Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LFB182G45CGFD436 is a Ceramic BPF filter with 2.8 dB max insertion loss, 2450 MHz center frequency, and 1.7 VSWR. Ideal for applications requiring a compact design and high performance in the 50 OHM impedance range.
Median Price
$0.092
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Chip Stock
Cyclops Electronics Ltd
Nova Conductors
Corohmni
$1.457
Alle Elektronik GmbH
Netroflash
Ceramic filters offer superior performance and reliability compared to other types of filters, making them a popular choice for high-frequency applications.
With a high maximum operating temperature, this ceramic filter can withstand harsh environmental conditions without sacrificing performance.
The low minimum operating temperature ensures that this filter can still function effectively in cold environments or during temperature fluctuations.
The narrow width allows for compact and space-saving designs in electronic circuits or systems.
With a low maximum insertion loss, this ceramic filter helps maintain signal integrity and reduce power loss in the filtering process.
The specific frequency range of this filter makes it suitable for applications requiring filtering or signal processing within the 2450 MHz frequency band.
The low VSWR indicates good impedance matching and minimal signal reflection, ensuring efficient signal transmission through the filter.
The compact length of this ceramic filter contributes to its overall small footprint and ease of integration into electronic devices or systems.
With a moderate average input power rating, this filter can handle typical power levels in many RF applications without experiencing performance degradation.
The specified packing method ensures that the ceramic filters are conveniently packaged and protected during handling, storage, and transportation.
The standard 50 ohm impedance matches common RF system requirements and simplifies integration with other components in the signal chain.
The low profile of this ceramic filter allows for flexible mounting and placement options in electronic assemblies, contributing to overall design versatility.
Ceramic Filters LFB182G45CGFD436 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Voltage Standing Wave Ratio:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
TSB1N18D2G00LV0H7T
Taiyo Yuden
TSB1N18D2G00LV0H7T by Taiyo Yuden is a Ceramic BPF filter with 1.8 dB max insertion loss, 2002.5 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in temperature range -40 to 85 °C, commonly used in RF communication systems.
HFCN-2700AD+
Mini-circuits
Mini-circuits' HFCN-2700AD+ is a Ceramic HPF filter with 20 dB attenuation at 2700 MHz. With 6 terminals and MIL-STD-202 screening, it has a VSWR of 1.5 and can handle up to 7W input power. Ideal for surface mount applications in RF systems requiring high-frequency filtering.
LFCN-6000+
LFCN-6000+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 6800 MHz. With a VSWR of 1.3, it operates b/w -55 to 100 °C and has a compact size of L3.2xB1.6xH0.94 mm, making it ideal for RF applications requiring precise filtering in limited space.
LFB212G49SG8B830
Murata Manufacturing
Murata Manufacturing's LFB212G49SG8B830 is a Ceramic BPF filter with 2.6 dB max insertion loss, 2495 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in electronics requiring precise filtering at temperatures ranging from -40 to 85 °C.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
LFCN-6000D
LFCN-6000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.7 GHz. With a center frequency of 6.8 GHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50 ohms and dimensions of L3.2xB1.6xH0.94 mm.
773-0055
Oscilent
CERAMIC BPF; Manufacturer Series: 773;
LFCN-1575D
LFCN-1575D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 4925000 kHz. With a center frequency of 1875 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with dimensions of L3.2XB1.6XH0.94 mm.
LFCN-3800
The Mini-circuits LFCN-3800 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.45 GHz. With a compact size of 3.2x1.6x0.94 mm, it's ideal for surface mount applications in RF circuits requiring precise filtering at frequencies up to 4.85 GHz.
LFCN-320D
LFCN-320D by Mini-circuits is a Ceramic LPF filter with 4 terminals. It offers 40 dB attenuation at max frequency of 2040 kHz and has a center frequency of 460 MHz. Ideal for applications requiring high attenuation and precise filtering in compact spaces.
LFCN-1000D+
LFCN-1000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
LFCN-1800D+
LFCN-1800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, attaining 40 dB attenuation at max frequency of 875 kHz. With a center frequency of 2125 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces.
LFCN-1575D+
LFCN-1575D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 500 kHz. With a center frequency of 1825 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
CDB455C16
Telcona Ag
CERAMIC BPF; Minimum Operating Temperature: -20 Cel; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 80 Cel; Center/Cutoff Frequency (fo/fc): .455 MHz; Dimensions: L7XB3.5XH9 (mm);
LFCN-80+
LFCN-80+ by Mini-circuits is a ceramic LPF filter with a center frequency of 145 MHz and attenuation of 20 dB at min frequency and 40 dB at max frequency. It is used in applications requiring surface mount filters with a wide operating temperature range (-55 to 100 °C) and low insertion loss (3 dB).
ABSGS4C7-CDGM3B8M
Abracon
ABS Ceramic Filter ABSGS4C7-CDGM3B8M by Abracon offers DIELECTRIC BPF type with 2.7 dB Max Insertion Loss and 7240 MHz Center Frequency. Ideal for applications requiring a compact design, it operates b/w -40 to 105°C temperatures with 50 OHM I/O Impedance.
BFCN-8650+
BFCN-8650+ by Mini-circuits is a ceramic BPF filter with 4 terminals. It offers 30 dB attenuation at 8650 MHz, with a max insertion loss of 3.5 dB. Ideal for applications requiring high-frequency filtering in compact spaces, such as RF communication systems.
LFCN-1000D
LFCN-1000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring high attenuation and low insertion loss in a compact surface-mount design.
LFCN-80
The Mini-circuits LFCN-80 is a ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 80 kHz. With a center frequency of 145 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and an input power rating of 8.5 W.
LFCN-1700+
LFCN-1700+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 450 kHz. Operating from -55 to 100°C, it has a center frequency of 2050 MHz and VSWR of 1.2, ideal for surface mount applications in RF circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFB18868MBG9E212
Murata Manufacturing's LFB18868MBG9E212 is a Ceramic BPF filter with 869.5 MHz fo/fc, -40 to 85 °C operating temp range, and 0.5 W power input. Ideal for RF applications due to its compact size of 1.6mm x 0.8mm x 0.65mm and TR, PAPER, 7 INCH packing method.
LFB185G54CGLD602
CERAMIC BPF; Average Input Power: .5 W; Center/Cutoff Frequency (fo/fc): 5425 MHz; Maximum Insertion Loss: 1 dB; Width (mm): 0.8; Length: 1.6 mm;
LFB182G45CL3D264
CERAMIC BPF; Average Input Power: 1 W; Voltage Standing Wave Ratio: 2; Minimum No. of Sections: 1; Maximum Insertion Loss: 1.25 dB; Width (mm): 0.8;
LFB182G45SG9A213
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2450 MHz; Maximum No. of Sections: 1; Height: .7 mm; Mounting Type: SURFACE MOUNT; Length: 1.6 mm;
LFB182G45BG4D268
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Length: 1.6 mm; Maximum No. of Sections: 1; Minimum No. of Sections: 1; Width (mm): 0.8;
LFB182G45BG5D920
Murata Manufacturing's LFB182G45BG5D920 is a Ceramic BPF filter with 1.8 dB max insertion loss, 2450 MHz center frequency, and -40 to 85°C operating range. Ideal for applications requiring a compact (1.6mm x 0.8mm x 0.65mm) and high-performance filter with 50Ω impedance handling up to 0.5W input power in TR/PAPER packaging.
LFB182G45BG7D948
CERAMIC BPF; Average Input Power: .5 W; Width (mm): 0.8; Maximum Insertion Loss: 3.25 dB; I/O Impedance: 50 OHM; Minimum Operating Temperature: -40 Cel;
LFB182G45SG9A293
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2450 MHz; Maximum No. of Sections: 1; Maximum Insertion Loss: 2.7 dB; Average Input Power: .5 W; Maximum Operating Temperature: 85 Cel;
LFB182G45BG4D729
CERAMIC BPF; Length: 1.6 mm; Minimum No. of Sections: 1; Average Input Power: .5 W; Width (mm): 0.8; Packing Method: TR, PAPER, 7 INCH;
LFB182G45CE6D043
CERAMIC BPF; Voltage Standing Wave Ratio: 2.1; Maximum No. of Sections: 1; Packing Method: TR, PAPER, 7 INCH; Width (mm): 0.8; Average Input Power: .5 W;
LFB182G45SG9E181
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2450 MHz; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT; Height: .7 mm; Maximum Operating Temperature: 85 Cel;
LFB182G45SG9B740
CERAMIC BPF; Mounting Type: SURFACE MOUNT; Voltage Standing Wave Ratio: 2; Length: 1.6 mm; Maximum Operating Temperature: 85 Cel; Width (mm): 0.8;
LFB182G45BG1D073
CERAMIC BPF; Width (mm): 0.8; Mounting Type: SURFACE MOUNT; Minimum No. of Sections: 1; I/O Impedance: 50 OHM; Packing Method: TR, EMBOSSED, 7 INCH;
LFB182G45CH1D045
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Packing Method: TR, PAPER, 7 INCH; Minimum No. of Sections: 1; Mounting Type: SURFACE MOUNT; Width (mm): 0.8;
LFB182G45CL1D194
CERAMIC BPF; Maximum Operating Temperature: 85 Cel; Maximum No. of Sections: 1; Length: 1.6 mm; I/O Impedance: 50 OHM; Packing Method: TR, PAPER, 7 INCH;
LFB182G45CL3D178
Murata Manufacturing's LFB182G45CL3D178 is a Ceramic BPF filter with 1.25 dB max insertion loss, 2450 MHz center frequency, and -40 to 85 °C operating temperature range. Ideal for surface mount applications in electronics requiring a compact ceramic filter with 50 OHM impedance.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved