Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's SFECS13M0SF0023-R0 is a Ceramic BPF filter with 5 dB attenuation at 13 MHz. It has a max insertion loss of 6 dB and operates at an I/O impedance of 330Ω. Ideal for surface mount applications, it provides 250 kHz attenuation frequency for effective signal filtering.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Aztec Data Supply Inc.
$0.651
Corohmni
$1.353
AZTECH Wire
$19.269
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Ceramic filters are known for their high Q factor, providing excellent selectivity and minimal insertion loss.
Low attenuation at maximum frequency ensures that the filter effectively suppresses unwanted signals.
Low insertion loss means that the filter does not significantly degrade the signal passing through it.
The cutoff frequency of 13 MHz allows for precise filtering of signals around this frequency.
Surface mounting type makes the filter easy to install and saves space on the PCB.
Having a specific I/O impedance of 330 ohms ensures proper matching with the circuit, optimizing signal transfer.
The filter provides high attenuation at frequencies ±250 kHz from the center frequency, further enhancing its selectivity.
Ceramic Filters SFECS13M0SF0023-R0 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Additional Features:
Maximum Attenuation Frequency (± Δf):
Attenuation At Maximum Frequency:
Center/Cutoff Frequency (fo/fc):
Filter Type:
I/O Impedance:
Maximum Insertion Loss:
Mounting Type:
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Bourns
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Continental Device India
6530BP44A1190E
Johanson Dielectrics
Johanson Dielectrics' 6530BP44A1190E is a Ceramic BPF filter with 3dB max insertion loss, operating from -40 to 85°C. Ideal for surface mount applications at 6525 MHz, it has an average input power of 3W and impedance of 50Ω.
5697BP44A0360E
Johanson Dielectrics' 5697BP44A0360E is a Ceramic BPF filter with 5662.5 MHz center frequency, 2.5 dB insertion loss, and 3 W power rating. Ideal for surface mount applications in the temperature range of -40 to 85°C, it features silver/platinum terminal finish and TR packing method.
LFCN-1700
Mini-circuits
The Mini-circuits LFCN-1700 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter provides low insertion loss of 3 dB and can handle an average input power of 10 W.
DFC3R836P025BHD
Murata Manufacturing
Murata Manufacturing's DFC3R836P025BHD is a Ceramic BPF filter with 2.6 dB max insertion loss at 836.5 MHz. Operating b/w -30°C to 85°C, it features gold terminal finish and surface mounting type. Ideal for applications requiring precise frequency filtering in compact spaces.
SFECV10M7JA00-R0
Murata's SFECV10M7JA00-R0 is a Ceramic BPF filter with 5.5 dB max insertion loss at 10.7 MHz. Featuring silver terminal finish, it has dimensions of L6.9xB2.9xH1.5 mm and an I/O impedance of 330Ω, ideal for surface mount applications in RF circuits.
CFX455F
Murata Manufacturing's CFX455F is a Ceramic BPF filter with 70 dB attenuation at max frequency of 0.455 MHz. With dimensions of L10.8xB7xH9.5 (mm), it operates b/w -20 to 80 °C, offering 6 dB insertion loss and I/O impedance of 1500 OHM. Ideal for applications requiring precise filtering in narrowband communication systems.
HFCN-880D
The Mini-circuits HFCN-880D is a Ceramic HPF filter with 4 terminals, offering attenuation up to 40 dB at 380 kHz. With a center frequency of 880 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring high-frequency filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50Ω and can handle an average input power of 7W.
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
2450FM07B0037T
Johanson Technology
Johanson Technology's 2450FM07B0037T is a Ceramic LPF filter with a center frequency of 2450 MHz and max insertion loss of 0.8 dB. Ideal for applications requiring high input power up to 3 W, it operates in temperatures ranging from -40°C to 85°C. Suitable for surface mount installations with an impedance of 50Ω.
SFSRA6M00DF00-B0
Murata Manufacturing's SFSRA6M00DF00-B0 is a Ceramic BPF filter with 20 dB attenuation at 6 MHz. Featuring 6 dB max insertion loss, it has dimensions of L10xB4xH7 mm and I/O impedance of 470 OHM. Ideal for applications requiring precise filtering at high frequencies.
CFWLA450KGFA-B0
Murata Manufacturing's CFWLA450KGFA-B0 is a Ceramic BPF filter with 6 dB max insertion loss at 0.45 MHz. Measuring 11x7x7.5 mm, it has an I/O impedance of 2000 ohm and is mounted through hole. Ideal for applications requiring precise frequency filtering in compact spaces.
2450BM14G0011T
2450BM14G0011T by Johanson Technology is a Ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates b/w -40°C to 85°C, has dimensions of 1.6x0.8x0.6 mm, and is ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
2450LP14B100T
2450LP14B100T by Johanson Technology is a Ceramic LPF filter with 6 terminals, operating from -40 to 85°C. It offers a max insertion loss of 0.5 dB at 2450 MHz and can handle up to 3W input power. Ideal for surface mount applications in need of a compact filter with an impedance of 50Ω.
ABSGS4C7-CDGM3B8M
Abracon
ABS Ceramic Filter ABSGS4C7-CDGM3B8M by Abracon offers DIELECTRIC BPF type with 2.7 dB Max Insertion Loss and 7240 MHz Center Frequency. Ideal for applications requiring a compact design, it operates b/w -40 to 105°C temperatures with 50 OHM I/O Impedance.
LFB182G45CL3D264
Murata Manufacturing's LFB182G45CL3D264 is a Ceramic BPF filter with 1.25 dB max insertion loss, 2450 MHz center frequency, and 85°C max operating temp. Ideal for surface mount applications in electronics requiring a compact ceramic filter with 50 OHM impedance.
LFCN-80D
LFCN-80D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering 40 dB attenuation at max frequency of 550 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for applications requiring high-frequency filtering in compact spaces like RF communication systems.
SFSKA6M50CF00-R3
Murata Manufacturing's SFSKA6M50CF00-R3 is a Ceramic BPF filter with 3 terminals, gold finish. It operates b/w -20°C to 80°C, has 6dB insertion loss at 6.5MHz. Ideal for applications requiring a surface mount ceramic filter with an impedance of 470Ω.
BFU455K
Murata Manufacturing's BFU455K is a Ceramic BPF filter with 2 terminals, offering 12 dB attenuation at max frequency of 0.455 MHz. With dimensions of L7xB3.5xH9 mm, it is designed for through hole mounting applications and provides max attenuation at ±9 kHz frequency range.
LFCN-320D+
LFCN-320D+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 180000 kHz. Operating b/w -55 to 100 °C, it has a center frequency of 460 MHz and max insertion loss of 3 dB. Ideal for applications requiring surface mount filters with 50 OHM impedance.
LFCN-120+
LFCN-120+ by Mini-circuits is a Ceramic LPF filter with 40 dB attenuation at max frequency of 195 MHz. With a VSWR of 1.2, it operates b/w -55 to 100 °C and has a compact size of L3.2XB1.6XH0.94 mm making it ideal for surface mount applications in RF circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SFECF10M7EA00-R0
CERAMIC BPF; Length: 3.45 mm; Center/Cutoff Frequency (fo/fc): 10.7 MHz; I/O Impedance: 330 OHM; Minimum Operating Temperature: -20 Cel; Width (mm): 3.1;
SFECF10M7GA00-R0
CERAMIC BPF; Length: 3.45 mm; Width (mm): 3.1; Maximum Operating Temperature: 80 Cel; I/O Impedance: 330 OHM; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch);
SFECV10M7KA00-R0
CERAMIC BPF; Maximum Operating Temperature: 80 Cel; I/O Impedance: 330 OHM; Maximum Insertion Loss: 6 dB; Width (mm): 2.9; Terminal Finish: Silver (Ag);
SFECF10M7FA00-R0
CERAMIC BPF; No. of Terminals: 6; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Height: 1.3 mm; Maximum Operating Temperature: 80 Cel;
SFECF10M7HA00-R0
CERAMIC BPF; Width (mm): 3.1; Minimum Operating Temperature: -20 Cel; Height: 1.3 mm; Dimensions: L3.45XB3.1XH1.3 (mm)/L0.136XB0.122XH0.051 (inch); Maximum Insertion Loss: 4 dB;
SFECV10M7FA00-R0
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Width (mm): 2.9; Length: 6.9 mm; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 3 dB;
CERAMIC BPF; Length: 6.9 mm; Terminal Finish: Silver (Ag); Additional Features: 2 ELEMENTS THICKNESS LONGITUDINAL VIBRATION; CHIP TYPE; TAPE AND REEL; Width (mm): 2.9; JESD-609 Code: e4;
SFECS13M0SF0021-R0
CERAMIC BPF; Attenuation At Maximum Frequency: 5 dB; Mounting Type: SURFACE MOUNT; I/O Impedance: 330 OHM; Manufacturer Series: SFECS; Additional Features: 2 ELEMENTS; CHIP TYPE; TAPE AND REEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved