Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Onsemi's AR0331SRSC00SUCA0-DPBR is a 2.2x2.2 um CMOS image sensor with 2048 (H) x 1536 (V) pixels and a 1/3 inch optical format. It operates at a max supply voltage of 1.95V, has a master clock of 48 MHz, and offers a dynamic range of 100 dB. Ideal for applications requiring high-resolution imaging at up to 60 fps in automotive cameras and surveillance systems.
Median Price
$15.965
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$15.730
100+ parts
-
1k+ parts
10k+ parts
Verical
Chip1Stop
$16.200
DigiKey
$22.960
$18.226
$17.115
Digiode
$14.944
Vyrian
VNN
Cyclops Electronics Ltd
Nova Conductors
Ampacity Inc.
$13.370
Corphita
$14.157
Corohmni
Kulean Microsystems
Authorized Procurement Solutions
Continental Prestige Electronics
Problanco Electronics
Argo Parts USA
TANS Electronics
SupplyDigital Components
UHIMA Technologies
Netroflash
Larger pixel size allows for better light sensitivity and can result in higher quality images with less noise.
Higher maximum supply voltage provides more flexibility in power supply design and operation.
High master clock frequency enables fast image processing and data transfer.
Compact body width allows for easy integration into various devices and applications.
CMOS image sensor technology offers low power consumption and high-quality image output.
Low body height enables slim and compact design for the overall product.
Square package shape provides easy mounting and alignment during production.
Low minimum supply voltage helps in reducing power consumption and increasing efficiency.
Wide output range allows for capturing a broad range of light intensities with good signal-to-noise ratio.
Digital voltage output simplifies signal processing and interfacing with other devices.
Wide operating temperature range ensures the sensor functions reliably in various environments.
Higher maximum operating current supports the processing power and performance of the image sensor.
Lightweight and durable plastic housing offers protection and ease of handling of the image sensor.
High dynamic range allows for capturing details in both bright and dark areas of the image.
Higher vertical pixel count results in sharper and more detailed images.
Compact body length/diameter makes it suitable for space-constrained applications.
1/3 inch optical format is commonly used and compatible with various lenses and optical systems.
Solder termination ensures secure and reliable connection during installation and operation.
2-wire interface simplifies communication with external devices and microcontrollers.
High frame rate of 60 fps enables smooth and fast capture of moving objects or scenes.
Frame array type allows for simultaneous capture of multiple frames for high-quality video or imaging.
Surface mounting feature offers easy and secure installation on PCBs or electronic boards.
Image Sensors AR0331SRSC00SUCA0-DPBR attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Housing:
Master Clock:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Range:
Output Type:
Package Shape or Style:
Pixel Size (um):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Loras Industries
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Micro Commercial Components
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Plessey Semiconductors Discrete Components Div
MT9V024IA7XTR
Onsemi
MT9V024IA7XTR by Onsemi is an image sensor with 6x6 um pixel size, 27 MHz master clock, and 752 horizontal pixels. It is ideal for applications requiring a digital voltage output interface, such as surveillance cameras, automotive vision systems, and industrial imaging devices.
KAI-1020-AAA-JP-BA
KAI-1020-AAA-JP-BA by Onsemi is an image sensor with 1000x1000 pixels, 7.4um pixel size, and 58dB dynamic range. Ideal for applications requiring high-resolution imaging such as industrial machine vision systems or medical imaging equipment.
NOIM2SM9600A-QDC
NOIM2SM9600A-QDC by Onsemi is a 3840x2500 CMOS image sensor with 2.4x2.4 um pixel size, ideal for high-resolution imaging applications. It operates at 1.6-2V, with a master clock of 62 MHz and offers a dynamic range of 54 dB. The sensor has an SPI interface, supports up to 62 Mbps data rate, and can achieve a frame rate of 20 fps in a compact square package suitable for surface mounting.
NOIV1SN2000A-QDC
NOIV1SN2000A-QDC by Onsemi features 4.80X4.80 um pixel size, 62 MHz master clock, and 1920 horizontal pixels. This image sensor is ideal for applications requiring high-resolution imaging with a max supply voltage of 2V and operating temperature range of 0-70°C.
AR0234CSSC28SUKA0-CR
AR0234CSSC28SUKA0-CR by Onsemi is a CMOS image sensor with 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It operates at -40 to 85 °C and has a frame rate of 120 fps. Ideal for applications requiring high-quality digital imaging in automotive, surveillance, and industrial systems.
KAI-16000-AXA-JD-B2
KAI-16000-AXA-JD-B2 by Onsemi is an image sensor with 7.4x7.4 um pixel size, 65 dB dynamic range, and 4872 horizontal pixels. It is ideal for applications requiring high-resolution imaging such as industrial machine vision systems or scientific cameras.
MT9V024IA7XTM-DR
MT9V024IA7XTM-DR by Onsemi is a 1/3-inch CMOS image sensor with 752x480 pixels, offering a dynamic range of 100 dB. Operating at -40 to 105°C, it has a frame rate of 60 fps and digital voltage output interface. Ideal for applications requiring high-quality imaging in varying temperature conditions.
MT9M021IA3XTMZ-TPBR
MT9M021IA3XTMZ-TPBR by Onsemi is a 1/3 inch CMOS image sensor with 1280x960 resolution, 3.75um pixel size, and 50MHz master clock. Ideal for applications requiring high-quality digital imaging at up to 60fps, it operates b/w -30 to 70°C with a dynamic range of 64dB.
NOIP1SN0500A-QDI
NOIP1SN0500A-QDI by Onsemi is an image sensor with 4.80x4.80 um pixel size, 72 MHz master clock, and 800x600 resolution. It operates at a voltage range of 1.7-1.9V and is ideal for digital imaging applications requiring high frame rates and dynamic range.
OVM7695-RYEA
Omnivision Technologies
IMAGE SENSOR,CMOS;
NOIS1SC1000A-HHC
NOIS1SC1000A-HHC by Onsemi is a 1024x1024 CMOS image sensor with 15x15 um pixel size. It outputs analog voltage at 11 fps with a max operating current of 60.8 mA. Housed in a ceramic package, it is ideal for surface mount applications in frame array setups.
NOII4SM014KA-GEC
NOII4SM014KA-GEC by Onsemi is an 8x8 um CMOS image sensor with a max supply voltage of 3.6V and output range of 0-3.3V. It operates b/w 0-70 °C, offering a dynamic range of 65.4 dB. Ideal for applications requiring a frame rate of 3.25 fps, such as surveillance cameras or industrial imaging systems.
AR0144CSSM00SUKA0-CPBR
The Onsemi AR0144CSSM00SUKA0-CPBR is a 1/4 inch CMOS image sensor with 1280x800 resolution and 3x3 um pixel size. It features a 2-wire interface, solder termination, and operates at 60 fps. Ideal for surface mount applications in devices requiring high-quality imaging capabilities.
KAI-2020-FBA-CP-AE
KAI-2020-FBA-CP-AE by Onsemi is an image sensor with 7.4x7.4 um pixel size, offering a dynamic range of 68 dB and 1600x1200 resolution. Ideal for applications requiring high-quality imaging in a compact form factor, this CCD sensor operates b/w -50 to 70 °C with supply voltage ranging from 14.5V to 15.5V.
TCD1254GFG(8Z,AA)
Toshiba
Toshiba TCD1254GFG(8Z,AA) Image Sensor features 5.25X64 um pixel size, 1.5-3.0V digital voltage output range, and 52.04 dB dynamic range. Ideal for applications requiring high sensitivity (103 V/lx.s), such as surface mount linear array CCD sensors in imaging systems with spectral response of 400-1100 nm.
KAI-1020-CBA-FD-AE
KAI-1020-CBA-FD-AE by Onsemi is a 7.4x7.4 um CCD image sensor with 1000x1000 resolution, offering a dynamic range of 58 dB and outputting analog voltage at 500mV. Ideal for applications requiring high-quality imaging such as industrial machine vision systems or medical diagnostic equipment.
MT9M131C12STC-MI-DR
MT9M131C12STC-MI-DR by Onsemi is an image sensor with 1280x1024 resolution, 3.6um pixel size, and 54MHz master clock. Ideal for digital cameras, surveillance systems, and industrial imaging applications due to its high sensitivity (1V/lx.s), wide dynamic range (71dB), and compact square package design.
KAF-16801-AAA-DP-AE
The Onsemi KAF-16801-AAA-DP-AE is a square image sensor with 4096x4096 pixels, offering a pixel size of 9x9 µm and a dynamic range of 76 dB. It operates b/w -60 to 60 °C, suitable for high-resolution imaging applications requiring precise color capture and low light sensitivity. The sensor features a full-frame array design and can achieve data rates up to 10 Mbps, making it ideal for professional digital photography and scientific imaging projects.
NOIL1SM0300A-QDC
NOIL1SM0300A-QDC by Onsemi is an Image Sensor with 640x480 resolution, 9.9um pixel size, and 80MHz master clock. Ideal for digital output applications, it operates b/w -40 to 70°C temperature range and offers a dynamic range of 61dB.
KAI-08051-ABA-JP-BA
KAI-08051-ABA-JP-BA by Onsemi is an image sensor with 5.5x5.5 um pixel size, 3364 horizontal pixels, and 2520 vertical pixels. It operates b/w -50 to 70 °C and has a dynamic range of 66 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AR0330CS1C12SPKA0-CP2
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.40V; Horizontal Pixel: 2304;
AR0330CM1C00SHAA0-DR
The Onsemi AR0330CM1C00SHAA0-DR is a 1/3-inch CMOS image sensor with 2304x1296 pixels. It operates at a max supply voltage of 1.9V and offers a dynamic range of 69.5 dB. Ideal for applications requiring high-resolution imaging, such as surveillance cameras and industrial machine vision systems.
AR0330CSSC12SPBA0-DR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-2.40V; Housing: PLASTIC;
AR0331SRSC00XUEE0-DPBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.84-1.96V; Maximum Operating Temperature: 85 Cel;
AR0330CM1C12SUD20
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Output Range: 0.4-1.4V; Vertical Pixel: 1536; Horizontal Pixel: 2304;
AR0330CM1C00SHKA0-CP
The Onsemi AR0330CM1C00SHKA0-CP is a 1/3-inch CMOS image sensor with 2304 (H) x 1296 (V) pixels. It operates at a max supply voltage of 1.9V and has a dynamic range of 69.5 dB. Ideal for applications requiring high-resolution imaging with a frame rate of up to 60 fps, such as surveillance cameras and industrial machine vision systems.
AR0330CM1C21SHKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.40V; Additional Features: ELECTRONIC ROLLING SHUTTER, IT ALSO OPERATES AT ANALOG SUPPLY VOLTAGE 2.7-2.9V;
AR0330CM1C21SUD20
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Output Range: 0.4-1.4V; Minimum Supply Voltage: 1.7 V; Master Clock: 24 MHz;
AR0323ATSB17XUEA0-DRBR-E
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-2.40V; Pixel Size (um): 3X3;
AR0330CM1C00SHAA0-DP2
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Output Interface Type: 2-WIRE INTERFACE;
AR0330CM1C12SHAA0-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Body Height: 2.275 mm;
AR0330CM1C12SHKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.40V; Termination Type: SOLDER;
AR0330CM1C00SHAA0-TP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Array Type: FRAME;
AR0330CM1C21SHKA0-CP
The Onsemi AR0330CM1C21SHKA0-CP image sensor features 2.2x2.2 um pixel size, 27 MHz master clock, and 2304 horizontal pixels. Ideal for applications requiring a digital voltage output interface, this CMOS sensor offers a dynamic range of 69.5 dB and operates b/w -30 to 70°C temperatures.
AR0330CM1C00SHAA0-DP1
AR0330CM1C12SHAA0-DP1
AR0330CM1C12SHAA0-DR
AR0330CM1C12SHAA0-DR1
AR0330CM1C00SHKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.40V; JESD-609 Code: e1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved