Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CERAMIC BPF; I/O Impedance: 330 OHM; Length: 3.45 mm; Center/Cutoff Frequency (fo/fc): 10.7 MHz; Height: 1.3 mm; Width (mm): 3.1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Legend Electronics Inc.
1+ parts
100+ parts
1k+ parts
10k+ parts
Ceramic Filters SFECF10M7HF00-R0 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Semiconductor
ERJ3EKF1002V
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LFCG-92+
Mini-circuits
LFCG-92+ by Mini-circuits is a Ceramic LPF filter with a center frequency of 495 MHz and 50 OHM impedance. It features Tin (Sn) finish with Nickel (Ni) barrier, suitable for surface mount applications. Its compact dimensions make it ideal for RF signal filtering in small electronic devices.
SFECS13M0SF0023-R0
Murata Manufacturing
Murata Manufacturing's SFECS13M0SF0023-R0 is a Ceramic BPF filter with 5 dB attenuation at 13 MHz. It has a max insertion loss of 6 dB and operates at an I/O impedance of 330Ω. Ideal for surface mount applications, it provides 250 kHz attenuation frequency for effective signal filtering.
LFCN-2250
LFCN-2250 by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2575 MHz and offers attenuation of up to 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 325000 kHz and an I/O impedance of 50 ohms.
LFCN-1200D+
LFCN-1200D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 470 kHz. With a center frequency of 1530 MHz and insertion loss of 3 dB, it's ideal for applications requiring surface mount filters in the 50 Ohm impedance range.
LFCN-2250D+
LFCN-2250D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20 dB at min frequency and 30 dB at max frequency. With a center frequency of 2575 MHz, it is ideal for RF applications requiring high attenuation and low insertion loss in a compact surface mount design.
773-0055
Oscilent
CERAMIC BPF; Manufacturer Series: 773;
DFC3R836P025BHD
Murata Manufacturing's DFC3R836P025BHD is a Ceramic BPF filter with 2.6 dB max insertion loss at 836.5 MHz. Operating b/w -30°C to 85°C, it features gold terminal finish and surface mounting type. Ideal for applications requiring precise frequency filtering in compact spaces.
LFCN-6000
LFCN-6000 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 1.7 GHz. With a center frequency of 6.8 GHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50 ohms and VSWR of 1.3 for efficient signal processing.
LFB18868MBG9E212
Murata Manufacturing's LFB18868MBG9E212 is a Ceramic BPF filter with 869.5 MHz fo/fc, -40 to 85 °C operating temp range, and 0.5 W power input. Ideal for RF applications due to its compact size of 1.6mm x 0.8mm x 0.65mm and TR, PAPER, 7 INCH packing method.
LFCN-2250+
LFCN-2250+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 2575 MHz. It operates b/w -55 to 100 °C and has a VSWR of 1.2, making it ideal for RF applications requiring precise filtering in compact spaces. With dimensions of L3.2XB1.6XH0.94 mm, this surface mount filter offers low insertion loss and high power handling capabilities up to 10 W.
5697BP44A0360E
Johanson Dielectrics
Johanson Dielectrics' 5697BP44A0360E is a Ceramic BPF filter with 5662.5 MHz center frequency, 2.5 dB insertion loss, and 3 W power rating. Ideal for surface mount applications in the temperature range of -40 to 85°C, it features silver/platinum terminal finish and TR packing method.
CFUCG455KF4X-R0
Murata Manufacturing's CFUCG455KF4X-R0 is a Ceramic BPF filter with 6 dB max insertion loss and 0.455 MHz center frequency. Operating b/w -20°C to 80°C, it has a compact size of L6xB4xH7.5 mm for surface mount applications with 1500 Ohm impedance.
2450BM14G0011T
Johanson Technology
2450BM14G0011T by Johanson Technology is a Ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates b/w -40°C to 85°C, has dimensions of 1.6x0.8x0.6 mm, and is ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
HFCN-2700AD+
Mini-circuits' HFCN-2700AD+ is a Ceramic HPF filter with 20 dB attenuation at 2700 MHz. With 6 terminals and MIL-STD-202 screening, it has a VSWR of 1.5 and can handle up to 7W input power. Ideal for surface mount applications in RF systems requiring high-frequency filtering.
LFCN-6000+
LFCN-6000+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 6800 MHz. With a VSWR of 1.3, it operates b/w -55 to 100 °C and has a compact size of L3.2xB1.6xH0.94 mm, making it ideal for RF applications requiring precise filtering in limited space.
CDBM455C7
Murata Manufacturing's CDBM455C7 is a Ceramic BPF filter with 0.455 MHz center frequency, -20 to 80°C operating range, and dimensions of L6xB3xH6 mm. Ideal for through-hole mounting applications in various electronic devices.
BFHK-1572+
Mini-circuits BFHK-1572+ is a Ceramic BPF with 15.6 MHz fo/fc, 4 dB max insertion loss, and 1 W avg input power. Ideal for RF applications, it operates b/w -55 to 125 °C, has a compact size of 3.2mm x 4.5mm x 1.49mm, and features surface mounting type.
BFCN-8650+
BFCN-8650+ by Mini-circuits is a ceramic BPF filter with 4 terminals. It offers 30 dB attenuation at 8650 MHz, with a max insertion loss of 3.5 dB. Ideal for applications requiring high-frequency filtering in compact spaces, such as RF communication systems.
0900PC15A0036E
Johanson Dielectrics' 0900PC15A0036E is a ceramic BPF filter with a center frequency of 2450 MHz. It has a max insertion loss of 2 dB and can handle an average input power of 3 W. This surface mount filter is commonly used in applications requiring a 50 OHM impedance, such as wireless communication systems.
HFCN-5500D
The Mini-circuits HFCN-5500D is a Ceramic HPF filter with 6 terminals, offering 20 dB attenuation at 5500 MHz. With a max insertion loss of 3 dB and VSWR of 1.5, it's ideal for RF applications requiring high-frequency filtering in a compact surface-mount design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved