Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LFB182G45BG5D920 is a Ceramic BPF filter with 1.8 dB max insertion loss, 2450 MHz center frequency, and -40 to 85°C operating range. Ideal for applications requiring a compact (1.6mm x 0.8mm x 0.65mm) and high-performance filter with 50Ω impedance handling up to 0.5W input power in TR/PAPER packaging.
Median Price
$0.189
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
TTI Europe
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Vyrian
Chip Stock
Netroflash
$0.185
Perfect Parts
Authorized Procurement Solutions
Alle Elektronik GmbH
iodParts Technologies Inc.
Kepictronics
Ceramic filters are known for their high quality and reliability, making them a good choice for various applications.
The high maximum operating temperature ensures the filter can handle a wide range of conditions without performance degradation.
The low minimum operating temperature allows the filter to function in cold environments without issues.
The compact width makes this filter suitable for applications where space is limited.
The low insertion loss ensures minimal signal degradation when passing through the filter.
The specific frequency rating makes this filter ideal for applications that require filtering in the 2450 MHz range.
The short length of the filter contributes to a compact design, making it suitable for small devices.
The filter can handle an average input power of 0.5 watts, making it suitable for low to moderate power applications.
The specified packing method ensures safe transportation and storage of the filter before installation.
The 50 ohm impedance is a common standard in RF applications, allowing for easy integration with existing systems.
The low height of the filter contributes to its compact design, making it suitable for space-constrained applications.
Ceramic Filters LFB182G45BG5D920 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Rugao Dachang Electronic
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Gulf Semiconductor
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Starsea Electronics
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFCN-800
Mini-circuits
LFCN-800 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 510 MHz. With a center frequency of 990 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
B096QC2S
Knowles Precision Devices
B096QC2S by Knowles Precision Devices is a Ceramic BPF filter with 3dB max insertion loss, 10,000 MHz center frequency, and -55 to 125°C operating temperature range. Ideal for surface mount applications in need of a compact (4.57mm x 10.86mm x 2.54mm) ceramic filter with 50Ω impedance.
CER0357C
Cts
Cts CER0357C is a Ceramic BPF filter with 2 terminals, offering 22 dB attenuation at 1575 MHz. With a max insertion loss of 1.7 dB and operating temperature range from -40 to 85 °C, it's ideal for surface mount applications requiring high-frequency filtering.
LFCN-320D
LFCN-320D by Mini-circuits is a Ceramic LPF filter with 4 terminals. It offers 40 dB attenuation at max frequency of 2040 kHz and has a center frequency of 460 MHz. Ideal for applications requiring high attenuation and precise filtering in compact spaces.
CDSCB10M7GA119-R0
Murata Manufacturing
Murata Manufacturing's CDSCB10M7GA119-R0 is a Ceramic BPF filter with 2 terminals, measuring L4.5xB2.0xH1.0 mm. It operates at 10.7 MHz and is ideal for surface mount applications in electronic devices requiring precise frequency filtering capabilities.
LFCN-1000
LFCN-1000 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
HFCN-880D+
The Mini-circuits HFCN-880D+ is a Ceramic HPF filter with 40 dB attenuation at 380 MHz. With a VSWR of 1.5, it operates b/w -55°C to 100°C and has a max insertion loss of 3 dB. Ideal for RF applications requiring high-frequency filtering in compact spaces.
2450LP14B100T
Johanson Technology
2450LP14B100T by Johanson Technology is a Ceramic LPF filter with 6 terminals, operating from -40 to 85°C. It offers a max insertion loss of 0.5 dB at 2450 MHz and can handle up to 3W input power. Ideal for surface mount applications in need of a compact filter with an impedance of 50Ω.
SFECV10M7FA00-R0
Murata's SFECV10M7FA00-R0 is a Ceramic BPF filter with 3dB insertion loss at 10.7 MHz. With dimensions of L6.9xB2.9xH1.5 mm, it has a terminal finish of Silver (Ag) and an I/O impedance of 330Ω. Ideal for surface mount applications in RF circuits for signal filtering and noise suppression.
L185XF4S
The Knowles Precision Devices L185XF4S is a Ceramic LPF filter with a center frequency of 18.5 GHz and max insertion loss of 2.2 dB. Operating b/w -55°C to 125°C, it has an impedance of 50Ω and VSWR of 1.4, making it ideal for panel mount applications in RF systems.
LFCN-6000D+
LFCN-6000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20dB at min frequency and 30dB at max frequency. With a center frequency of 6800MHz, it has a VSWR of 1.3 and can handle an average input power of 9W. Ideal for applications requiring precise filtering in RF circuits.
6530BP44A1190E
Johanson Dielectrics
Johanson Dielectrics' 6530BP44A1190E is a Ceramic BPF filter with 3dB max insertion loss, operating from -40 to 85°C. Ideal for surface mount applications at 6525 MHz, it has an average input power of 3W and impedance of 50Ω.
LFCN-1700D+
LFCN-1700D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
1400BP41A0550E
1400BP41A0550E by Johanson Technology is a Ceramic BPF filter with 2dB max insertion loss, 1400MHz center frequency, and -40 to 85°C operating range. Ideal for surface mount applications in systems requiring a compact 75Ω impedance filter.
LFCN-6000D
LFCN-6000D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.7 GHz. With a center frequency of 6.8 GHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50 ohms and dimensions of L3.2xB1.6xH0.94 mm.
2450LP07C0100T
2450LP07C0100T by Johanson Technology is a Ceramic LPF filter with a center frequency of 2450 MHz and max insertion loss of 0.7 dB. It operates b/w -40 to 85 °C, has an I/O impedance of 50 OHM, and can handle up to 3 W average input power. Ideal for surface mount applications in various electronic devices.
LFCN-120
LFCN-120 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 105 MHz. With a center frequency of 195 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in compact spaces. Operating from -55°C to 100°C, this surface-mount filter has dimensions of L3.2xB1.6xH0.94 mm and can handle an average input power of 8.5 W efficiently.
CFWLA455KHFA-B0
Golledge Electronics
CERAMIC BPF; Length: 11.5 mm; Dimensions: L11.5XB7.5XH8 (mm); Additional Features: BULK; HIGH SELECTIVITY; Width (mm): 7.5; Maximum Insertion Loss: 6 dB;
CFM455A
Murata Manufacturing's CFM455A is a Ceramic BPF filter with 60 dB attenuation at 30 kHz. With a center frequency of 0.455 MHz, it offers 3 dB max insertion loss and dimensions of L20xB7.5xH10.5 mm. Ideal for applications requiring precise filtering in through-hole mounting setups with an I/O impedance of 1000 OHM OHM OHM.
5515BP15B725
Johanson Technology's 5515BP15B725 is a Ceramic BPF filter with fo/fc at 5512.5 MHz and max insertion loss of 1.5 dB. Operating temp ranges from -40 to 85 °C, making it ideal for surface mount applications in RF circuits. Dimensions: L2.0xB1.25xH0.85 mm (L0.079xB0.049xH0.033 inch).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFB18868MBG9E212
Murata Manufacturing's LFB18868MBG9E212 is a Ceramic BPF filter with 869.5 MHz fo/fc, -40 to 85 °C operating temp range, and 0.5 W power input. Ideal for RF applications due to its compact size of 1.6mm x 0.8mm x 0.65mm and TR, PAPER, 7 INCH packing method.
LFB182G45CL3D178
Murata Manufacturing's LFB182G45CL3D178 is a Ceramic BPF filter with 1.25 dB max insertion loss, 2450 MHz center frequency, and -40 to 85 °C operating temperature range. Ideal for surface mount applications in electronics requiring a compact ceramic filter with 50 OHM impedance.
LFB182G45CGFD436
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2450 MHz; I/O Impedance: 50 OHM; Maximum Insertion Loss: 2.8 dB; Minimum No. of Sections: 1; Packing Method: TR, PAPER, 7 INCH;
LFB182G45CL3D264
CERAMIC BPF; Average Input Power: 1 W; Voltage Standing Wave Ratio: 2; Minimum No. of Sections: 1; Maximum Insertion Loss: 1.25 dB; Width (mm): 0.8;
LFB185G54CGLD602
CERAMIC BPF; Average Input Power: .5 W; Center/Cutoff Frequency (fo/fc): 5425 MHz; Maximum Insertion Loss: 1 dB; Width (mm): 0.8; Length: 1.6 mm;
LFB182G45SG9A213
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2450 MHz; Maximum No. of Sections: 1; Height: .7 mm; Mounting Type: SURFACE MOUNT; Length: 1.6 mm;
LFB182G45BG4D268
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Length: 1.6 mm; Maximum No. of Sections: 1; Minimum No. of Sections: 1; Width (mm): 0.8;
LFB182G45BG7D948
CERAMIC BPF; Average Input Power: .5 W; Width (mm): 0.8; Maximum Insertion Loss: 3.25 dB; I/O Impedance: 50 OHM; Minimum Operating Temperature: -40 Cel;
LFB182G45SG9A293
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2450 MHz; Maximum No. of Sections: 1; Maximum Insertion Loss: 2.7 dB; Average Input Power: .5 W; Maximum Operating Temperature: 85 Cel;
LFB182G45BG4D729
CERAMIC BPF; Length: 1.6 mm; Minimum No. of Sections: 1; Average Input Power: .5 W; Width (mm): 0.8; Packing Method: TR, PAPER, 7 INCH;
LFB182G45CE6D043
CERAMIC BPF; Voltage Standing Wave Ratio: 2.1; Maximum No. of Sections: 1; Packing Method: TR, PAPER, 7 INCH; Width (mm): 0.8; Average Input Power: .5 W;
LFB182G45SG9E181
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2450 MHz; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT; Height: .7 mm; Maximum Operating Temperature: 85 Cel;
LFB182G45SG9B740
CERAMIC BPF; Mounting Type: SURFACE MOUNT; Voltage Standing Wave Ratio: 2; Length: 1.6 mm; Maximum Operating Temperature: 85 Cel; Width (mm): 0.8;
LFB182G45BG1D073
CERAMIC BPF; Width (mm): 0.8; Mounting Type: SURFACE MOUNT; Minimum No. of Sections: 1; I/O Impedance: 50 OHM; Packing Method: TR, EMBOSSED, 7 INCH;
LFB182G45CH1D045
CERAMIC BPF; Minimum Operating Temperature: -40 Cel; Packing Method: TR, PAPER, 7 INCH; Minimum No. of Sections: 1; Mounting Type: SURFACE MOUNT; Width (mm): 0.8;
LFB182G45CL1D194
CERAMIC BPF; Maximum Operating Temperature: 85 Cel; Maximum No. of Sections: 1; Length: 1.6 mm; I/O Impedance: 50 OHM; Packing Method: TR, PAPER, 7 INCH;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved