Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Mini-circuits BFCN-3085A+ is a Ceramic BPF filter with 4 terminals, operating from -55 to 100°C. It offers a max insertion loss of 2.5 dB at 3085 MHz and VSWR of 3, suitable for surface mount applications in RF circuits with 50 Ohm impedance.
Median Price
$17.035
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
$16.620
100+ parts
$7.212
1k+ parts
$6.426
10k+ parts
$5.484
Mouser Electronics
$17.450
$6.920
$5.760
$5.610
Nova Conductors
$10.855
-
Vyrian
Aranea Global
$10.638
$10.212
Continental Prestige Electronics
Argo Parts USA
Glotronic Ltd.
Authorized Procurement Solutions
Perfect Parts
More terminals allow for better connectivity and signal transmission.
Ceramic filters are known for their high performance and reliability in filtering out unwanted frequencies.
Can withstand high temperatures without affecting performance.
Can operate in very low temperature environments.
Compact size makes it suitable for various applications where space is limited.
Low insertion loss ensures minimal signal loss during filtering.
Ideal for filtering signals around this frequency range.
Low VSWR indicates efficient power transfer and minimal signal reflection.
Small length helps in saving space and allows for versatile installation options.
Can handle relatively high input power levels.
Surface mount configuration offers easy and secure installation on circuit boards.
Matches commonly used impedance in RF applications, ensuring proper signal transmission.
Compact dimensions make it suitable for small electronic devices or circuitry.
Low profile design enables installation in slim devices or tight spaces.
Ceramic Filters BFCN-3085A+ attributes and parameters. Explore more Ceramic Filters devices from Mini-circuits
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Voltage Standing Wave Ratio:
Width (mm):
BFCN-3085A+ Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Product Change Notification (PDF)
Founded in 1968 by Harvey Kaylie, Mini-Circuits is a global leader in the design, manufacture, and distribution of RF and microwave components and integrated assemblies. With design, manufacturing and sales locations in over 30 countries, Mini-Circuits offers 27 product lines comprising over 10,000 active models. Mini-Circuits products are used widely in commercial, industrial, and military applications including: cellular wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID, test instrumentation, diagnostic imaging and many more. Over the last 50 years, demanding quality standards, innovative design capabilities, world-class customer service and long-term stability have made Mini-Circuits the preferred supplier to over 20,000 customers worldwide.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
International Semiconductor
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
1400BP41A0550E
Johanson Technology
1400BP41A0550E by Johanson Technology is a Ceramic BPF filter with 2dB max insertion loss, 1400MHz center frequency, and -40 to 85°C operating range. Ideal for surface mount applications in systems requiring a compact 75Ω impedance filter.
LFB182G45CGFD436
Murata Manufacturing
Murata Manufacturing's LFB182G45CGFD436 is a Ceramic BPF filter with 2.8 dB max insertion loss, 2450 MHz center frequency, and 1.7 VSWR. Ideal for applications requiring a compact design and high performance in the 50 OHM impedance range.
BFU455K
Murata Manufacturing's BFU455K is a Ceramic BPF filter with 2 terminals, offering 12 dB attenuation at max frequency of 0.455 MHz. With dimensions of L7xB3.5xH9 mm, it is designed for through hole mounting applications and provides max attenuation at ±9 kHz frequency range.
LFCN-320D+
Mini-circuits
LFCN-320D+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at 180000 kHz. Operating b/w -55 to 100 °C, it has a center frequency of 460 MHz and max insertion loss of 3 dB. Ideal for applications requiring surface mount filters with 50 OHM impedance.
CDBM455C7
Murata Manufacturing's CDBM455C7 is a Ceramic BPF filter with 0.455 MHz center frequency, -20 to 80°C operating range, and dimensions of L6xB3xH6 mm. Ideal for through-hole mounting applications in various electronic devices.
LFB185G54CGLD602
Murata Manufacturing's LFB185G54CGLD602 is a Ceramic BPF filter with 1dB max insertion loss, 5425 MHz center frequency, and 85°C max operating temp. Ideal for applications requiring a compact (1.6mm x 0.8mm x 0.65mm) and high-performance filter in the 50Ω impedance range.
LFCN-1575D
LFCN-1575D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 4925000 kHz. With a center frequency of 1875 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with dimensions of L3.2XB1.6XH0.94 mm.
LFB18868MBG9E212
Murata Manufacturing's LFB18868MBG9E212 is a Ceramic BPF filter with 869.5 MHz fo/fc, -40 to 85 °C operating temp range, and 0.5 W power input. Ideal for RF applications due to its compact size of 1.6mm x 0.8mm x 0.65mm and TR, PAPER, 7 INCH packing method.
SFECF10M7FA00-R0
Murata's SFECF10M7FA00-R0 is a Ceramic BPF filter with 6 terminals, operating from -20 to 80°C. It offers a center frequency of 10.7 MHz and max insertion loss of 3 dB. Ideal for surface mount applications with an impedance of 330Ω, it measures L3.45xB3.1xH1.3 mm and is suitable for various electronic devices requiring precise signal filtering.
2450BM14G0011T
2450BM14G0011T by Johanson Technology is a Ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates b/w -40°C to 85°C, has dimensions of 1.6x0.8x0.6 mm, and is ideal for applications requiring a compact surface mount filter with an impedance of 50 ohms.
SFE10.7MS3-A
Murata's SFE10.7MS3-A is a Ceramic BPF filter with 20 dB attenuation at 10.7 MHz, 7 dB insertion loss, and 260 kHz max attenuation frequency. Measuring L7xB3xH7 mm, it has an I/O impedance of 330 OHM and is ideal for through hole mounting applications in electronic devices.
SFSRA6M00DF00-B0
Murata Manufacturing's SFSRA6M00DF00-B0 is a Ceramic BPF filter with 20 dB attenuation at 6 MHz. Featuring 6 dB max insertion loss, it has dimensions of L10xB4xH7 mm and I/O impedance of 470 OHM. Ideal for applications requiring precise filtering at high frequencies.
0896BM15A0001E
0896BM15A0001E by Johanson Technology is a Ceramic LPF filter with a center frequency of 895.5 MHz and max insertion loss of 1.55 dB. Operating b/w -40°C to 125°C, it's ideal for applications requiring a compact surface mount filter with an impedance of 50Ω and power handling capacity of 1W.
SFECF10M7HA00-R0
Murata's SFECF10M7HA00-R0 is a Ceramic BPF filter with 6 terminals, fo/fc of 10.7 MHz, and max insertion loss of 4 dB. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C with an impedance of 330Ω.
LFCN-1000
LFCN-1000 by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
0900PC15A0036E
Johanson Dielectrics
Johanson Dielectrics' 0900PC15A0036E is a ceramic BPF filter with a center frequency of 2450 MHz. It has a max insertion loss of 2 dB and can handle an average input power of 3 W. This surface mount filter is commonly used in applications requiring a 50 OHM impedance, such as wireless communication systems.
LFCW-5500+
LFCW-5500+ by Mini-circuits is a ceramic LPF filter with a center frequency of 6320 MHz and max insertion loss of 2 dB. It operates in temperatures ranging from -55 to 100 °C and has a compact size of 1.6 mm length, 0.8 mm width, and 0.6 mm height. This filter is ideal for applications requiring high-frequency signal filtering in surface mount configurations.
LFCN-1800D
LFCN-1800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 2125 MHz and an attenuation of 30 dB at max frequency. This surface mount filter is suitable for applications requiring a cutoff frequency of 300000 kHz and an I/O impedance of 50 Ω.
CFM455C
Murata Manufacturing's CFM455C is a Ceramic BPF filter with 60 dB attenuation at max 0.455 MHz frequency, and 6 dB at min 13 kHz. With dimensions of L20xB7.5xH10.5 mm, it's ideal for through-hole mounting in applications requiring precise frequency filtering like communication devices.
SFECS13M0SF0023-R0
Murata Manufacturing's SFECS13M0SF0023-R0 is a Ceramic BPF filter with 5 dB attenuation at 13 MHz. It has a max insertion loss of 6 dB and operates at an I/O impedance of 330Ω. Ideal for surface mount applications, it provides 250 kHz attenuation frequency for effective signal filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BFCN-1860+
BFCN-1860+ by Mini-circuits is a ceramic bandpass filter with a center frequency of 1860 MHz and max insertion loss of 3.5 dB. It has a temperature range from -55 to 100 °C and is suitable for surface mount applications in the 50 OHM impedance range, with SMA FEMALE output connector.
BFCN-8650+
BFCN-8650+ by Mini-circuits is a ceramic BPF filter with 4 terminals. It offers 30 dB attenuation at 8650 MHz, with a max insertion loss of 3.5 dB. Ideal for applications requiring high-frequency filtering in compact spaces, such as RF communication systems.
BFCN-2975+
CERAMIC BPF; Center/Cutoff Frequency (fo/fc): 2975 MHz; Maximum Insertion Loss: 3 dB; Voltage Standing Wave Ratio: 3; I/O Impedance: 50 OHM; Minimum Operating Temperature: -55 Cel;
BFCN-3085+
CERAMIC BPF; Maximum Insertion Loss: 2.5 dB; Height: .94 mm; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Voltage Standing Wave Ratio: 3; Width (mm): 1.6;
BFCN-3115+
CERAMIC BPF; Length: 3.2 mm; Height: .94 mm; Maximum Operating Temperature: 100 Cel; Maximum Insertion Loss: 3 dB; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch);
BFCN-3600+
CERAMIC BPF; Maximum Operating Temperature: 100 Cel; Length: 3.2 mm; Average Input Power: 1.5 W; I/O Impedance: 50 OHM; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch);
BFCN-4100+
CERAMIC BPF; Height: .94 mm; JESD-609 Code: e3; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Length: 3.2 mm; Maximum Insertion Loss: 2 dB;
BFCN-2700+
CERAMIC BPF; Attenuation At Minimum Frequency: 20 dB; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Mounting Type: SURFACE MOUNT; I/O Impedance: 50 OHM; Voltage Standing Wave Ratio: 2.8;
BFCN-1445+
CERAMIC BPF; Height: .94 mm; Maximum Insertion Loss: 3 dB; Minimum Attenuation Frequency (± Δf): 255000 kHz; Length: 3.2 mm; Attenuation At Minimum Frequency: 20 dB;
BFCN-1525+
BFCN-1525+ by Mini-circuits is a Ceramic BPF filter with 4 terminals. It offers attenuation of 20dB at min frequency and 30dB at max frequency. With a center frequency of 1525MHz, it is ideal for applications requiring precise filtering in the range of 475kHz to 655kHz.
BFCN-8450+
CERAMIC BPF; Minimum Operating Temperature: -55 Cel; Center/Cutoff Frequency (fo/fc): 8450 MHz; Height: .94 mm; Maximum Insertion Loss: 3.5 dB; Attenuation At Maximum Frequency: 30 dB;
BFCN-3010+
CERAMIC BPF; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Length: 3.2 mm; I/O Impedance: 50 OHM; Width (mm): 1.6; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch);
BFCN-1855+
CERAMIC BPF; Height: .94 mm; Maximum Attenuation Frequency (± Δf): 2025000 kHz; Attenuation At Minimum Frequency: 20 dB; Width (mm): 1.6; No. of Terminals: 4;
BFCN-2275+
CERAMIC BPF; Minimum Operating Temperature: -55 Cel; Average Input Power: 1.5 W; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Length: 3.2 mm; Attenuation At Maximum Frequency: 25 dB;
BFCN-7350+
CERAMIC BPF; No. of Terminals: 4; Minimum Attenuation Frequency (± Δf): 850000 kHz; Average Input Power: 2 W; I/O Impedance: 50 OHM; Height: .94 mm;
BFCN-7500+
CERAMIC BPF; Mounting Type: SURFACE MOUNT; Attenuation At Minimum Frequency: 18 dB; No. of Terminals: 4; Minimum Operating Temperature: -55 Cel; I/O Impedance: 50 OHM;
BFCN-7700+
CERAMIC BPF; Attenuation At Maximum Frequency: 20 dB; Dimensions: L3.2XB1.6XH0.94 (mm)/L0.126XB0.063XH0.037 (inch); Width (mm): 1.6; No. of Terminals: 4; Height: .94 mm;
BFCN-8000+
BFCN-8000+ by Mini-circuits is a ceramic BPF filter with 4 terminals. It offers 20 dB attenuation at max frequency of 2 MHz and has a center frequency of 8 GHz. Ideal for applications requiring surface mount filters with an impedance of 50 ohms.
BFCN-5750+
CERAMIC BPF; Length: 3.2 mm; Voltage Standing Wave Ratio: 1.25; Maximum Operating Temperature: 85 Cel; I/O Impedance: 50 OHM; Height: .94 mm;
BFCN-5540+
CERAMIC BPF; Voltage Standing Wave Ratio: 2.1; Maximum Insertion Loss: 4 dB; Center/Cutoff Frequency (fo/fc): 5540 MHz; Width (mm): 1.6; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved