-2450.00-A-T is a Ceramic BPF filter with 1.7 dB max insertion loss, 2450 MHz center frequency, and 85°C max operating temp. Ideal for surface mount applications in electronics requiring a compact 50 OHM impedance filter solution.
2450LP07C0100T
Johanson Technology
2450LP07C0100T by Johanson Technology is a Ceramic LPF filter with a center frequency of 2450 MHz and max insertion loss of 0.7 dB. It operates b/w -40 to 85 °C, has an I/O impedance of 50 OHM, and can handle up to 3 W average input power. Ideal for surface mount applications in various electronic devices.
HFCW-5500+
The Mini-circuits HFCW-5500+ is a Ceramic HPF filter with a center frequency of 16750 MHz, handling up to 2.5 W power. Operating from -55°C to 125°C, it's ideal for RF applications requiring a surface mount ceramic filter with 50 Ohm impedance.
BFU455K
Murata Manufacturing's BFU455K is a Ceramic BPF filter with 2 terminals, offering 12 dB attenuation at max frequency of 0.455 MHz. With dimensions of L7xB3.5xH9 mm, it is designed for through hole mounting applications and provides max attenuation at ±9 kHz frequency range.
CFM455C
Murata Manufacturing's CFM455C is a Ceramic BPF filter with 60 dB attenuation at max 0.455 MHz frequency, and 6 dB at min 13 kHz. With dimensions of L20xB7.5xH10.5 mm, it's ideal for through-hole mounting in applications requiring precise frequency filtering like communication devices.
SFECS13M0SF0023-R0
Murata Manufacturing's SFECS13M0SF0023-R0 is a Ceramic BPF filter with 5 dB attenuation at 13 MHz. It has a max insertion loss of 6 dB and operates at an I/O impedance of 330Ω. Ideal for surface mount applications, it provides 250 kHz attenuation frequency for effective signal filtering.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
LFCN-1700
The Mini-circuits LFCN-1700 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter provides low insertion loss of 3 dB and can handle an average input power of 10 W.
CDSCB10M7GA119-R0
Murata Manufacturing's CDSCB10M7GA119-R0 is a Ceramic BPF filter with 2 terminals, measuring L4.5xB2.0xH1.0 mm. It operates at 10.7 MHz and is ideal for surface mount applications in electronic devices requiring precise frequency filtering capabilities.
2450FM07D0034T
2450FM07D0034T by Johanson Technology is a FERRITE CHIP ceramic filter with a center frequency of 2450 MHz. It has a max insertion loss of 1 dB and can handle an average input power of 3 W. Ideal for surface mount applications in the temperature range of -40 to 85°C, this filter is designed for use in systems requiring a compact and efficient filtering solution.
BFCN-1860+
BFCN-1860+ by Mini-circuits is a ceramic bandpass filter with a center frequency of 1860 MHz and max insertion loss of 3.5 dB. It has a temperature range from -55 to 100 °C and is suitable for surface mount applications in the 50 OHM impedance range, with SMA FEMALE output connector.
CDBM455C7
Murata Manufacturing's CDBM455C7 is a Ceramic BPF filter with 0.455 MHz center frequency, -20 to 80°C operating range, and dimensions of L6xB3xH6 mm. Ideal for through-hole mounting applications in various electronic devices.
LFCN-1800D
LFCN-1800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2125 MHz and an attenuation of 30 dB at max frequency. This surface mount filter is suitable for applications requiring a cutoff frequency of 300000 kHz and an I/O impedance of 50 Ω.
LFB212G49SG8B830
Murata Manufacturing's LFB212G49SG8B830 is a Ceramic BPF filter with 2.6 dB max insertion loss, 2495 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in electronics requiring precise filtering at temperatures ranging from -40 to 85 °C.
LFCW-8400+
CERAMIC LPF; Center/Cutoff Frequency (fo/fc): 4200 MHz; Maximum No. of Sections: 1; Minimum No. of Sections: 1; I/O Impedance: 50 OHM; Mounting Type: SURFACE MOUNT;
LFCN-3800D
LFCN-3800D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.45 GHz. With a center frequency of 4.85 GHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SFECF10M7EA00-R0
CERAMIC BPF; Length: 3.45 mm; Center/Cutoff Frequency (fo/fc): 10.7 MHz; I/O Impedance: 330 OHM; Minimum Operating Temperature: -20 Cel; Width (mm): 3.1;
SFECF10M7GA00-R0
CERAMIC BPF; Length: 3.45 mm; Width (mm): 3.1; Maximum Operating Temperature: 80 Cel; I/O Impedance: 330 OHM; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch);
CERAMIC BPF; Attenuation At Maximum Frequency: 5 dB; Maximum Insertion Loss: 6 dB; Mounting Type: SURFACE MOUNT; Additional Features: 2 ELEMENTS; CHIP TYPE; TAPE AND REEL; Maximum Attenuation Frequency (± Δf): 250 kHz;
SFECV10M7KA00-R0
CERAMIC BPF; Maximum Operating Temperature: 80 Cel; I/O Impedance: 330 OHM; Maximum Insertion Loss: 6 dB; Width (mm): 2.9; Terminal Finish: Silver (Ag);
SFECF10M7FA00-R0
CERAMIC BPF; No. of Terminals: 6; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Height: 1.3 mm; Maximum Operating Temperature: 80 Cel;
SFECF10M7HA00-R0
CERAMIC BPF; Width (mm): 3.1; Minimum Operating Temperature: -20 Cel; Height: 1.3 mm; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Maximum Insertion Loss: 4 dB;
SFECV10M7JA00-R0
CERAMIC BPF; Length: 6.9 mm; Terminal Finish: Silver (Ag); Additional Features: 2 ELEMENTS THICKNESS LONGITUDINAL VIBRATION; CHIP TYPE; TAPE AND REEL; Width (mm): 2.9; JESD-609 Code: e4;
SFECV10.7MA2-A-TC
CERAMIC BPF; Height: 1.2 mm; JESD-609 Code: e4; Packing Method: TR, 7 INCH; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT;
SFECV10.7MA5S-A-TC
CERAMIC BPF; Terminal Finish: Silver (Ag); I/O Impedance: 330 OHM; Dimensions: L6.9XB2.9XH1.2 (mm); Length: 6.9 mm; Center/Cutoff Frequency (fo/fc): 10.7 MHz;
SFECV10.7MS3S-A-TC
CERAMIC BPF; JESD-609 Code: e4; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Width (mm): 2.9; Maximum Insertion Loss: 4 dB; I/O Impedance: 330 OHM;
SFECV10.7MJS-A-TC
CERAMIC BPF; Length: 6.9 mm; Dimensions: L6.9XB2.9XH1.2 (mm); Maximum Insertion Loss: 5.5 dB; Mounting Type: SURFACE MOUNT; I/O Impedance: 330 OHM;
SFECV10.7MA5S-Z
CERAMIC BPF; Mounting Type: SURFACE MOUNT; Attenuation At Maximum Frequency: 20 dB; Manufacturer Series: SFECV10.7; Dimensions: L6.9XB2.9XH1.5 (mm); Height: 1.5 mm;
SFECV10.7MJS-Z
CERAMIC BPF; Mounting Type: SURFACE MOUNT; Attenuation At Maximum Frequency: 20 dB; Length: 6.9 mm; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Maximum No. of Sections: 2;
SFECV10M7GA00-R0
CERAMIC BPF; I/O Impedance: 330 OHM; Width (mm): 2.9; JESD-609 Code: e4; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Terminal Finish: Silver (Ag);
SFECV10M7HA00-R0
CERAMIC BPF; JESD-609 Code: e4; I/O Impedance: 330 OHM; Additional Features: 2 ELEMENTS THICKNESS LONGITUDINAL VIBRATION; CHIP TYPE; TAPE AND REEL; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Manufacturer Series: SFECV;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved