Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LFL183G55TC2B908 is a Ceramic LPF filter with 0.8mm width, 1.6mm length, and 0.6mm height. It operates b/w -40 to 85°C, has a max insertion loss of 0.55 dB at 3550 MHz, and VSWR of 1.9 for applications in surface mount configurations requiring a 50Ω impedance.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Lantek
Speed Components Ltd
Nova Conductors
Legend Electronics Inc.
AZTECH Wire
$5.520
Perfect Parts
Alle Elektronik GmbH
Authorized Procurement Solutions
Bastille Electronics
This ceramic low-pass filter is ideal for applications requiring high temperature stability and low insertion loss.
With a wide operating temperature range, this filter can withstand extreme conditions.
The compact design of this filter makes it suitable for space-constrained applications.
Offers minimal signal loss for improved performance.
Designed for specific frequency filtering requirements.
Provides efficient power transfer with minimal reflection.
Compact size allows for easy integration into existing systems.
Can handle moderate power levels for reliable operation.
Offers convenient packaging for storage and transportation.
Easy to install on circuit boards for streamlined assembly processes.
Compatible with standard impedance requirements for seamless integration.
Low profile design is suitable for applications with limited vertical space.
Ceramic Filters LFL183G55TC2B908 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Voltage Standing Wave Ratio:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Pro-an Electronic
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Daco Semiconductor
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BAV99
CFWLA455KHFA-B0
Golledge Electronics
CERAMIC BPF; Length: 11.5 mm; Dimensions: L11.5XB7.5XH8 (mm); Additional Features: BULK; HIGH SELECTIVITY; Width (mm): 7.5; Maximum Insertion Loss: 6 dB;
SFECF10M7EA00-R0
Murata Manufacturing
SFECF10M7EA00-R0 by Murata: Ceramic BPF filter with 3dB max insertion loss, 10.7 MHz center frequency, and 6 terminals. Ideal for surface mount applications in electronics for impedance of 330Ω at -20 to 80°C temperature range.
CFWM455FY
CERAMIC BPF; Mounting Type: THROUGH HOLE MOUNT; Width (mm): 6.5; Dimensions: L9.5XB6.5XH6.3 (mm)/L0.374XB0.256XH0.248 (inch); Manufacturer Series: CFWM; Attenuation At Minimum Frequency: 6 dB;
CDSCB10M7GA119-R0
Murata Manufacturing's CDSCB10M7GA119-R0 is a Ceramic BPF filter with 2 terminals, measuring L4.5xB2.0xH1.0 mm. It operates at 10.7 MHz and is ideal for surface mount applications in electronic devices requiring precise frequency filtering capabilities.
LFCN-1800D-1+
Mini-circuits
LFCN-1800D-1+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 875 MHz. With a center frequency of 2125 MHz and insertion loss of 1 dB, it's ideal for RF applications requiring precise filtering in the range of 425-875 MHz. This surface-mount filter operates b/w -55°C to 100°C, making it suitable for various communication systems.
2450FM07A0029T
Johanson Technology
Johanson Technology's 2450FM07A0029T is a Ceramic LPF filter with 2450 MHz center frequency, 0.8 dB insertion loss, and 2 W power rating. Ideal for surface mount applications in the -40 to 85 °C temperature range, this filter has a compact size of 1mm x 0.5mm x 0.4mm.
LFCN-1800D+
LFCN-1800D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, attaining 40 dB attenuation at max frequency of 875 kHz. With a center frequency of 2125 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring precise filtering in compact spaces.
0900FM15D0039E
Johanson Technology's 0900FM15D0039E is a Ceramic BPF filter with 1.4 dB max insertion loss, operating from -40 to 85°C. Ideal for applications requiring a center frequency of 915 MHz, it has dimensions of 2x1.25x0.8 mm and supports up to 2W input power in surface mount configurations.
LFCN-3800
The Mini-circuits LFCN-3800 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.45 GHz. With a compact size of 3.2x1.6x0.94 mm, it's ideal for surface mount applications in RF circuits requiring precise filtering at frequencies up to 4.85 GHz.
HFCN-5500D+
HFCN-5500D+ by Mini-circuits is a ceramic filter with a cutoff frequency of 5500 MHz and attenuation of 30 dB at max frequency. It operates in temperatures ranging from -55 to 100 °C and is suitable for surface mount applications requiring high pass filtering.
LFCN-1700
The Mini-circuits LFCN-1700 is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring high performance in a compact surface mount package. Operating from -55°C to 100°C, this filter provides low insertion loss of 3 dB and can handle an average input power of 10 W.
LFCN-1700D+
LFCN-1700D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 450 MHz. With a center frequency of 2050 MHz and VSWR of 1.2, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
SFE10.7MS3-A
Murata's SFE10.7MS3-A is a Ceramic BPF filter with 20 dB attenuation at 10.7 MHz, 7 dB insertion loss, and 260 kHz max attenuation frequency. Measuring L7xB3xH7 mm, it has an I/O impedance of 330 OHM and is ideal for through hole mounting applications in electronic devices.
Murata Manufacturing's CFWLA455KHFA-B0 is a Ceramic BPF filter with 5 terminals, operating from -20 to 80°C. It has a center frequency of 0.455 MHz and max insertion loss of 6 dB. Ideal for applications requiring an I/O impedance of 2000 OHM, this filter is mounted through hole and measures L11.0xB7.0xH7.5 mm.
4700BP15A0600E
4700BP15A0600E by Johanson Technology is a Ceramic BPF filter with a center frequency of 4700 MHz, 0.9 dB insertion loss, and 3W power rating. It operates b/w -40°C to 85°C, ideal for surface mount applications in RF circuits requiring a compact design.
LFCN-800D
LFCN-800D by Mini-circuits is a ceramic LPF filter with 4 terminals. It has a center frequency of 990 MHz and an attenuation of 30 dB at its max frequency. This surface mount filter is commonly used in applications requiring a cutoff frequency of 410000 kHz and an I/O impedance of 50 Ω.
HFCN-880
The Mini-circuits HFCN-880 is a Ceramic HPF filter with 4 terminals, offering attenuation up to 40 dB at 380 MHz. With a compact size of L3.2XB1.6XH0.94 mm, it's ideal for surface mount applications in RF circuits requiring high-frequency filtering and impedance matching within the 50 OHM range.
LFCN-1200D
LFCN-1200D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 30 dB at max frequency. With cutoff frequency at 1530 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling up to 10 W.
SFSKA5M50CF00-R3
Murata Manufacturing's SFSKA5M50CF00-R3 is a Ceramic BPF filter with 5.5 MHz center frequency, 6 dB insertion loss, and -20 to 80°C operating temperature range. Ideal for surface mount applications in electronics requiring a compact ceramic filter solution.
HFCN-880+
The Mini-circuits HFCN-880+ is a Ceramic HPF filter with 40 dB attenuation at 380 kHz and 20 dB at 240 kHz. Operating from -55 to 100°C, it has a VSWR of 1.5 and insertion loss of 3 dB at 880 MHz. Ideal for surface mount applications in RF systems requiring precise frequency filtering.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LFL182G54TC1B838
CERAMIC LPF; Minimum No. of Sections: 1; Average Input Power: 3 W; Voltage Standing Wave Ratio: 2; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
LFL18829MTCRD627
CERAMIC LPF; Maximum No. of Sections: 1; Voltage Standing Wave Ratio: 1.7; Length: 1.6 mm; Maximum Insertion Loss: .88 dB; Width (mm): 0.8;
LFL152G45TCGR424
CERAMIC LPF; Voltage Standing Wave Ratio: 1.9; Average Input Power: 2 W; Minimum No. of Sections: 1; Length: 1 mm; Minimum Operating Temperature: -40 Cel;
LFL182G45TC3B746
LFL182G45TC3B746 by Murata Manufacturing is a ceramic LPF filter with a center frequency of 2450 MHz. It has a max insertion loss of 0.7 dB and can handle an average input power of 3 W. This filter is commonly used in applications requiring high-frequency signal filtering, such as wireless communication systems.
LFL182G50TC1B905
CERAMIC LPF; I/O Impedance: 50 OHM; Minimum No. of Sections: 1; Maximum No. of Sections: 1; Width (mm): 0.8; Packing Method: TR, PAPER, 7 INCH;
LFL183G55TC3C218
CERAMIC LPF; Voltage Standing Wave Ratio: 1.69; Width (mm): 0.8; Packing Method: TR, EMBOSSED, 7 INCH; Center/Cutoff Frequency (fo/fc): 3550 MHz; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved